Panasonic SD Media Storage Sv Pt1 Operating Instructions

11
Before Use
Before Using
Copying and Backup
Copying: Memory Card -> PC Card HDD
When copying from a Memory Card to the PC Card HDD, create a folder entitled
“CARD****” for each copy and save Memory Card data into this folder. When BACKUP
is ON, the “CARD****” folder mentioned above is created in the “BACKUP” folder of
the PC Card HDD, and Memory Card data is copied into this folder. Thus, normal PC
Card HDD available space is reduced by half. See page 20 on how to turn the
BACKUP function ON and OFF....

12
Copying: PC Card HDD -> Memory Card
The folder entitled “CARD****” will disappear and data will be copied according to the file
structure rules.
Before Using
Memory CardPC Card HDD
ROOT
MISC
DCIM
ROOT
PHOTO
ROOT
MISC
DCIM
AAA. JPG
BBB. TXT
CCC. EXE ROOT
MISC
DCIM CARDA001
CARDA002
PHOTO
CARDA003
MISC
DCIM
AAA. JPG
BBB. TXT
CCC. EXE
BACKUP
CARDA001
CARDA002
CARDA003
Data files will not
be copied.
BACKUP folder contents,
not displayable in TV mode,
can be copied/edited/
deleted on a computer.
Secure...

13
Before Use
Selecting Modes
Copy Mode (pp. 19~23)
Copy mode is used to copy data from the inserted card to another card. In addition,
you can press MENU to carry out operations such as checking the card storage
capacity, making backup and TV format settings and formatting cards.
Memory Card PC Card HDD
(Or other card)
TV Mode (pp. 24~41)
In TV mode, you can connect the unit to a TV and then carry out playback and edit
operations (such as copying, deleting, protecting, zooming, rotating and enhancing...

14
Index Of Controls
Front View
SD
HDD
USB
S/V OUT   DC IN
COPY   TV
MODE
BATTERY OPEN
OFF   ON
HDD SAFETY
Hand Strap
Attachment Pin
Attach hand strap here.
(p. 15)
POWER LampLights when power is
ON. Flashes during
battery recharge.
SD LampLights when SD Memory
Card or MultiMediaCard
is accessed.
HDD LampLights when PC Card
HDD or PC Card is
accessed.
CANCEL ButtonCancels Slide Show and
presentations.
Liquid Crystal DisplayThe LCD indicates the current operating (TV, Copy) mode.
In Copy mode, displays...

15
Before Use
Carrying the Unit
1Insert strap end loop into gap of
Attachment Pin.
2Thread opposite end through the
end loop and pull strap tight in
the direction of arrow.
This unit is a precision device. When carrying this unit, ensure that it does not swing
excessively. Do not drop this unit or subject it to strong impacts.
1Open the carrying case.
2Insert this unit into the lower
compar tment.
3Insert the PC Card HDD case into
the upper compar tment with the
“PC Card HDD” mark facing
upward.
4Close...

16
Recharging the Battery Pack
The batter y pack can be recharged right inside this unit using the supplied AC
adaptor. Unit power must be turned OFF before recharging. Charging will stop if
unit power is turned on.
1Slide the battery
cover slightly to the
right and swing open.
2Insert the battery
(labeled side up) all the
way into the battery
compartment.
3Close the cover.
4Connect the DC plug
of the AC adaptor to
unit’s DC IN terminal,
then the AC adaptor
into a wall outlet.
The POWER Lamp
flashes...

17
Before Use
Inserting the Card
SD Memory Card Slot
1Push up slightly on card
door to swing open.
2Insert the Memory Card
(labeled side up, cropped
corner right) and hold in
place until you hear a click.
3Close the lid.
To remove Card :
Open card door.
Press in lightly on
card then release.
cropped corner
PC Card Slot
1Slide the lever to open the
cover.
2Insert the PC Card HDD or
PC Card all the way into
the slot.
3Close the cover.
To remove Card :
Press EJECT TAB
twice.
Always insert card in the...

18
Turning the Power On
1Insert the battery and connect the AC adaptor. (p. 16)The unit can be operated using only the batter y, but when using PC mode, the AC
adaptor must be connected, otherwise the unit will not turn on.
2Place unit on a flat, level surface.If this is not done, the HDD SAFETY Switch may prevent the unit from operating.
(See below.)
3Press STANDBY for approx. 2 seconds.The power comes on (POWER Lamp lights) and the
unit cycles through each operating mode in sequence.
(p. 13)To turn...

19
Copy Mode
Copy Mode (Display Indicator)
Liquid Crystal
Display
– Note –Any cards that utilize adaptors other than the accessory PC Card HDD adaptor are displayed
as “PC CARD”.
M
CANCEL
ENU
/SET
Displaying Menu (Indicator Flowchart)
MENU
STANDBY/SETCOPY  T
V
MODE
COPY/TV
MODE
1Set COPY/TV MODE to “COPY”.
2Insert a Card. (p. 17)
3Turn on this unit. (p. 18)
In Copy mode, data can be copied from one
card to another. You can also check card
storage capacity, make backups, set TV
formats, and format...

20
Copy Mode (Menus)
Liquid Crystal
Display
M
CANCEL
ENU
/SET
MENU
CANCEL
STANDBY/
SETCOPY  T
V
MODE
COPY/TV MODE
PC Card HDD
(PC Card) Slot
Memory Card Slot
Card Storage Capacity Check (MEDIA CAPACITY)
This lets you confirm card storage capacity.
PC Card HDD available space is approx. 4.6 GB.
BACKUP (BACKUP ON/OFF)Set to ON, a backup folder containing your data is automatically created when copying. Useful
where data may become accidentally deleted or corrupt. Backup folder contents are not...