Panasonic Sc Htr210 Operating Instructions

RQTX0151
11

Removing casters
How to lift the rack
  Lift the back side of the 
top board and insert your 
hand to the bottom of the 
back side.
  Insert your hand to the 
bottom of the front side.
  Lift the rack horizontally 
using your both hands.
Remove casters at unstable places. (thick-piled carpet, 
etc.)
Spread soft cloth on the floor and tip the rack back to 
remove the casters.
Hold and pull to remove.
At least 2 people are necessary for removing casters.
Make sure that at least 2 people...

RQTX0151
12

Shelf assembly
Installing and assembling the rack
Glass top panel assembly
(Side view)
Adjust the glass top panel (included) 
to protrusion.
The glass top panel has the front side and back 
side. Face up the front side with the sticker.
The nonslip sheet has been put on the top panel of 
the rack. Do not remove the sheet when installing 
the glass top panel.
•
•
Put it down slowly adjusting to the 
top panel of the rack.
Note
Lift up and down slowly not to make an impact on the glass.
1
2...

RQTX0151
13

Installing the television (Please also refer to the television’s operating instructions.)
Installing a DVD player/Blu-ray Disc player/DVD recorder or other equipment on 
the shelf (Please also refer to the other equipment’s operating instructions.)
1
Press the cut-out on the back panel using 
your thumb etc. with force to remove it for 
wiring after installing the equipment.
Refer to pages 16 to 21 for connections with other 
equipment.
If the operating instructions of the equipment require...

RQTX0151
14

Setting the caster stoppers
y
Stabilising the television
  Attach the television to the rack to prevent it from falling over.
  Fixing to the rack
Attach the fall-prevention band etc. supplied with TV using 
the included screws as illustrated at right. (If the fall-pre-
vention band is not supplied with TV, use a commercially 
available band to fix.)
Attach the fall-prevention band to the prepared hole in the 
center of the underside of the top board.
If the hole is not positioned at a...

RQTX0151
15

Glass door assembly
Remove 4 screws from the glass holder 
using a Phillips-head screwdriver and 
take out the board.
Before taking out the board, remove the tape fixing the 
glass holder.
Use the Phillips-head screwdriver that matches the screw 
size.
Insert the glass door (included) to the 
glass holder firmly and tighten 
 
the 2 screws in front tentatively.
The illustration at right shows how to fix the left glass door.
One side of the magnet catch has a hole. 
This is the inner side of...

RQTX0151
16

Basic connections
(For the United Kingdom and continental Europe)
Connection
Home Theater connections
Reduce the volume on the television and select “TV ” after you have done connections as 
above if you want to use this system.
TV
Audio out
R     L
Use this connection 
so audio from the 
equipment can be 
heard through the 
television’s speakers 
even if this system is 
in standby mode.
AUDIO IN
Video 
cable Audio 
cable
Amplifier
DVD player etc.
VIDEO 
OUT AUDIO OUT
Stereo phono cable (not...

RQTX0151
17

Turn off all components before making any connections.
To connect equipment, refer to the appropriate operating 
instructions.
•
•
Connection
Home Theater connections
Audio 
cable
HDMI cable notes
Use a Panasonic HDMI cable for best results.•
HDMI cable (not included)Optical fibre cable (not included)
Connecting the optical 
fibre cable
Note the 
shape and fit 
it correctly 
into the 
terminal.
Do not 
bend!
Connecting equipment with HDMI terminal (TV, DVD recorder, etc.)
Connection cable...

RQTX0151
18

Home Theater connections
Connecting the optical fibre 
cable
Note the shape 
and fit it 
 
correctly into the 
terminal.Do not 
bend!
Optical fibre cable (not included)
Connecting with digital terminal-mouted equipment
Connection cable
Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.•
TV
Digital audio 
out (optical)
Connect the video 
directly from the 
other equipment to 
the television. 
VIDEO INAUDIO IN
Use this connection 
so...

RQTX0151
19

Turn off all components before making any connections.
To connect equipment, refer to the appropriate operating 
instructions.
•
•
Optical fibre cable (not included)
Connection
Home Theater connections
Stereo phono cable (not included)
Connecting the optical fibre 
cable
Note the shape 
and fit it 
 
correctly into the 
terminal.Do not 
bend!
Connecting with VCR
Connection cable
Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.•...

RQTX0151
20




Connecting the optical fibre 
cable
Note the 
shape and fit it 
correctly into 
the terminal.Do not bend!
Connection cable
Optical fibre cable (not included)
Connecting a set top box (cable or satellite)
Connect the video 
directly from the 
other equipment to 
the television. 
VIDEO IN
Use this 
connection so 
audio from the 
equipment can 
be heard through 
the television’s 
speakers even if 
this system is in 
standby mode.
AUDIO IN
TV
Video 
cable
Audio 
cable
VIDEO
OUT
AUDIO
OUT
Cable...