Panasonic Sc Htb580 Owners Manual

Getting started
RQT992211
This system cannot pass-through the 4K content of a 4K compatible equipment to a 4K Ultra HD TV. 
However, you can connect the system to a 4K Ultra HD TV to enjoy the 4K content.
AHDMI cable
	≥Refer to the operating instructions of the 4K Ultra HD TV (VIERA) and the 4K/60p compatible equipment for setup and for 
playing the 4K content.
≥To enjoy multi-channel output from this system, set the audio output of other equipment to Bitstream.
≥The audio signal input to this system is...

12RQT9922
Place the infrared emitter in sight of the TV’s remote control signal 
sensor.
≥For the location of the TV’s remote control signal sensor, refer to the operating instructions for the TV.
Aim the TV’s remote control at this system’s remote control sensor and 
operate the TV.
≥For the location of this system’s remote control signal sensor, refer to page 8.
≥Make sure to clean the surface, where the adhesive tape is to be attached.
≥If you peel off the adhesive tape, the surface may become damaged...

Getting started
Precautions
RQT992213
Step 2  Placement
	≥Do not hold the main unit in one hand to avoid injury, you may drop the main unit when carrying it.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
When carrying the active subwoofer
To avoid interference, maintain the following distances between the main unit/active subwoofer 
and other electronic devices that use the same radio frequency (2.4 GHz band).
Safety Precautions
Professional installation is...

14RQT9922
Choose a placement method that suits you best.
∫When placing the main unit in front of the TV
The main unit may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic 
Tracking System) sensor, remote control sensor, etc.) and the 3D Eyewear transmitters on a 3D 
compatible TV.
≥If interference occurs, move the main unit further away from the TV. If the TV still does not function 
correctly, try using it in a rack or in the wall mount position.
∫If the TV’s remote control...

Getting started
Precautions
RQT992215
Additionally required accessories (commercially available)
≥Fall prevention cord  ......................................................................................................................  k 2
≥Screw eyes (to attach the fall prevention cord) .............................................................................  k 2
	≥Use commercially available screws that are capable of supporting over 26 kg (57.3 lbs).
≥Use a cord that is capable of supporting...

16RQT9922
The main unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the 
screw used and the wall are strong enough to support the weight of at least 26 kg (57.3 lbs).
The screws and other items are not supplied as the type and size will vary with each installation.
≥Refer to step 3 for details about the required screws.
≥Be sure to attach the fall prevention cord as a secondary safety measure.
Supplied accessories
Additionally required accessories (commercially...

Getting started
Precautions
RQT992217
Attach the wall mount brackets to the main unit.
AWall mount bracket (supplied)
BScrew (supplied)
Drive a screw into the wall.
≥Use the measurements indicated below to identify the screwing positions on the wall.
≥Leave at least 100 mm (315/16q) of space above of the main unit to allow enough space for fitting the main unit.
≥Position the main unit with at least 50 mm (2q) of free space to its right. If not, it may not be possible to access the buttons.
≥Be sure to...

18RQT9922
Fit the main unit securely onto the screw(s).
Secure the cord to the wall.
≥Make sure that the slack of the cord is minimal.
AScrew eye
BCord
DODO NOT
≥Move the speaker so 
that the screw is in 
this position.≥In this position, the 
speaker will likely fall 
if moved to the left or 
right.


SC-HTB580P_RQT9922-Y.book  18 ページ  ２０１３年１２月１９日　木曜日　午前１１時０分 

Getting started
Precautions
RQT992219
Step 3  Wireless connections
Preparation
≥Turn on the main unit.
Press [BÍ CI].
Active subwoofer on/off button [B Í C I]
Use this button to turn the active subwoofer on 
and off.
C I:
The active subwoofer is on.
B Í:
The active subwoofer is off.
The active subwoofer will still consume a small 
amount of power even when it is turned off (
B, Í).
Check that the wireless link is 
activated.
WIRELESS LINK indicator
Lights red:
The wireless link is not activated.
Lights...

20RQT9922
For NFC-compatible AndroidTM devices only
Simply by touching an NFC (Near Field 
Communication)-compatible Bluetooth
® device on 
the main unit, you can complete all preparations, 
from registering a Bluetooth
® device to 
establishing a connection.
≥Android device version lower than 4.1 requires 
the installation of the app “Panasonic Music 
Streaming” (Free of charge). Download the app 
to your Bluetooth
® device.– Enter “Panasonic Music Streaming” in the search 
box of Google PlayTM to...