Panasonic SD Media Storage Sv Pt1 Operating Instructions

41
TV Mode
TV Mode (Full Screen Playback)
1Press  to select “COLOR
EFFECT” from the sub menu, then
press SET. (p. 39)
2Press  to select “B/W” or
“SEPIA”, then press SET.
The image color will change.
Selecting “RETURN”, then pressing SET
restores image’s original coloration.
Processing Image Color (COLOR EFFECT)
1Press  to select “PROPERTIES”
from the sub menu then press SET.
(p. 39)
When a single image is displayed in a full
screen, the image information will remain
constantly displayed.
Once this...

42
PC Mode (Setup)
By connecting this unit to a PC via the supplied USB cable, it can be utilized as an
external drive.
System Requirements
System requirements are shown below.
Compatible PC Models
OS Compatibility PC / AT compatible (PCs with USB port)
Windows® 98SEWindows® 2000Windows® MeWindows® XP
PC must come factory equipped with a USB port and preinstalled with one of the OS
listed above.
For Windows 98SE, a CD-ROM drive is required to install the driver.
If more than one USB device is...

43
PC Mode
PC Mode (USB Driver)
Installing the USB Driver
1Make connections following “Setup
(Connections)” steps on page 42.
The “Add New Hardware Wizard” screen is
displayed.
2Insert the supplied CD-ROM into the
PC’s CD-ROM drive.
3In the “This wizard searches for new
drivers for:” dialog box, click on
[Next].
4With “Search for the best drive for your
device. [Recommended]” checked, click
on      [Next].
5With “CD-ROM drive” checked, click on
      [Next].
Uncheck the [Floppy disk drives] box.
6In...

44
PC Mode (Operation with the PC)
M
CANCEL
ENU
/SETSET
1Make connections following “Setup (Connections)” steps on page 42.
2Select and change to another card.
With a USB cable connected, selecting another card will terminate
communication with the PC. Do Steps 1~4 of “Disconnecting Unit from PC” on
page 45, then proceed with the following operation.
Press 
 to select “SD” or “HDD (PC Card)”,
then press SET.
While the SD or HDD lamp is flashing, “CANNOT
CHANGE SLOT” is displayed and operation is not...

45
PC Mode
PC Mode (Operation with the PC)
1Confirm SD and HDD Lamps are out and card is not being accessed.
2Click on  [Safety Remove Hardware] icon in the desktop task tray.
3Select [USB Mass Storage Device] and click [Stop].For Windows Me, “Unplug or eject hardware” will be displayed.
The message “Stop a Hardware device” will be displayed.
If this unit is disconnected from the PC while an application is running, an error message
may appear. In this case, close the application, then disconnect the...

46
PC Mode (Using the Applications)
The included CD-ROM contains a “JPEG Addin Software” application which converts
Microsoft PowerPoint data created on a PC into JPEG files and creates a
presentation folder (p. 47) for TV screen presentation (pp. 32, 33).
Recommended for use with a 300 MHz or higher CPU (or equivalent CPU) and at least 128 MB of
memory. Also, Microsoft® PowerPoint® 97/2000/2002 must be installed prior to use.
1Turn on the PC and start Windows.
2Load included CD-ROM into PC CD-ROM...

47
PC Mode
1Install JPEG Addin Software (p. 46), then start PowerPoint on the PC.
2Select [Open] from [File] menu to open a PowerPoint file for JPEG
conversion.
3Connect PC using supplied USB cable. (p. 42)
4Click        in the upper, left corner. (p. 46)If “Drive not found.” appears, click [OK].
5Select “Removable Disk” as the save
destination.
Select “SD” or “HDD (PC Card)” as the save
destination, then specify the drive to be recognized
as the removable disk drive corresponding to the
connected...

48
PC Mode (Other)
1Click “Start”, “Settings”, and “Control Panel”.For Windows XP, Click “Star t” and  “Control Panel”.
2Double-click “Add/Remove Programs”.For Windows XP, click “Add or Remove Programs”.
A list of the programs that are currently installed will be displayed.
3Select “JPEG Addin Software”, then click [Add/Remove].For Windows Me/XP, click [Change/Remove].
4Click on [OK].The JPEG Addin Software will then be uninstalled.
To cancel, click [Cancel].
Uninstalling JPEG Addin Software
For...

49
PC Mode
PC Mode (Other)
HDD SAFETY Switch Operation
When using a USB connection, place the unit device on a flat, level surface. If the
HDD SAFETY switch is activated, carry out the following remedies.

 

 


 For Windows  98SE/Me
If the HDD SAFETY Detection Switch is activated while a PC Card HDD is being
accessed, the PC screen goes blue and the following message appears.
a“SAFETY MODE PUT IT DOWN” appears on the unit LCD. Make sure that the
unit is always placed on a flat, level surface.
bWhen the...

50
Warning and Instruction Displays
Indications Condition
Copy Mode (Liquid Crystal Display)
Insert battery. Power will not turn on without battery
inserted.
Insert the card.
No data is stored on the card.
An error has occurred during initialization of the
HDD/PC Card. Turn off the power, then reinsert the
card. If error occurs again, format the card (p. 23),
then reinsert it. If error still occurs, card may be
damaged.
An error occurred during card formatting.
Re-insert card and format again. (pp. 22,...