Panasonic Sdr H20 Operating Instructions Manual

							Playback
61LSQT1190
≥When the amount of time recorded on the scene is short, playback may not be possible.
≥When a scene is displayed as [ ] on the thumbnail display, playback is not possible.
≥The power will not turn off when the LCD monitor is closed.
≥When playing back motion pictures recorded on an SD card with other products on this unit or playing 
back motion pictures recorded on an SD card with this unit on other products, the picture quality may 
deteriorate and they may be unplayable. (The message “CANNOT PLAY.” appears.)
≥The time displayed may be different from the recording time and it may take time to display the 
thumbnail display when playing back motion pictures recorded on an SD card with other products.
≥The recording time is not displayed on the screen during playback of scenes recorded on an SD card 
with other products.
Move and hold the joystick right during playback until 
fast-forward starts.
(Move and hold the joystick left to rewind.)
≥Move the joystick again to increase the speed.
≥Normal playback is restored when you move the joystick up.
∫Operating with the remote control (SDR-H200)
Press the 6
 or 5 button.
1Move the joystick up during playback to pause the playback.
2Move and hold the joystick right.
(Slow-motion pictures will be played back in 
reverse when you move and hold the joystick left.)
≥Normal playback is restored when you move the joystick up.
∫Operating with the remote control (SDR-H200)
Press the E
 or D button.
The motion picture is advanced one frame at a time.
Fast forward/rewind playback
Slow-motion playback
Frame-by-frame playback
PLAY
STOP SKIP SKIP
PA U S E
SEARCH
STILL ADV STILL ADVSEARCH
PLAY
STOP SKIP SKIP
PA U S E
SEARCH
STILL ADV STILL ADVSEARCH
LSQT1190(ENG).book  61 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							Playback
62LSQT1190
1Move the joystick up during playback to pause the playback.
2Move the joystick right. 
(The frames will be advanced one at a time in the 
reverse direction when you move the joystick left.)
≥Normal playback is restored when you move the joystick up.
∫Operating with the remote control (SDR-H200)
1 Press the ; button.
2 Press the E
 or D button.
Adjust the speaker volume during playback.
Move the volume lever to change the volume 
level.
≥The further the [ ] indicator moves to the right, the higher the 
volume level becomes.
≥When the adjustment is completed, the volume setting display will disappear.
Recorded scenes are grouped by date on this unit.
Scenes recorded on the same day can be played back in succession.
1Press the MENU button, then select 
[PLAY SETUP] # [PLAY MODE] # 
[BY DATE] and press the joystick.
The [VIEW BY DATE] screen is displayed by month 
when playing back motion pictures on the HDD. 
Proceed to step 3 when playing back an SD card.
To adjust the volume
To w a r d s  “r”:increases the volume
To w a r d s  “s”:decreases the volume
Playing back motion pictures by date
PLAY
STOP SKIP SKIP
PA U S E
SEARCH
STILL ADV STILL ADVSEARCH
PLAY
STOP SKIP SKIP
PA U S E
SEARCH
STILL ADV STILL ADVSEARCH
MENU
LSQT1190(ENG).book  62 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							Playback
63LSQT1190
≥When [PLAY MODE] is set to [VIEW ALL], all recorded motion pictures will be played back in 
succession.
2(When playing back motion pictures on the HDD only)
Move the joystick left or right to select the month.
3Move the joystick up or down to select the date for playback, then press 
the joystick.
The scenes recorded on the same day are displayed as thumbnails.
4Select the scene to be played back.
≥Even if scenes are recorded on the same day, they are grouped separately when the number of 
scenes exceeds 99.
Press the MENU button, then select 
[PLAY SETUP] # [RESUME PLAY] # 
[ON] and press the joystick.
If playback of a motion picture is stopped, [R] 
appears on the thumbnail view of the stopped 
scene.
≥The resume position on the HDD and the SD card 
is memorized.
≥If playback is stopped at any point during a motion picture while [RESUME PLAY] is set to [OFF], the 
next time the motion picture is played back, it will be from the beginning.
≥The resume position memorized is cleared if you operate the mode dial, etc. (The [RESUME PLAY] 
setting is kept.)
≥[RESUME PLAY] is set to [OFF] if an SD card with the write protection switch at the LOCK position is 
inserted. (l22)
Resuming the previous playback
MENU
LSQT1190(ENG).book  63 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							Playback
64LSQT1190
Still picture playback
[HDD] [SD]
Play back the still pictures recorded on the internal HDD or SD card. Use the menu to select the desired 
playback medium. (lbelow)
1Rotate the mode dial to 
select .
2Press the MENU button, then select [MEDIA SELECT] # [HDD] or [SD 
CARD] to select the desired medium and press the joystick.
The still pictures recorded on the selected medium are displayed as thumbnails.
3Select the file to be played back.
ASelected medium
BFile number
CScroll bar display
The selected file will be encircled by a yellow frame.
≥When 9 or more files have been recorded, the next (or previous) page 
is displayed by moving the joystick.
≥If you move and hold the joystick up or down, you can fast forward or 
fast rewind the pages. The screen will not change at this time, but the 
file numbers and scroll bar display will change. Release the joystick 
when you have arrived at the page with the file you want to display.
4Press the joystick.
The selected file is played back on the full screen.
The operation icon is automatically displayed on the screen.
5Move the joystick to operate.
∫About still picture compatibility
≥This unit is compliant with the unified standard DCF (Design rule for Camera File system) established 
by JEITA (Japan Electronics and Information Technology Industries Association). 1/;: Slide show (playback of the still pictures on the SD card in numerical order) start/pause.
E: Plays back the previous picture.
D: Plays back the next picture.
∫: Stops the playback and shows the thumbnails.
BA
C
LSQT1190(ENG).book  64 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							Playback
65LSQT1190
≥The file format supported by this unit is JPEG. (Not all JPEG formatted files will be played back.) 
≥If a non-standard file is played back, the folder/file number may not be displayed.
≥This unit may degrade or not play back data recorded or created on another product and another 
product may degrade or not play back data recorded on this unit.
≥Do not operate the mode dial during the slide show.
≥While this unit accesses the SD card (the access lamp is lit), do not remove the SD card.
≥It takes time to display the file depending on the number of pixels of the file.
≥When a file is displayed as [ ] on the thumbnail display, playback is not possible.
≥If you attempt to play back a file recorded in a different format or file data is defective, an error 
message may appear.
≥The time displayed may be different from the recording time and it may take time to display the 
thumbnail display when playing back still pictures recorded on an SD card with other products.
≥The power will not turn off when the LCD monitor is closed.
LSQT1190(ENG).book  65 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							66LSQT1190
Editing
Editing
Editing scenes
[HDD] [SD]
The deleted scenes cannot be restored.
¬Rotate the mode dial to select  .
¬Select [HDD] or [SD CARD] in [MEDIA 
SELECT].
1Press the   button during 
playback.
2When the confirmation message 
appears, select [YES], then press 
the joystick.
¬Rotate the mode dial to select  .
¬Select [HDD] or [SD CARD] in [MEDIA 
SELECT].
1Press the   button in the 
thumbnail display. 
2Select [ALL] or [SELECT] and 
press the joystick.
≥When [ALL] is selected, the following scenes 
will be deleted. Proceed to step 5.
jWhen [PLAY MODE] is set to [VIEW ALL]: 
All the scenes on the selected medium 
except the locked scenes
jWhen [PLAY MODE] is set to [BY DATE]: All 
the scenes selected by date except the 
locked scenes
3(Only when [SELECT] is selected in step 2)
Select the scene to be deleted, 
then press the joystick.
The selected scene is encircled by a red frame.
≥When the joystick is pressed again, the 
selected scene will be canceled.
≥Up to 50 scenes can be set in succession.
4(Only when [SELECT] is selected in step 2)
Press the   button.
5When the confirmation message 
appears, select [YES], then press 
the joystick.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
Deleting scenes
This is for deleting motion picture 
scenes.
Deleting scenes one at a time
Deleting multiple scenes from the 
thumbnail display
LSQT1190(ENG).book  66 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							67LSQT1190
Editing
To cancel deleting halfway
Press the MENU button.
≥Scenes are deleted from the last scene on the 
thumbnail display. The scenes that have 
already been deleted when the deletion is 
canceled cannot be restored.
To complete editing
Press the MENU button.
≥You can also delete scenes by pressing the 
MENU button, selecting [DELETE] and then 
selecting [ALL] or [SELECT].
≥In case of [ALL], the deletion may take time if 
there are many scenes.
≥Do not turn off this unit while deleting.
≥When you delete scenes, use a battery with 
sufficient battery power or use the AC adaptor.
≥Do not open the card slot cover while deleting 
scenes recorded on an SD card. The deletion 
will stop.
≥The locked scenes cannot be deleted.
[HDD] [SD]
Motion picture scenes can be locked so that they 
are not deleted by mistake. (However, please be 
aware that if a medium is formatted, then all the 
data on the medium will be erased.)
¬Rotate the mode dial to select  .
¬Select [HDD] or [SD CARD] in [MEDIA 
SELECT].
1Press the MENU button, then 
select [PLAY SETUP] # [LOCK SET] # [YES] and press the 
joystick.
2Select the scene to be protected, 
then press the joystick.
[ ] display appears and the selected scene is 
locked.
≥Press the joystick again to release the lock 
setting.
≥You can also select multiple scenes in 
succession.
To complete the settings
Press the MENU button.
Using playlists
You can create a playlist by gathering your 
favorites from the recorded scenes.
Since the playlist is not created by copying data, 
you will consume little of the capacity by making 
a playlist.
Locking motion picture 
scenes
This is for preventing motion picture 
scenes from being deleted by 
mistake.
What is a playlist?
MENU
LSQT1190(ENG).book  67 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							68LSQT1190
Editing
≥If you create or delete playlists, the original 
scenes will not be modified. Editing scenes on 
a playlist will not affect the original scenes.
ARecorded scenes
BPlaylist
≥You can create a playlist on the HDD only. You 
cannot create a playlist on an SD card.
≥The maximum number of items on the HDD
jPlaylists: 4
jPlaylist scenes: 99
≥If original scenes are deleted, the portion of 
playlists created with these scenes is also 
deleted.
[HDD]
¬Rotate the mode dial to select  .
¬Select [HDD] in [MEDIA SELECT].
1Press the MENU button, then 
select [PLAY SETUP] # [PLAYLIST] # [CREATE] and 
press the joystick.
2Select the scene to be added to 
the playlist, then press the 
joystick.
The selected scene is encircled by a red frame.
≥When the joystick is pressed again, the 
selected scene will be canceled.
≥Up to 50 scenes can be set in succession.
≥The scenes are registered in the playlist in the 
order that they were selected. After creating a 
playlist, the order of the scenes in it can be 
changed with the [MOVE] function. (l70)
3Press the MENU button.
4When the confirmation message 
appears, select [YES], then press 
the joystick.
The thumbnail view screen of the created playlist 
is displayed.
To add another scene to the same 
playlist
Select [ADD]. (l69)
To play back a playlist
Select the scene to start playback, then press the 
joystick.
Creating a new playlist
A
B
MENU
LSQT1190(ENG).book  68 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							69LSQT1190
Editing
[HDD]
¬Rotate the mode dial to select  .
¬Select [HDD] in [MEDIA SELECT].
1Press the MENU button, then 
select [PLAY SETUP] # 
[PLAYLIST] # [VIEW LIST] and 
press the joystick.
2Select the playlist to be played 
back, then press the joystick.
Scenes in the selected playlist are displayed as 
thumbnails.
3Select the scene to start 
playback, then press the joystick.
To select a different playlist
Press the MENU button, then select 
[PLAYLIST VIEW] and press the joystick.
To return to showing the original scenes
Press the MENU button, then select [END] and 
press the joystick.[HDD]
Editing scenes on a playlist will not affect the 
original scenes.
¬Select playlist playback mode. (l69, 
“Playing back a playlist”, steps 1 and 
2)
1Press the MENU button, then 
select [EDIT] # [ADD] # [YES] 
and press the joystick.
2Select the scene to be added, 
then press the joystick.
The selected scene is encircled by a red frame.
≥When the joystick is pressed again, the 
selected scene will be canceled.
≥Up to 50 scenes can be set in succession.
≥The scenes are added to the playlist in the 
order that they were selected. The order of the 
scenes in the playlist can be changed by 
[MOVE] function. (l70)
3Press the MENU button.
4When the confirmation message 
appears, select [YES], then press 
the joystick.
Playing back a playlist
MENU
Editing a playlist
Adding scenes to playlist
MENU
LSQT1190(ENG).book  69 ページ  ２００７年１月１３日　土曜日　午後３時３２分 
						

							70LSQT1190
Editing
The thumbnail view screen of the playlist that 
scenes were added to is displayed.
To continue adding scenes to the 
playlist
Repeat steps 1-4.
The scenes in a playlist can be moved.
¬Select playlist playback mode. (l69, 
“Playing back a playlist”, steps 1 and 
2)
1Press the MENU button, then 
select [EDIT] # [MOVE] # [YES] 
and press the joystick.
2Select the scene to be moved, 
then press the joystick.
The selected scene is encircled by a red frame, 
and the position to insert is shown by a yellow 
bar.
3Select the position to insert the 
scene, then press the joystick.
To continue moving other scenes in the 
playlist
Repeat steps 2-3.
To complete editing
Press the MENU button.
≥Deleting scenes on a playlist will not affect the 
original scenes.
∫Deleting scenes one at a time
¬Select playlist playback mode. (l69, 
“Playing back a playlist”, steps 1 and 
2)
1Press the   button during 
playback.
2When the confirmation message 
appears, select [YES], then press 
the joystick.
∫Deleting multiple scenes from 
the thumbnail display
¬Select playlist playback mode. (l69, 
“Playing back a playlist”, steps 1 and 
2)
1Press the   button in the 
thumbnail display. 
Moving scenes
MENU
Deleting scenes
LSQT1190(ENG).book  70 ページ  ２００７年１月１３日　土曜日　午後３時３２分