Panasonic Sdr H20 Operating Instructions Manual

							Others
111LSQT1190
Can I write data from a computer onto the unit’s HDD or SD card?
No, you cannot.
This unit’s USB terminal is read only.
Is playback possible on a computer? (Windows)
Use ImageMixer3.
Is editing possible on a computer? (Windows)
Use ImageMixer3.
≥Motion pictures that have been saved to the ImageMixer3 library can be edited.
Can I use the DVD COPY function to copy still pictures as well? (Windows)
Yes, you can.
The motion pictures are recorded first onto the disc and then the still pictures are 
converted to motion pictures and recorded after the motion pictures. Original still picture 
files (JPEG files) are also recorded onto the DVD disc.
Can I use the DVD COPY function to copy motion pictures recorded on SD cards onto 
DVD discs as well? (Windows)
No, you cannot.
You can use the DVD COPY function to copy only the images recorded on the HDD.
Can I make additions to a DVD disc on which data has already been written? (Windows)
You can when you record data in the DVD-VR format onto a DVD-RAM or DVD-RW disc.
If you record data in the DVD-Video format onto a DVD-RW or iRW disc on which data 
has already been written, a message asking you to confirm whether the disc contents are 
to be erased will appear. You cannot write additional data on the disc without erasing its 
contents.
Is playback possible on a computer (Macintosh)?
Motion pictures:
Use ImageMixer3.
Still pictures:
Use picture viewer software.
LSQT1190(ENG).book  111 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							Others
11 2LSQT1190
Is editing possible on a computer (Macintosh)?
Use ImageMixer3.
≥Motion pictures that have been saved to the ImageMixer3 library can be edited.
Is it possible to save data to a computer (Macintosh)?
Motion pictures:
Use ImageMixer3.
Still pictures:
Copy with the Finder.
Can I use the DVD COPY function with a Macintosh as well? (Macintosh)
No, this function can be used only with Windows.
Can I make additions to a DVD disc on which data has already been written? 
(Macintosh)
If you record data in the DVD-Video format onto a DVD-RW or iRW disc on which data 
has already been written, a message asking you to confirm whether the disc contents are 
to be erased will appear. You cannot write additional data on the disc without erasing its 
contents.
LSQT1190(ENG).book  112 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							Others
113LSQT1190
Troubleshooting
ProblemCheck points
This unit cannot be 
turned on.≥Is the battery fully charged?
#Charge the battery using the AC adaptor. (l25)
≥The battery protection circuit may have operated. Attach the 
battery to the AC adaptor for 5 to 10 seconds. If the unit still 
cannot be used, the battery is faulty.
≥Is the LCD monitor opened?
This unit is turned off 
automatically.≥If you do not use the unit for approximately 5 minutes, the 
power is automatically turned off to conserve the battery 
charge. To resume recording, turn the power back on.
The power will not turn off automatically when the power save 
function (l103) is set to [OFF].
This unit does not stay 
on long enough.≥Is the battery low?
#If the remaining battery power indication is flashing or the 
message “LOW BATTERY.” is displayed, the battery has run 
down. Charge the battery. (l25)
A clicking sound is heard 
when the power is turned 
off.≥This is the sound of the lens moving and is not a malfunction.
Battery runs down 
quickly.≥Is the battery fully charged?
#Charge it with the AC adaptor. (l25)
≥Are you using the battery in an extremely cold place?
#The battery is affected by ambient temperature. In cold places, 
the operating time of the battery becomes shorter.
≥Has the battery worn out?
#The battery has a limited life. If the operating time is still too short 
even after the battery is fully charged, the battery has worn out 
and can no longer be used. 
This unit cannot be 
operated though it is 
turned on.
This unit does not 
operate normally.≥The unit cannot be operated unless you open the LCD monitor.
≥Remove the SD card then press the RESET button. (l116) If 
normal conditions are not restored yet, remove the battery or 
AC adaptor, wait about 1 minute and then reconnect the 
battery or AC adaptor. Then about 1 minute later, turn on the 
power again. (Conducting the above operation when the 
access lamp is on may destroy the data on the HDD or card.)
The screen has changed 
suddenly.≥Has the demonstration started?
#If you set [DEMO MODE] to [ON] without inserting a card in 
video recording mode or picture recording mode, the unit is 
automatically set to the demonstration mode for introducing its 
functions. Normally this should be set to [OFF]. Press the MENU 
button, then select [SETUP] # [DEMO MODE] # [OFF] and 
press the joystick.
LSQT1190(ENG).book  113 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							Others
11 4LSQT1190
The remote control does 
not function.≥Has the button-type battery of the remote control run out? 
#Replace it with a new button-type battery. (l19) 
A function indication 
such as the remaining 
time indication or the 
elapsed time indication is 
not shown.≥If you set [SETUP]>[DISPLAY]>[OFF], indications other than 
warnings and date indications disappear.
Recording does not start 
although power is 
supplied to this unit.≥Has the SD card’s write protect switch been set to LOCK?
#No recording is possible while the write protect switch is set to 
LOCK. (l22)
≥Is the memory of the HDD or card full?
#If the HDD or card has no more available memory, free up some 
memory by deleting unnecessary scenes (l66, 71) or use a 
new card.
≥Is the unit set to the video recording mode or picture recording 
mode?
#No recording is possible unless the mode dial is at   or  .
≥Is the card slot cover open?
#If the cover is open, this unit may not operate normally. Close the 
card slot cover.
Recording starts but 
stops immediately.
The playback picture 
breaks up for a moment.≥The unit is hot. Follow the messages on the display.
#To use the unit again, turn the unit off and leave it for a while.
The unit arbitrarily stops 
recording.≥Is the AGS function activated? 
#Record in the normal horizontal position or set [AGS] to [OFF]. 
(l40) 
≥Can the SD card be used for motion picture recording?
#Use an SD card that can be used for motion picture recording. 
(l22)
The operation arbitrarily 
stops.≥The drop detection function has activated to protect the HDD.
#Do not drop or shake this unit while operating it.
Recording stops 
suddenly during motion 
picture recording on a 
card.≥When using an SD card on which data has been written many 
times and the data writing speed has reduced, the recording 
may suddenly stop during motion picture recording.
#Use a card recommended as suitable for motion picture 
recording. (l22)
If the recording stops even when a suitable SD card is used, 
back up the data on the card to a computer, etc. and then format 
the card. (l75)
ProblemCheck points
LSQT1190(ENG).book  114 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							Others
115LSQT1190
Recorded still pictures 
are not clear.≥Are you trying to record small or finely detailed objects with 
[PICT. QUALITY] set at [ ]?
#If you try to record small or finely detailed objects with 
[PICT. QUALITY] set at [ ], the images may break up into a 
mosaic-like pattern. Record with [PICT. QUALITY] set at [ ] 
instead. (l47)
Auto focus function does 
not work.≥Is manual focus mode selected?
#Set the AUTO/MANUAL/FOCUS switch to AUTO.
≥Are you trying to record a scene which is hard to bring into 
focus in auto focus mode?
#There are some recording subjects and surroundings for which 
the auto focus does not operate correctly. (l122) If so, use the 
manual focus mode to adjust the focus. (l56)
“OPEN LENS COVER.” is 
displayed.≥Have you left the lens cover closed?
#Open the lens cover before turning the unit on.
≥This message may appear if you try to record in extremely dark 
places.
Sound is not played back 
from the built-in speaker 
of this unit.≥Is the volume too low?
#During playback, move the volume lever to display the volume 
indication and adjust it. (l62)
Although this unit is 
correctly connected to a 
TV, playback images 
cannot be seen.
The playback images are 
squeezed horizontally.≥Have you selected video input on the TV? 
#Please read the operating instructions of your TV and select the 
channel that matches the input used for the connection.
≥Is the [TV ASPECT] setting correct?
#Change the setting to match the aspect ratio of the TV.
Press the MENU button, then select [SETUP] # [TV ASPECT] 
# [16:9] or [4:3] and press the joystick.
Scenes or files cannot be 
deleted or edited.≥Are the scenes or the files locked?
#Locked scenes or files cannot be deleted. Release the lock 
setting. (l67, 72)
≥It may not be possible to delete scenes that are displayed as 
[ ] on the thumbnail display. If the scenes are unnecessary, 
format the HDD or card to erase the data. (l75) Please be 
aware that if the HDD or a card is formatted then all the data 
recorded on the HDD or the card will be erased.
≥If the SD card’s write protect switch is set to LOCK, then 
deletion is disabled. (l22)
The images on the SD 
card do not look normal.≥The data may be destroyed. It may have been destroyed by 
static or electromagnetic waves. Store important data on a 
computer or other products as well.
Even if HDD or a card is 
formatted, it cannot be 
used.≥Either this unit or the card may be damaged. Please consult a 
dealer. 
≥Use an SD card from 8 MB to 4 GB with this unit. (l21)
ProblemCheck points
LSQT1190(ENG).book  115 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							Others
11 6LSQT1190
The indication 
disappears.
The screen is frozen.
No operation can be 
performed.≥Is this unit connected to a computer?
#No operation can be performed on this unit when it is connected 
to a computer.
≥Turn off the power to this unit. If the power cannot be turned 
off, remove the SD card then press the RESET button, or 
remove the battery or AC adaptor and then reattach it. After 
that, turn on the power again. If normal operation is still not 
restored, detach the power connected, and consult the dealer 
who you purchased this unit from.
“PUSH THE RESET 
SWITCH.” is displayed.≥The unit has automatically detected an error. Remove the SD 
card then press the RESET button to restart the unit.
#(SDR-H200) Press the RESET button with the projecting part of 
the grip belt A.
#(SDR-H20/SDR-H18) Press the RESET button with the 
projecting part of the lens cap B.
≥If you do not press the RESET button, the power to this unit is 
turned off automatically about 1 minute later.
≥Even after you press the RESET button, the indication may still 
appear repeatedly. If so, this unit needs repair. Detach the 
power connected, and consult the dealer who you purchased 
this unit from. Do not attempt to repair the appliance by 
yourself.
If the SD card is inserted 
in this unit, it is not 
recognized.≥Is the SD card formatted on a computer inserted?
#Use this unit to format SD cards. Please be aware that if an SD 
card is formatted, then all the data recorded on the card will be 
erased. (l75)
If the SD card is inserted 
in another device, it is not 
recognized.≥Check that the device is compatible with the capacity or type of 
SD card (SD Memory Card/SDHC Memory Card) that you 
inserted.
#Refer to the operating instructions of the device for details.
ProblemCheck points
A
B
LSQT1190(ENG).book  116 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							Others
117LSQT1190
With a computer (Windows)
ProblemCheck points
Even if connected by the 
USB cable, this unit is not 
recognized by the 
computer.≥The USB function selection screen does not appear if the USB 
cable is connected while the menu screen is displayed.
#Close the menu screen before connecting the USB cable.
≥Select another USB terminal on the computer.
≥Check the operating environment. (l83)
≥Disconnect the USB cable, turn the unit off then on and then 
reconnect the USB cable.
An image that should 
have been recorded does 
not appear when 
ImageMixer3 is started.≥If there are multiple drives, a drive other than this unit may be 
selected.
#HDD: Select [SDR-H200], [SDR-H20] or [SDR-H18] from 
[Source].
SD card: Select [Removable Disk] from [Source].
When the USB cable is 
disconnected, an error 
message will appear on 
the computer.≥To disconnect the USB cable safely, double-click the
  icon 
in the task tray and follow the instructions on the screen.
The DVD COPY function 
will not start even when I 
press the DVD COPY 
button.≥To create DVD-Video discs using the DVD COPY function, you 
need to install ImageMixer3 for Panasonic from the supplied 
CD-ROM to your computer. (l85)
≥The DVD COPY function cannot be used in the video recording 
mode or picture recording mode.
#Rotate the mode dial to select   or  , then press the 
DVD COPY button.
I cannot copy images 
using the DVD COPY 
function.≥Have you already copied those images using the DVD COPY 
function?
#Once images have been copied using the DVD COPY function, 
they cannot be copied a second or subsequent time.
Import the images into ImageMixer3, and then write them on the 
DVD disc. (l91)
It takes a long time to 
create a DVD.≥Creating a DVD may take some time when the size of the 
motion picture files are small.
The amount of free space 
on the HDD or SD card 
does not increase even 
when the images are 
backed up on the 
computer or DVD discs.≥The unit’s image data is not automatically deleted even when 
you have imported images to your computer or onto DVD 
discs using ImageMixer3.
#To increase the amount of free space on the HDD or SD card, 
delete unnecessary images recorded on this unit. (l66, 71)
The DVD player cannot 
play back the discs I have 
created using 
ImageMixer3.≥To playback a DVD disc created using ImageMixer3, the player 
must support playback of that DVD disc. (Refer to the 
operating instructions of the player.)
The DVD-RAM disc 
cannot be recognized.≥If a DVD-RAM driver is installed in your computer, uninstall it.
LSQT1190(ENG).book  117 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							Others
11 8LSQT1190
With a computer (Macintosh)
ProblemCheck points
Even if connected by the 
USB cable, this unit is not 
recognized by the 
computer.≥The USB function selection screen does not appear if the USB 
cable is connected while the menu screen is displayed.
#Close the menu screen before connecting the USB cable.
≥Select another USB terminal on the computer.
≥Check the operating environment. (l94)
≥Disconnect the USB cable, turn the unit off then on and then 
reconnect the USB cable.
An image that should 
have been recorded does 
not appear when 
ImageMixer3 is started.≥If there are multiple drives, a drive other than this unit may be 
selected.
#HDD: Select [SDR-H200], [SDR-H20] or [SDR-H18] from 
[Source].
SD card: Select [Removable Disk] from [Source].
When the USB cable is 
disconnected, an error 
message will appear on 
the computer.≥When the drive icon is displayed on the desktop, drag the icon 
into the Trash and then disconnect the USB cable.
≥When the drive icon is not displayed on the desktop, exit the 
application and then disconnect the USB cable.
It takes a long time to 
create a DVD.≥Creating a DVD may take some time when the size of the 
motion picture files are small.
The amount of free space 
on the HDD or SD card 
does not increase even 
when the images are 
backed up on the 
computer or DVD discs.≥The unit’s image data is not automatically deleted even when 
you have imported images to your computer or onto DVD 
discs using ImageMixer3.
#To increase the amount of free space on the HDD or SD card, 
delete unnecessary images recorded on this unit. (l66, 71)
The DVD player cannot 
play back the discs I have 
created using 
ImageMixer3.≥In order to play back the DVD discs you have created using 
ImageMixer3, your player must be capable of playing the DVD 
discs. (Refer to the operating instructions of the player 
concerned.)
LSQT1190(ENG).book  118 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							119LSQT1190
Others
Cautions for use
≥The unit and card become warm after long 
operation, but this is not a malfunction.
Keep the SD Card/Hard Disk Video Camera as 
far away as possible from electromagnetic 
equipment (such as microwave ovens, TVs, 
video games etc.).
≥If you use the SD Card/Hard Disk Video 
Camera on top of or near a TV, the pictures 
and sound on the SD Card/Hard Disk Video 
Camera may be disrupted by electromagnetic 
wave radiation.
≥Do not use the SD Card/Hard Disk Video 
Camera near cell phones because doing so 
may result in noise adversely affecting the 
pictures and sound.
≥Recorded data may be damaged, or pictures 
may be distorted, by strong magnetic fields 
created by speakers or large motors.
≥Electromagnetic wave radiation generated by 
microprocessors may adversely affect the SD 
Card/Hard Disk Video Camera, disturbing the 
pictures and sound.
≥If the SD Card/Hard Disk Video Camera is 
adversely affected by electromagnetic 
equipment and stops functioning properly, turn 
the SD Card/Hard Disk Video Camera off and 
remove the battery or disconnect AC adaptor. 
Then reinsert the battery or reconnect AC 
adaptor and turn the SD Card/Hard Disk Video 
Camera on.
Do not use the SD Card/Hard Disk Video 
Camera near radio transmitters or high-
voltage lines.
≥If you record near radio transmitters or 
high-voltage lines, the recorded pictures and 
sound may be adversely affected.
Make sure to use the supplied cords and 
cables. If you use optional accessories, use 
the cords and the cables supplied with them.
Do not extend the cords and the cables.Do not spray insecticides or volatile 
chemicals onto the unit.
≥If the unit is sprayed with such chemicals, its 
body may be marred and the surface finish 
may peel off.
≥Do not leave rubber or plastic products in 
contact with the unit for a long time.
When you use the unit in a sandy or dusty 
place such as a beach, do not let sand or fine 
dust get into the body and terminals of the 
unit.
Also, keep the unit away from sea water.
≥Sand or dust may damage the unit. (Care 
should be taken when inserting and removing 
a card.)
≥If sea water splashes onto the unit, wipe off the 
water with a well wrung cloth. Then wipe the 
unit again with a dry cloth.
When carrying the unit, do not drop or bump 
it.
≥A strong impact can break the unit’s casing, 
causing it to malfunction.
Do not use benzine, paint thinner or alcohol 
for cleaning the unit.
≥Before cleaning, detach the battery or pull out 
the AC cable from the AC outlet.
≥The camera body may be discolored and the 
surface finish may peel off.
≥Wipe the unit with a soft dry cloth to remove 
dust and fingerprints. To remove stubborn 
stains, thoroughly wring a cloth that has been 
soaked in a neutral detergent diluted with 
water and wipe the unit with it. Afterwards, 
wipe it with a dry cloth.
≥When you use a chemical dust cloth, follow the 
instructions that came with the cloth.
Do not use the unit for surveillance purposes 
or other business uses.
≥If you use the unit for a long time, heat will 
build up inside it and this may cause a 
malfunction.
≥This unit is not intended for industrial use.
When you are not going to use the unit for an 
extended time
About this unit
LSQT1190(ENG).book  119 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							120LSQT1190
Others
≥When storing the unit in a cupboard or cabinet, 
it is recommended that you place a desiccant 
(silica gel) in with it.
The battery used in this unit is a rechargeable 
lithium-ion battery. It is susceptible to humidity 
and temperature and the effect increases the 
more the temperature rises or falls. In cold areas, 
the full charge indication may not appear or the 
low battery indication may appear for about 
5 minutes after starting use. At high 
temperatures, the protection function may be 
triggered, making it impossible to use the unit.
Be sure to detach the battery after use.
≥If the battery is left attached, a minute amount 
of current continues to flow even if the unit’s 
power is off. Keeping the unit in this state may 
result in over discharge of the battery. This 
may result in you not being able to use the 
battery even after it is charged.
≥The battery should be stored in the vinyl bag 
so metal does not come into contact with the 
terminals.
≥The battery should be stored in a cool place 
free from humidity, with as constant 
temperature as possible. (Recommended 
temperature: 15 °C to 25 °C (59 °F to 77 °F), 
Recommended humidity: 40% to 60%) 
≥Extremely high temperatures or low 
temperatures will shorten the life of the battery.
≥If the battery is kept in high-temperature, high-
humidity, or oily-smoky places, the terminals 
may rust and cause malfunctions.
≥To store the battery for a long period of time, 
we recommend you charge it once every year 
and store it again after you have completely 
used up the charged capacity. 
≥Dust and other matter attached to the battery 
terminals should be removed.
Prepare spare batteries when going out for 
recording.
≥Prepare batteries enough to last for 3 to 4 
times the period during you want to record 
pictures in. In cold places such as a ski resort, 
the period during which you can record 
pictures is shortened. ≥When you travel, do not forget to bring an AC 
adaptor so that you can recharge the batteries 
at your destination.
If you drop the battery accidentally, check to 
see if the terminals are damaged.
≥Attaching a battery with damaged terminals 
can damage the unit or AC adaptor.
Do not throw old battery into fire.
≥Heating a battery or throwing it into a fire may 
result in an explosion.
≥If the operating time is very short even after the 
battery has been recharged, the battery has 
worn out. Please purchase a new battery. 
≥If the battery is warm, charging requires more 
time than normal.
≥If the temperature of the battery is extremely 
high or extremely low, the CHARGE lamp may 
continue flashing, and the battery may not be 
charged. Wait until the appropriate 
temperature is restored before charging the 
battery again. If the battery still fails to charge, 
something may be wrong with the battery or 
AC adaptor. Contact your dealer.
≥If you use the AC adaptor near a radio, radio 
reception may be disturbed. Keep the AC 
adaptor 1 m (3.3 feet) or more away from the 
radio.
≥When using the AC adaptor, it may generate 
whirring sounds. However, this is normal.
≥After use, be sure to disconnect the AC 
adaptor. (If it is left connected, a minute 
amount of current is consumed.)
≥Always keep the electrodes of the AC adaptor 
and battery clean.
Put this unit near the outlet to make it easy 
for the interrupting device (plug) to reach it.
≥The memory capacity indicated on the label of 
an SD card is the total of the capacity for 
copyright protection and management and the 
capacity which can be used on the unit, a 
computer etc.
About the battery
About the AC adaptor
About the SD card
LSQT1190(ENG).book  120 ページ  ２００７年１月１３日　土曜日　午後３時３２分