Panasonic Sc Pt560ee S Operating Instructions

							[_E_]RQTX0098-1R
Operating Instructions
Instrukcja obsługi
Návod k obsluze
DVD Home Theater Sound System
Zestaw kina domowego z odtwarzaczem DVD
Systém zvuku domácího kina s DVD pâehrávaçem
Model No.SC-PT560
SC-PT860
The illustrations shown may differ from your unit.
Urzdązenie pokazane na ilustracjach może się różnić od zakupionego 
urządzenia.
Uvedené ilustrace se mohou od vašeho přístroje lišit.
Region number/Numer regionu/Číslo regionu
The player plays DVD-Video marked with labels containing the region 
number “2” or “ALL”.
Odtwarzacz obsługuje płyty DVD-Video z numerami regionów „2“ lub 
„ALL“.
Přehrávač přehrává disky DVD-Video označené štítky s číslem 
regionu „2“ nebo „ALL“.
Example/Przykład/Příklad: 
2ALL3
5 2
VIERA Link compatibleEnjoy high-quality picture and linked operations with 
your VIERA TV.
Kompatybilny z systemem VIERA 
Link
Ciesz się wysoką jakością obrazu i możliwością 
przeprowadzania operacji wspólnych z telewizorem 
VIERA.
Kompatibilní s funkcí VIERA LinkVychutnejte si kvalitní obraz a využijte propojené 
ovládání s televizorem VIERA.
26
Sound enhancement optionsSurround Enhancer, Dolby Pro LogicII, and more.
Opcje uwydatniania dźwiękuWzmacniacz dźwięku przestrzennego, Dolby Pro 
LogicII i wiele innych.
Možnosti vylepšení zvukuVylepšení okolí, Dolby Pro LogicII a další.
28
iPod connectivityEnjoy iPod music through the speakers, view iPod 
photos or videos on the TV.
Możliwość podłączenia 
odtwarzacza iPod
Monaż odtwarzać muzykę z odtwarzacza iPod 
korzystając z głośników, oglądać zdjęcia lub wideoklipy 
zapisane w pamięci odtwarzacza iPod na ekranie 
telewizora.
Připojení přehrávače iPodPoslechněte si hudbu z přehrávače iPod přes 
reproduktory a prohlédněte si fotografie a videa z 
přehrávače iPod na televizoru.
31
The illustration shows SC-PT560.
Na rysunku przedstawiono model SC-PT560.
Obrázek představuje model SC-PT560.
SC-PT560_860E-RQTX0098-R_eng.book  Page 1  Tuesday, December 4, 2007  9:02 AM
 
						

							RQTX0098
2
Accessories
ENGLISH
Dear customer
Thank you for purchasing this product. For optimum performance and 
safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read 
the instructions completely.
Please keep this manual for future reference.Indicates features applicable to:
Please check and identify the supplied accessories.
Operations in these instructions are described mainly with the 
remote control, but you can perform the operations on the main 
unit if the controls are the same.[PT560] : SC-PT560 only[PT860] : SC-PT860 only
SystemSC-PT560SC-PT860
Main unitSA-PT560 SA-PT860
Front speakersSB-HF560 SB-HF560
Center speakerSB-HC560 SB-HC560
Surround speakersSB-HS560 SB-HS860
SubwooferSB-HW560 SB-HW860
CAUTION!THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF 
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY 
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. 
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK 
OR PRODUCT DAMAGE,
≥DO NOT EXPOSE THIS APPARATUS TO RAIN, 
MOISTURE, DRIPPING OR SPLASHING AND THAT 
NO OBJECTS FILLED WITH LIQUIDS, SUCH AS 
VASES, SHALL BE PLACED ON THE APPARATUS.
≥USE ONLY THE RECOMMENDED ACCESSORIES.
≥DO NOT REMOVE THE COVER (OR BACK); THERE 
ARE NO USER SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!≥DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, 
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. 
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK 
OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO 
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER 
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
≥DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS 
WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND 
SIMILAR ITEMS.
≥DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS 
LIGHTED CANDLES, ON THE UNIT.
≥DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY 
FRIENDLY MANNER.
This product may receive radio interference caused by mobile 
telephones during use. If such interference is apparent, please 
increase separation between the product and the mobile telephone.
The socket outlet shall be installed near the equipment and easily 
accessible. 
The mains plug of the power supply cord shall remain readily 
operable.
To completely disconnect this apparatus from the AC Mains, 
disconnect the power supply cord plug from AC receptacle.
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
(Side of product)
(Inside of product)
(Tuotteen sisällä)
(Produktets innside)
Accessories
∏1 Remote control
[PT560] (N2QAYB000207)
[PT860] (N2QAYB000215)∏Speaker cables
1kshort cable (for center
speaker)
[PT560] 2klong cables (for surround
speakers)∏[PT560] 8 Screws
[PT860] 16 Screws 
∏2 Remote control batteries∏[PT860] 1 Auto speaker 
setup microphone
∏1 FM indoor antenna ∏[PT560] 2 Stands 
[PT860] 4 Stands ∏1 Sheet of speaker cable 
stickers
∏1 AC mains lead∏[PT560] 2 Bases 
[PT860] 4 Bases 
2
SC-PT560_860E-RQTX0098-R_eng.book  Page 2  Tuesday, December 4, 2007  9:02 AM
 
						

							ENGLISH RQTX0098
3 Reference
TABLE OF CONTENTS
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
Simple Setup
step 1 Assembling the speakers . . . . . . . . . .  4
step 2 Positioning . . . . . . . . . . . . . . . . . . . . . .  5
Speaker installation options . . . . . . . . . . . . .  6
step 3 Cable connections. . . . . . . . . . . . . . . .  7
Speaker connections . . . . . . . . . . . . . . . . . .  7
Radio antenna connections . . . . . . . . . . . . .  7
Audio and video connections . . . . . . . . . . . .  8
step 4 AC mains lead connection . . . . . . . . .  9
step 5 Preparing the remote control . . . . . . .  9
step 6 Performing QUICK SETUP  . . . . . . . .  10
step 7 Presetting the radio stations  . . . . . .  11
Presetting stations automatically . . . . . . . . .11
Confirming the preset channels. . . . . . . . . .11
Control reference guide  . . . . . . . . . . . . . . . . .  12
Utilising the START menu  . . . . . . . . . . . . . . .  13
Basic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14
Using the main unit  . . . . . . . . . . . . . . . . . . . . . . . . . . .  14
Using the remote control . . . . . . . . . . . . . . . . . . . . . . .  15
Other playback functions . . . . . . . . . . . . . . . .  16
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16
Program and Random play . . . . . . . . . . . . . . . . . . . . .  16
Using navigation menus . . . . . . . . . . . . . . . . .  17
Playing data discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Playing RAM and DVD-R / -RW (DVD-VR) discs  . . . . .17
Using on-screen menus  . . . . . . . . . . . . . . . . .  18
About DivX VOD contents  . . . . . . . . . . . . . . .  20
Changing the player settings . . . . . . . . . . . . .  21
Selecting the delay time of the speakers  . . . . . . . . . . .24
Enjoying the FM radio . . . . . . . . . . . . . . . . . . .  25
Manual tuning  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  25
RDS broadcasting . . . . . . . . . . . . . . . . . . . . . . . . . . . .  25
Using the VIERA Link “HDAVI ControlTM” . . .  26
One touch play  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26
Auto input switching. . . . . . . . . . . . . . . . . . . . . . . . . . .  26
Power off link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26
Speaker control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  27
VIERA Link Control only with TV’s remote control 
[for “HDAVI Control 2 (or later)”] . . . . . . . . . . . . . . . .  27
Using sound effects  . . . . . . . . . . . . . . . . . . . .  28
Setting the sound effects  . . . . . . . . . . . . . . . . . . . . . . .28
Using Dolby Pro LogicII. . . . . . . . . . . . . . . . . . . . . . . .28
Using Whisper-mode Surround  . . . . . . . . . . . . . . . . . .28
Adjusting the subwoofer level . . . . . . . . . . . . . . . . . . . .29
Using Subwoofer Boost  . . . . . . . . . . . . . . . . . . . . . . . .29
Adjusting the speaker level . . . . . . . . . . . . . . . . . . . . . .29
Adjusting the Speaker output level automatically: 
Auto speaker setup  . . . . . . . . . . . . . . . . . . . . . . . . . .29
Operating other equipment  . . . . . . . . . . . . . .  30
Enjoying TV audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Enjoying digital audio  . . . . . . . . . . . . . . . . . . . . . . . . . .30
Playing from an USB device . . . . . . . . . . . . . . . . . . . . .30
Using the iPod  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Discs that can be played. . . . . . . . . . . . . . . . .  32
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . .  33
Troubleshooting guide . . . . . . . . . . . . . . . . . .  34Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  37
Specifications  . . . . . . . . . . . . . . . . . . . . . . . . .  38
Safety precautions  . . . . . . . . . . . . . . . . . . . . .  39
Getting 
Started
Playing 
Discs
Other 
Operations
3
Surround 
Sound
28
TV Audio
30
SC-PT560_860E-RQTX0098-R_eng.book  Page 3  Tuesday, December 4, 2007  9:02 AM
 
						

							4
Simple Setup
Assembling the speakers
RQTX0098 ENGLISH
[PT560]Front speakers
[PT860]Front speakers and surround speakers
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥For assembly, use a Phillips-head screwdriver.
≥For optional wall mount, refer to page 6.
∫Preventing the speakers from falling
≥You will need to obtain the appropriate screw eyes to match the 
walls or pillars to which they are going to be fastened.
≥Consult a qualified housing contractor concerning the 
appropriate procedure when attaching to a concrete wall or a 
surface that may not have strong enough support. Improper 
attachment may result in damage to the wall or speakers.
Speaker assembly option
step
1Assembling the speakers
Make sure you have all the indicated components before starting assembly, setup, and connection.
[PT560]2 Front speakers
[PT860]2 Front speakers and
2 Surround speakers[PT560]2 Stands (with cable)
[PT860]4 Stands
≥2
kstands with short cable: For front 
speakers
≥2
kstands with long cable: For surround 
speakers[PT560]2 Bases
[PT860]4 Bases[PT560]8 screws
[PT860]16 screws
Tighten securely.Slide into the groove.
Position the 
cable between 
the ridges.
Tighten securely.Press into the groove.Insert the wire fully.
i: White
j: Blue
Push!
Leave about 90 mm
Leave about 100 mm
You can remove and use the cable from 
the stand. To reattach the cable, refer to 
page 6.Insert the wire fully.
i: White
j: Blue
Push!
Tighten securely.Press into the groove. Thread the speaker cable through 
the base.Attach the speaker.
String (not included)
Thread from the wall to the speaker and tie tightly.
Rear of the speakerWallApprox. 
150 mm
Screw eye
(not included)
4
SC-PT560_860E-RQTX0098-R_eng.book  Page 4  Tuesday, December 4, 2007  9:02 AM
 
						

							5
Simple Setup
Positioning
ENGLISH RQTX0098
How you set up your speakers can affect the bass and the sound field. 
Note the following points:
≥Place speakers on flat secure bases.
≥Placing speakers too close to floors, walls, and corners can result in 
excessive bass. Cover walls and windows with thick curtains.
[Note]
Keep your speakers at least 10 mm away from the system for proper 
ventilation.Setup example
Place the front, center, and surround speakers at approximately the 
same distance from the seating position. Using “Auto speaker setup” 
(
➜29) is a convenient way to get the ideal surround sound from your 
speakers when you are unable to place them. The angles in the diagram 
are approximate.
Notes on speaker use
≥Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be 
negatively affected.
≥You can damage your speakers and shorten their useful life if you play 
sound at high levels over extended periods.
≥Reduce the volume in the following cases to avoid damage:
– When playing distorted sound.
– When the speakers are reverberating due to a record player, noise 
from FM broadcasts, or continuous signals from an oscillator, test 
disc, or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
If irregular colouring occurs on your TVThe center speaker is designed to be used close to a TV, but the picture 
may be affected with some TVs and setup combinations.
If this occurs, turn the TV off for about 30 minutes.
The demagnetising function of the TV should correct the problem. If it 
persists, move the speakers further away from the TV.
≥Remove the digital transmitter cover before installing any optional 
Panasonic wireless accessory.
≥Replace the cover when the digital transmitter is not in use.
(Continued on next page)
step
2Positioning
120°
60°
Front speakers
To allow for proper ventilation and to maintain 
good airflow around the main unit, position it with 
at least 5 cm of space on all sides.Put on a rack or shelf. Vibration caused by the 
speaker can disrupt the picture if it is placed 
directly on the TV. 
Place to the right or left of the 
TV, on the floor or a sturdy 
shelf so that it will not cause 
vibration. Leave about 30 cm 
from the TV.Center speaker
Main unit Subwoofer
Surround speakers
e.g. [PT560]
Set your surround free!
Optional Panasonic wireless 
accessory (example: SH-FX67)
You can enjoy surround speaker sound wirelessly when you use 
the optional Panasonic wireless accessory (example: SH-FX67).
For details, please refer to the operating instructions for the 
optional Panasonic wireless accessory.
OPTICAL
IN
AVTRANSMITTERDIGITALPUSHPUSH
PUSHPUSH
Push! Digital transmitter 
cover Back of the 
main unit
Push!
You can use the blunt end of a writing instrument to 
push here until the cover pops out.
5
SC-PT560_860E-RQTX0098-R_eng.book  Page 5  Tuesday, December 4, 2007  9:02 AM
 
						

							6
Simple Setup
Positioning
RQTX0098 ENGLISH
Caution≥Do not touch the front netted area of the speakers. Hold by the sides.
e.g. Center speaker
≥Do not stand on the base. 
Be cautious when children 
are near.
∫Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
≥The wall or pillar on which the speakers are to be attached 
should be capable of supporting 10 kg per screw. Consult a 
qualified building contractor when attaching the speakers to a 
wall. Improper attachment may result in damage to the wall and 
speakers.
1Drive a screw (not included) into the wall. 
2Fit the speaker securely onto the screw(s) with the hole(s).∫Fitting speaker stands (not included)
[PT560] Center and surround speakers only
[PT860] Center speaker only
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance 
between screws as shown in the diagram.
≥The stands must be able to support over 10 kg.
≥The stands must be stable even if the speakers are in a high 
position.
e.g. Center speaker
∫Reattaching the speaker cable
Caution≥The main unit and supplied speakers are to be used only as 
indicated in this setup. Failure to do so may lead to damage to 
the amplifier and/or the speakers, and may result in the risk of 
fire. Consult a qualified service person if damage has occurred 
or if you experience a sudden change in performance.
≥Do not attempt to attach these speakers to walls using 
methods other than those described in this manual.
DO DO
NOT
DO
NOT
e.g. Front speaker
Speaker installation options
‰7.0 mm t o  9.4 mm
4 . 0 m m  t o  6.0 mm
Wall or pillar‰4.0 mmAt least 30 mm 
Center speaker
190 mm
[PT560] Surround speaker
In this position, 
the speaker will 
likely fall if moved 
to the left or right.Move the speaker 
so that the screw 
is in this position. e.g.
DO DO
NOT
[PT560] Front speaker
[PT860] Front and surround speakers Attach to a wall without the base and 
the stand
384 mm
116 mm
Speaker stand 
(not included) Plate thickness plus 
7.0 mm to 10 mm 5.0 mm, pitch 0.8 mm Metal screw holes
For attaching to 
speaker stands
60 mm 
Insert the cable from 
the bottom.
Pull out the cable 
through the hole. Leave about 
80 mm
6
SC-PT560_860E-RQTX0098-R_eng.book  Page 6  Tuesday, December 4, 2007  9:02 AM
 
						

							7
Simple Setup
Cable connections
ENGLISH RQTX0098
Turn off all equipment before connection and read the appropriate operating instructions.Do not connect the AC mains lead until all other connections are complete.
(Continued on next page)
1Speaker connections
2Radio antenna connections
Using an FM outdoor antenna (optional)
step
3Cable connections
CENTER SUBWOOFER FRONT652143LRLRSURROUND
SPEAKERS
FM ANT
(75   )
12
Main unit
LchSURROUND3
CENTER SUBWOOFER FRONT652143LRLRSURROUND
Connecting the speakers to the main unit:
Connect to terminals of the same colour.
Speaker Terminal/connector colour
1FRONT (L) White
2FRONT (R) Red
3SURROUND (L) Blue
4SURROUND (R) Grey
5CENTER Green
6SUBWOOFER PurpleInsert the wire fully.
i: White
j: Blue
Push!
e.g. [PT560]
Surround 
speaker (L)
Speaker cable sticker (included)
Attach the speaker-cable stickers to make 
connection easier. ≥Be careful not to cross (short circuit) or reverse 
the polarity of the speaker wires as doing so 
may damage the speakers.
DO
NOT
Main unitInsert fully.
FM ANT
(75   )
Adhesive tapeFM indoor antenna
(included)
Affix this end of the antenna where 
reception is best.
Main unit
FM ANT
(75   )
FM outdoor antenna
[Using a TV antenna (not included)]
≥The antenna should be installed by a 
competent technician.
75≠ coaxial cable
(not included) Use outdoor antenna if radio reception is poor.
≥Disconnect the antenna when the unit is not in use.
≥Do not use the outdoor antenna during an electrical storm.
Main unit
7
SC-PT560_860E-RQTX0098-R_eng.book  Page 7  Tuesday, December 4, 2007  9:02 AM
 
						

							8
Simple Setup
Cable connections
RQTX0098 ENGLISH
Basic setup example
[Note]
≥Do not make the video connections through the video cassette recorder.
Due to copy guard protection, the picture may not be displayed properly.
≥Only one video connection is required. Choose one of the video connections above depending on your TV.
3Audio and video connections
Other video connections for improved picture quality
TV terminalCable required
(not included)Main unit terminal Features
HDMI cable
[Note]≥Non-HDMI-compliant cables 
cannot be utilized.
≥It is recommended that you use 
Panasonic’s HDMI cable. 
Recommended part number: 
RP-CDHG15 (1.5 m), 
RP-CDHG30 (3.0 m), 
RP-CDHG50 (5.0 m), etc.
[\\\\\\\\\\\HDMI\\\\\\\\\\\]This connection provides the best picture quality.
≥
Set “VIDEO PRIORITY” to “ON” (➜23, “HDMI” menu).≥Set “VIDEO FORMAT” in Menu 4 (HDMI) (➜19).
VIERA Link “HDAVI Control”
If your Panasonic TV is VIERA Link compatible, you can 
operate it synchronising with home theater operations 
or vice versa (➜26, Using the VIERA Link “HDAVI 
Control
TM”).
≥Make the extra audio connection (➜9) when you use 
VIERA Link “HDAVI Control” function.
Panasonic televisions 
with 576/50i·50p, 480/
60i·60p input terminals 
are progressive 
compatible. Consult the 
manufacturer if you have 
another brand of 
television.Video cables
[COMPONENT_VIDEO_OUT]
≥Connect to terminals 
of the same colour.This connection provides a much purer picture than the 
SCART (AV) terminal.
≥When making this connection, select “VIDEO/YPbPr” 
or “S-VIDEO/YPbPr” in “VIDEO OUT – SCART” in 
“VIDEO” menu. If “RGB 1/NO OUTPUT” or 
“RGB 2/NO OUTPUT” is selected, no signal is output 
from the component video terminals. (➜22)
To enjoy progressive video
≥Connect to a progressive output compatible 
television.
– Set “VIDEO OUT (I/P)” in “VIDEO” menu to 
“PROGRESSIVE” and then follow the instructions 
on the menu screen (➜22, “VIDEO” menu).
step
3Cable connections
OPTICAL
IN
LRPBYAUXCOMPONENT VIDEO OUT
RP
AV
3Main unit
AV 1
AV 2
AV  O U T
AV
VOLUMEMain unit
§This connection will also enable you to play TV audio through your 
home theater system (➜30, Enjoying TV audio). Select the 
appropriate audio out (e.g. Monitor) on the TV.
To improve picture quality, you can change the video signal output from 
the SCART (AV) terminal to suit the type of TV you are using. 
≥Select “S-VIDEO/YPbPr”, “RGB 1/NO OUTPUT” or 
“RGB 2/NO OUTPUT” from “VIDEO OUT – SCART” in “VIDEO” menu 
(➜22).
≥When both the HDMI cable and scart cable are connected, there will 
be no RGB output from the SCART (AV) terminal. TV (not included)
Scart cable
§
(not included)
Set top box or video cassette recorder
(not included) Scart cable 
(not included)
AV IN
COMPONENT
VIDEO IN
PB
PR
YCOMPONENT VIDEO OUTPB
PR
Y
8
SC-PT560_860E-RQTX0098-R_eng.book  Page 8  Tuesday, December 4, 2007  9:02 AM
 
						

							9
Simple Setup
Cable connections / AC mains lead connection / Preparing the remote control
9
ENGLISH RQTX0098
Conserving power
The main unit consumes a small amount of power, even when it is in 
standby mode (approx. 0.4 W). To save power when the unit is not to be 
used for a long time, unplug it from the household AC mains socket.
You will need to reset some memory items after plugging in the main 
unit.[Note]
The included AC mains lead is for use with the main unit only. Do not use 
it with other equipment. Also, do not use cords for other equipment with 
the main unit.
∫Batteries
≥Do not use rechargeable type batteries.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to direct 
sunlight for a long period of time with doors and windows closed.
Do not:≥mix old and new batteries.
≥use different types at the same time.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can 
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a 
long period of time. Store in a cool, dark place.
∫Use
Aim at the remote control signal sensor (➜13), avoiding obstacles, 
at a maximum range of 7 m directly in front of the unit.
Other audio connections
TV or external 
equipment terminalCable required
(not included)Main unit terminal Features
Optical digital audio cable
≥Do not bend sharply when 
connecting.[\\\\\\OPTICAL\IN\\\\\\]This unit can decode the surround signals received 
through the set top box, digital broadcasting or satellite 
broadcasts. Refer to your equipment’s operating 
instructions for details. Only Dolby Digital and PCM can 
be played with this connection.
≥After making this connection, make settings to suit the 
type of audio from your digital equipment
 (➜30).
Audio cable[\\\\\\\\\\\AUX\\\\\\\\\\\]This connection enables you to play audio from your 
TV, set top box or video cassette recorder through your 
home theater system (➜30, Enjoying TV audio).
OPTICAL OUTOPTICAL 
IN
AUDIO
OUT
L
RL
R
AUX
step
4AC mains lead connection
AC  IN
To household mains socket
AC mains lead (included)Main unit
step
5Preparing the remote control
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only 
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
R6/LR6, AA


Insert so the poles (i and j) match those in the remote control.
9
SC-PT560_860E-RQTX0098-R_eng.book  Page 9  Tuesday, December 4, 2007  9:02 AM
 
						

							10
Simple Setup
Performing QUICK SETUP
RQTX0098 ENGLISH
The QUICK SETUP screen assists you to make necessary settings.
∫Details of settings
≥Underlined items are the factory settings in the above table.
step
6Performing QUICK SETUP
Preparation
Turn on your TV and select the appropriate 
video input mode (e.g. VIDEO 1, AV 1, HDMI, 
etc.).
≥To change your TV’s video input mode, refer to 
its operating instructions.
≥This remote control can perform some basic 
TV operations (➜12).
-SLEEP-REPEAT-FL DISPLAY-PLAY MODE
MUTINGSUBWOOFER-CH SELECT
FUNCTIONS
SETUPSOUND
TOP MENU
MENU
DIRECTNAVIGATOR
STA R T
PLAY
LISTRETURN
SLOW/SEARCH
PLAY PA USE STOP
SKIP
123
456
789
0
10CANCEL
VOL
ONE TOUCH PLAY
FM/EXT-IN
TV/AVVOLiPod/USB
DV D
-W.S.
PL
TV
LEVEL
OK
SETUPRETURN DVD
OK
1Turn on the unit.
2Select “DVD/CD”.
3Show the setup menu.
4Select “OTHERS”.
5Select “QUICK SETUP”.
6Select “SET”.
7Select “YES”.
8Follow the messages 
and make the settings.
≥MENU LANGUAGE
≥TV TYPE
≥TV ASPECT
≥VIDEO OUT – SCART
To return to the previous screen, 
press [RETURN].
9Finish QUICK SETUP.
10Exit.
DV D
SETUP
SET
MAINDISC
VIDEO
AUDIO
DISPLAY
HDMI
OTHERS
EXIT : SETUP RETURN
OK
OK
OK
OK
SET
RETURN
OTHERSQUICK  SETUPSELECT  THE  MENU  LANGUAGE.ENGLISH
FRANÇAIS 
ESPAÑOL
DEUTSCH
P
MAGYAR
CESKY
POLSKI
OK
OK
SETUP
MENU LANGUAGEChoose the language for the 
on-screen messages.≥ENGLISH
≥FRANÇAIS≥ESPAÑOL≥DEUTSCH
≥PУCCKИЙ≥MAGYAR≥ÇESKY≥POLSKI
TV TYPESelect to suit the type of TV.≥STANDARD≥CRT≥LCD
≥PROJECTION≥PLASMA
TV ASPECTChoose the setting to suit your TV 
and preference.≥4:3PAN&SCAN
≥4:3LETTERBOX≥4:3ZOOM
≥16:9NORMAL≥16:9SHRINK≥16:9ZOOM
VIDEO OUT – SCARTChoose the video signal format to be 
output from the SCART (AV) terminal. 
(➜22)≥VIDEO/YPbPr
≥S-VIDEO/YPbPr≥RGB 1/NO OUTPUT
≥RGB 2/NO OUTPUT
10
SC-PT560_860E-RQTX0098-R_eng.book  Page 10  Tuesday, December 4, 2007  9:02 AM