Panasonic Sc Htr210 Operating Instructions

RQTX0151
31

Play
Functions and settings
Reducing 
standby power 
consumption
(Standby mode)
Standby through function 
( pages 25 and 38) 
does not work in this 
mode if you have 
connected through the 
HDMI terminal.
VIERA Link “HDAVI 
Control” ( page 28) will 
not function when this 
system is off.
 Only appears when audio adjustment can be made.
2
1
Press  to select “HDMI”.
3Press  to select “STNBY”.
STNBY, CTRL
5Press  a few times to select 
“EXIT”.
Press
OFF : Standby power consumption reduced...

RQTX0151
32

Play
Functions and settings
Functions and settings
1Press and hold  for about 2 seconds.
Switching the 
attenuator
Switch the attenuator  
“ON” when big sounds 
become distorted while 
playing an analogue 
input source.
2Press  to select 
“ATTENUATOR”.
Press  to 
confirm.
Select “EXIT” and confirm 
to finish the
 setup mode.
•REAL C., BASS, TREBLE, BALANCE, HDMI, TV DELAY,  
DUAL PRG, DRCOMP, ATTENUATOR, REMOTE, INPUT MODE, 
RESET, EXIT
3Press  to select “ON”.
ON, OFFFactory setting: OFF...

RQTX0151
33

Play
Functions and settings
Reset 
(factory settings)
The operation settings 
for the system will 
be initialised to the 
settings made at the 
time of shipment.
All the settings are reset when you select “YES” and the input selector automatically switches to  
“BD/DVD”.
If you select “NO”, you will return to step 2. To exit setup mode, press [RETURN] a few times to 
display “EXIT”, and then press [OK].
•
•
2
1
Press  to select “RESET”.
3Press  to select “YES”.
Press and hold  for about 2...

RQTX0151
34

Functions and settings
When other equipment (mini component system, AV amp, etc.) manufactured by Panasonic operate
When using this system’s remote control, other equipment may operate. In this case, switch this system’s remote 
control code to “REMOTE 1”. Do the following to set the same code number for this system and remote control.
1, 2
3.Press  to select the number.
The remote control code on this system is set.
You cannot finish the setting mode until the setting on the remote control...

RQTX0151
35

Error messages
DisplayCheck point/Cause/CountermeasurePages
Set the same remote control code for this system and remote control.
If “REMOTE 2” is displayed, set remote control code to “2”.
If “REMOTE 1” is displayed, set remote control code to “1”.
•34
The equipment connected by the HDMI cable is not compatible with this  
system’s copyright protection technology.
•—
The system is receiving video signals that are incompatible with it through 
HDMI connection. Check the settings of the...

RQTX0151
36

ProblemPossible solutionPages
Common problems
No power.Ensure the AC mains lead is connected.•22
No sound or image after 
playback starts.
Select the correct source.
Turn the muting off.
Check that the digital signals can be decoded by this system.
Cannot playback PCM signal with sampling frequency over 96 kHz.
Check connections to other equipment.
Set “DIG” or “ANLG” in “Setting input signals”.
Set “AUTO” in “Setting input signals”.
Turn this system off then on again.
•
•
•
•
•
•
•
24, 25...

RQTX0151
37

ProblemPossible solutionPages
HDMI
W h e n   V I E R A   L i n k   “ H D AV I 
Control”    does  not  function 
properlyConfirm “Setting VIERA Link 
“HDAVI Control” to “OFF”” is set to “ON” (in simultaneous operation). When it is “OFF”, change to “ON”.VIERA Link “HDAVI Control” does not function in power saving standby mode when this system is turned off. See “Reducing standby power consumption (Standby mode)” and set to “ON” (normal power consumption).Check VIERA Link “HDAVI Control”...

RQTX0151
38

Maintenance
Unplug the AC mains lead from the household mains socket and wipe the system using a soft and dry cloth.
When the system is very dirty, wring the cloth soaked in water thoroughly, wipe the dirt and wipe moisture off with a 
dry cloth.
Do not use solvents such as benzine, thinner, alcohol, etc. because they may cause casing to deform and coating to 
go off.
Before using chemically treated cloth, read the instructions that come with the cloth carefully.
•
•
•
Reference...

RQTX0151
39

Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical 
and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to 
applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC 
and...

RQTX0151-2B
H0308FL2048
Matsushita Electric Industrial Co., Ltd.
Web Site: http://panasonic.net
Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
En
VAROITUS!
•  ÄLÄ ASENNA TAI LAITA TÄTÄ LAITETTA 
KABINETTITYYPPISEEN KIRJAKAAPPIIN TAI MUUHUN 
SULJETTUUN TILAAN, JOTTA TUULETUS ONNISTUISI. 
VARMISTA, ETTÄ VERHO TAI MIKÄÄN MUU MATERIAALI 
EI HUONONNA TUULETUSTA, JOTTA VÄLTETTÄISIIN 
YLIKUUMENEMISESTA...