Panasonic Sdr H20 Operating Instructions Manual

							71LSQT1190
Editing
2Select [ALL] or [SELECT] and 
press the joystick.
≥When [ALL] is selected, the selected playlist 
will be erased. Proceed to step 5.
3(Only when [SELECT] is selected in step 2)
Select the scene to be deleted, 
then press the joystick.
The selected scene is encircled by a red frame.
≥When the joystick is pressed again, the 
selected scene will be canceled.
≥Up to 50 scenes can be set in succession.
4(Only when [SELECT] is selected in step 2)
Press the   button.
5When the confirmation message 
appears, select [YES], then press 
the joystick.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To cancel deleting halfway
Press the MENU button.
≥Scenes are deleted from the last scene on the 
thumbnail display. The scenes that have 
already been deleted when the deletion is 
canceled cannot be restored.
To complete editing
Press the MENU button.
≥You can also delete scenes by pressing the 
MENU button, selecting [EDIT] # [DELETE] 
and then selecting [ALL] or [SELECT].
≥Deleting scenes on a playlist will not increase 
the remaining capacity for recording.
≥The playlist itself is deleted if you delete all the 
scenes in it.≥When a playlist is deleted, the number of each 
subsequent playlist decreases by one.
Editing still pictures
[HDD] [SD]
The deleted files cannot be restored.
¬Rotate the mode dial to select  .
¬Select [HDD] or [SD CARD] in [MEDIA 
SELECT].
1Press the   button during 
playback.
2When the confirmation message 
appears, select [YES], then press 
the joystick.
¬Rotate the mode dial to select  .
¬Select [HDD] or [SD CARD] in [MEDIA 
SELECT].
Deleting still picture files
This is for deleting still picture files.
Deleting files one at a time
Deleting multiple files from the 
thumbnail display
LSQT1190(ENG).book  71 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							72LSQT1190
Editing
1Press the   button in the 
thumbnail display. 
2Select [ALL] or [SELECT] and 
press the joystick.
≥When [ALL] is selected, all files on the medium 
except the locked files will be erased. Proceed 
to step 5.
3(Only when [SELECT] is selected in step 2)
Select the file to be deleted, then 
press the joystick.
The selected file is encircled by a red frame.
≥When the joystick is pressed again, the 
selected file will be canceled.
≥Up to 50 files can be set in succession.
4(Only when [SELECT] is selected in step 2)
Press the   button.
5When the confirmation message 
appears, select [YES], then press 
the joystick.
(Only when [SELECT] is selected in step 2)
To continue deleting other files
Repeat steps 3-5.
To cancel deleting halfway
Press the MENU button.
≥Files are deleted from the last file on the 
thumbnail display. The files that have already been deleted when the deletion is canceled 
cannot be restored.
To complete editing
Press the MENU button.
∫Deleting still picture files recorded on an 
SD card by other products
A still picture file (other than JPEG) that cannot 
be played back on this unit may be erased.
≥You can also delete files by pressing the 
MENU button, selecting [DELETE] and then 
selecting [ALL] or [SELECT].
≥In case of [ALL], the deletion may take time if 
there are many files.
≥Do not turn off this unit while deleting.
≥When you delete files, use a battery with 
sufficient battery power or use the AC adaptor.
≥Do not open the card slot cover while deleting 
files recorded on an SD card. The deletion will 
stop.
≥If files conforming to DCF standard are 
deleted, all the data related to the files will be 
deleted.
[HDD] [SD]
Still picture files can be locked so that they are 
not deleted by mistake. (However, please be 
aware that if a medium is formatted, then all the 
data on the medium will be erased.)
¬Rotate the mode dial to select  .
¬Select [HDD] or [SD CARD] in [MEDIA 
SELECT].
Locking still picture files
This is for preventing still picture files 
from being deleted by mistake.
LSQT1190(ENG).book  72 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							73LSQT1190
Editing
1Press the MENU button, then 
select [PICT. SETUP] # [LOCK 
SET] # [YES] and press the 
joystick.
2Select the file to be protected, 
then press the joystick.
[ ] display appears and the selected file is 
locked.
≥Press the joystick again to release the lock 
setting.
≥You can also select multiple files in succession.
To complete the settings
Press the MENU button.
[SD]
You can write the data of the still pictures to be 
printed and the number of prints (DPOF data) 
onto the SD card.
¬Rotate the mode dial to select  .
¬Select [SD CARD] in [MEDIA 
SELECT].
1Press the MENU button, then 
select [PICT. SETUP] # [DPOF SET] # [SET] and press 
the joystick.
2Select the file to be set, then 
press the joystick.
The number of prints set to be in DPOF is 
displayed.
3Move the joystick up or down to 
select the number of prints, then 
press the joystick.
≥You can select from 0 to 999. (The selected 
number of pictures can be printed with the 
printer supporting DPOF.)
≥To cancel the setting, set the number of prints 
to [0].
≥You can also select multiple files in succession.
To complete the settings
Press the MENU button.
To cancel all DPOF settings
Press the MENU button, then select 
[PICT. SETUP] # [DPOF SET] # 
[CANCEL ALL] and press the joystick.
≥When the confirmation message appears, 
select [YES], then press the joystick.
∫What is DPOF?
DPOF stands for Digital Print Order Format. This 
enables picture printing information to be written 
onto an SD card so that it can be used on a 
system supporting DPOF.
DPOF setting
This is for writing the printing data on 
an SD card.
MENU
MENU
LSQT1190(ENG).book  73 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							74LSQT1190
Editing
≥The DPOF setting can be established for up to 
999 files.
≥DPOF setting made on other devices may not 
be recognized by this unit. Please perform the 
DPOF settings on this unit.
≥You cannot add the recording date to pictures 
to be printed with the DPOF settings.
[HDD] [SD]
¬Rotate the mode dial to select  .
1Press the MENU button, then 
select [PICT. SETUP] # [COPY] 
# desired direction and press 
the joystick.
2Select [SELECT] or [ALL] and 
press the joystick.
≥When [ALL] is selected, all still picture files in 
the HDD or SD card will be copied. Proceed to 
step 5.
3(Only when [SELECT] is selected in step 2)
Select the file to be copied, then 
press the joystick.
The selected file is encircled by a red frame.
≥When the joystick is pressed again, the 
selected file will be canceled.
≥Up to 50 files can be set in succession.
≥The files are copied in the order that they were 
selected.
4(Only when [SELECT] is selected in step 2)
Press the MENU button.
5When the confirmation message 
appears, select [YES], then press 
the joystick.
Copying of the file starts.
(Only when [SELECT] is selected in step 2)
To continue copying other files
Repeat steps 3-5.
To cancel copying halfway
Press the MENU button.
To complete editing
Press the MENU button.
≥The copied files are recorded after the still 
picture files in the copy destination. (The file 
names or the folder names will differ from the 
original file.)
≥The lock and DPOF settings of the file cannot 
be copied.
≥In case of [ALL], the copy may take time if 
there are many files.
≥Do not turn off this unit while copying.
≥When you copy files, use a battery with 
sufficient battery power or use the AC adaptor.
≥Do not open the card slot cover while copying. 
The copying will stop.
Copying still picture files
This is for copying still picture files 
from the HDD to an SD card or vice 
versa.
Copying from the HDD to an SD card
Copying from an SD card to the HDD
MENU
LSQT1190(ENG).book  74 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							75LSQT1190
HDD and card management
HDD and card managemen t
HDD management
[HDD]
Please be aware that if the HDD is formatted, 
then all the data recorded on the HDD will be 
erased. Store important data on a computer, etc.
¬Rotate the mode dial to select  .
¬Select [HDD] in [MEDIA SELECT].
1Press the MENU button, then 
select [SETUP] # 
[FORMAT HDD] # [YES] and 
press the joystick.
2When the confirmation message 
appears, select [YES], then press 
the joystick.
≥When formatting is complete, press the MENU 
button to exit the message screen.
≥During formatting, do not turn this unit off.
≥When you format the HDD, use a battery with 
sufficient battery power or the AC adaptor.
≥During formatting, do not cause any vibrations 
or impacts to this unit.
[HDD]
Information concerning the space used and 
remaining on the HDD is displayed.
¬Rotate the mode dial to select  .
¬Select [HDD] in [MEDIA SELECT].
Press the MENU button, then select 
[SETUP] # [INFORMATION] # 
[YES] and press the joystick.
To exit the information screen
Press the MENU button.
≥The 30 GB hard drive utilizes a portion of the 
storage space for formatting, file management 
and other purposes. 30 GB is 30,000,000,000 
bytes. Usable capacity will be less.
Card management 
[SD]
Please be aware that if an SD card is formatted, 
then all the data recorded on the card will be 
erased. Store important data on a computer, etc.
¬Select [SD CARD] in [MEDIA 
SELECT].
1Press the MENU button, then 
select [SETUP] # 
[FORMAT CARD] # [YES] and 
press the joystick.
Formatting HDD
This is for initializing HDD.
Displaying HDD information
MENU
Formatting an SD card
This is for initializing cards.
MENU
MENU
LSQT1190(ENG).book  75 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							76LSQT1190
HDD and card management
2When the confirmation message 
appears, select [YES], then press 
the joystick.
≥When formatting is complete, press the MENU 
button to exit the message screen.
≥Use this unit to format SD cards. If an SD card 
is formatted on other products (such as a 
computer), the time spent for recording may 
become longer and you may not be able to use 
the SD card.
≥Depending on the type of SD card being used, 
it may take time to format.
≥During formatting, do not turn this unit off.
≥When you format the SD card, use a battery 
with sufficient battery power or the AC adaptor.
≥Do not open the card slot cover while 
formatting. The formatting will stop.
LSQT1190(ENG).book  76 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							77LSQT1190
With other products
With other pro ducts
With a TV
[HDD] [SD]
The motion pictures and still pictures recorded by 
this unit can be played back on a TV.
≥Use the AC adaptor to free you from worrying 
about the battery running down.
1Connect this unit and a TV.
AAV/S cable (supplied)
≥Insert the plugs as far as they will go.
* If the TV has an S Video terminal, also connect 
the S Video plug to it. This allows you to enjoy 
more beautiful pictures.
2Turn on this unit, then rotate the 
mode dial to select   or  .
3Press the MENU button, then 
select [MEDIA SELECT] # [HDD] 
or [SD CARD] to select the 
desired medium and press the 
joystick.
4Change the input channel on the 
TV.
≥The channel set will differ depending on the 
terminal to which the unit is connected.
5Start playback on this unit.
The image and audio are output on the TV.
∫If the image or audio from this unit is not 
output on the TV
≥Check that the plugs are inserted as far as they 
go.
≥Check the connected terminal.
≥Check the TV’s input setting (input switch). 
(For more information, please read the 
operating instructions for the TV.) 
≥If you have a TV with an SD card slot, the 
motion pictures and still pictures recorded on 
an SD card may be played back on the TV. 
(Refer to the operating instructions of the TV 
for details about TV compatibility.)
≥If the images are not displayed correctly on a 
wide-screen TV, adjust the aspect setting on 
the TV. (Refer to the operating instructions of 
the TV for details.) If the pictures are displayed 
squeezed horizontally on a regular TV (4:3), 
change the [TV ASPECT] setting on this unit. 
(lbelow)
∫To watch images with a 16:9 
aspect ratio on a regular TV (4:3)
When playing back motion pictures recorded with 
a 16:9 aspect ratio ([ASPECT] was set to [16:9]) 
or still pictures recorded with a 16:9 aspect ratio 
([PICTURE SIZE] was set to [ ] (SDR-H200)/
[ ] (SDR-H20/SDR-H18)) on a TV with a 4:3 
aspect ratio, the images may be squeezed 
horizontally. In this case, change the menu 
setting to play back the pictures in the original 
aspect ratio. (Depending on the TV setting, the 
pictures may not be displayed correctly. For 
more information, please read the operating 
instructions of your TV.)
Press the MENU button, then select 
[SETUP] # [TV ASPECT] # [4:3] 
and press the joystick.
Playback on TV
VIDEO IN S VIDEO IN
*
AUDIO IN
A
2
0.2
LSQT1190(ENG).book  77 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							78LSQT1190
With other products
Example of images with a 16:9 aspect ratio on 
a regular TV (4:3)
≥This function’s default setting is [16:9].
∫To display the on-screen 
information on the TV 
(SDR-H200)
The information displayed on the screen 
(operation icon and time code, etc.) can be 
displayed on the TV.
Press the EXT DISPLAY button on 
the remote control.
≥Press the button again to erase the 
information.
≥The screen on this unit will not change.
With a DVD recorder
[SD]
If you have a DVD recorder with an SD card slot, 
images recorded by this unit can be copied 
(dubbed) onto the hard disk or a DVD disc.
Refer to the operating instructions of your DVD 
recorder for information about whether or not it 
supports copying (dubbing) from an SD card.≥If your DVD recorder does not support copying 
(dubbing) from an SD card or you want to copy 
(dub) images on the HDD of this unit, connect 
this unit and the DVD recorder with the AV/S 
cable (supplied) and then copy (dub). 
(lbelow)
Insert the SD card into the SD card 
slot on the DVD recorder, then copy 
(dub) the contents onto the hard 
disk or a disc.
≥For details on how to copy (dub) the images, 
refer to the operating instructions of the DVD 
recorder.
With a VCR
[HDD] [SD]
You can record (dub) images played back on this 
unit onto other video devices.
You can create a playlist by gathering the scenes 
on the HDD that you want to record (dub), then 
record (dub) the scenes in this playlist only to 
other devices. (l68)
≥Use the AC adaptor to free you from worrying 
about the battery running down.
[TV ASPECT] setting
[16:9][4:3]
Copying (dubbing) 
recordings onto a DVD 
recorder
ZOOM START/
STOP PHOTO
SHOT EXT
DISPLAY
DATE/
TIME
VOL
If you record (dub) images directly from the 
SD card or with the AV/S cable and then play 
them back on a wide-screen TV, they may be 
squeezed horizontally. In this case, refer to 
the operating instructions of the device you 
are recording (dubbing) to or read the 
operating instructions of the wide-screen TV 
and set the aspect setting to 16:9 (Full).
Recording (dubbing) images 
onto other video devices
LSQT1190(ENG).book  78 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							79LSQT1190
With other products
1Connect this unit and a video 
device.
AAV/S cable (supplied)
≥Insert the plugs as far as they will go.
* If the video device has an S Video terminal, 
also connect the S Video plug into it. This 
allows you to enjoy more beautiful pictures.
2Turn on this unit, then rotate the 
mode dial to select  .
3Press the MENU button, then 
select [MEDIA SELECT] # [HDD] 
or [SD CARD] to select the 
desired medium and press the 
joystick.
4Change the input channel on the 
video device and TV.
≥The channel set will differ depending on the 
terminal to which the unit is connected.
5Start playback on this unit.
Then start recording on the 
connected device.
≥See the operating instructions of the video 
device for details.
To stop recording (dubbing)
Stop recording on the connected device.
Then stop playback on this unit.
≥If the date and time display and function 
indication are unnecessary, cancel them 
before recording (dubbing). (SDR-H200) 
(l36, 78)
With a printer (PictBridge)
[HDD] [SD]
To print pictures by directly connecting this unit to 
the printer, use a printer compatible with 
PictBridge. (Read the operating instructions for 
the printer.) 
¬Connect this unit to the AC adaptor 
and turn on the unit.
1Connect this unit and a printer.
AUSB cable (supplied)
≥Insert the plugs as far as they will go.
≥Do not use any other USB cables except the 
supplied one. (Operation is not guaranteed 
with any other USB cables.)
The USB function selection screen will appear.
2Select [PictBridge] # [HDD] or 
[SD CARD] and press the 
joystick.
The [ ] indication appears on this unit’s 
screen.
VIDEO IN S VIDEO IN
*
AUDIO IN
A
A
LSQT1190(ENG).book  79 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							80LSQT1190
With other products
3Select a file to be printed, then 
press the joystick.
The number of pictures set is displayed.
4Move the joystick up or down to 
select the desired number of 
prints, then press the joystick.
≥You can set up to 9 prints.
≥To cancel the setting, set the number of prints 
to [0].
≥Up to 8 files displayed on a page can be set in 
succession by repeating steps 3 and 4.
5Press the MENU button to 
display the PictBridge menus.
6Select the date print setting on 
[DATE PRINT].
≥If the printer is not capable of date printing, this 
setting is unavailable.
7Select the paper size setting on 
[PAPER SIZE].
≥You cannot set paper sizes not supported on 
the printer.
8Select the layout setting on 
[PAGE LAYOUT].
≥You cannot set page layouts not supported on 
the printer.
9Select [PRINT] # [YES] and 
press the joystick.
The pictures are printed.
≥Exit PictBridge by disconnecting the USB cable 
after the pictures have been printed.
When you want to stop printing halfway
Move the joystick down.
A confirmation message appears. If [YES] is 
selected, the number of prints set is canceled 
and the screen returns to step 3. If [NO] is 
selected, all the settings are kept and the screen 
returns to step 3.
≥Avoid the following operations during printing. 
These operations disable proper printing. 
jDisconnecting the USB cable
jOpening the card slot cover
jSwitching the mode dial
jTurning off the power
≥Check the settings for the paper size, quality of 
print, etc. on the printer.
≥The sides of pictures recorded when [ ] 
(SDR-H200)/[ ] (SDR-H20/SDR-H18) is 
set may be cut at printing. Check before 
printing.
When using a printer with a trimming or 
borderless printing function, cancel this 
function before printing. (Refer to the operating 
instructions of the printer for details.) [STANDARD]:Size specific to the printer
[4t5 INCH]:L size
[5t7 INCH]:2L size
[4t6 INCH]:Postcard size
MENU
[A4]:A4 size
[STANDARD]:Layout specific to the printer
[]:No frame print
[]:Frame print
2
0.2
LSQT1190(ENG).book  80 ページ  ２００７年１月１３日　土曜日　午後３時３２分