Panasonic Sc Htb580 Owners Manual

Getting started
Operations
RQT992221
Operations
Using this system
Preparation
≥Turn on the active subwoofer.
≥Turn on the TV and/or connected device.
Press [Í] to turn on the main unit.
Select the source.
≥This remote control cannot be used to control the 
operations of the connected devices.
∫When “BLUETOOTH” is selected as 
the source
On the Bluetooth® device:
Select this system as the output source of the 
connected Bluetooth
® device and start the 
playback.
∫When “BD/DVD” is selected as the 
source...

22RQT9922
3D sound
This system provides a feeling that the sound and 
the image are as one.
≥To change the applied effect, refer to “Sound 
menu”. (>right)
	≥Dolby Virtual Speaker effect is ON except in STEREO 
mode.
≥To turn off Dolby Virtual Speaker and the 3D surround 
effects, select “STEREO” as the sound mode. (>right)
≥To turn off the 3D surround and the Clear-mode dialog 
effects, refer to “3D CLR DIALOG”. (>p. 23)
Sound menu
Press [SOUND] repeatedly to select 
the sound effect.
Press [
3,4]...

Operations
RQT992223
	≥The default setting is underlined. Changed settings will be 
kept until it is changed again, unless otherwise indicated.
You can view the current audio format.
Press and hold [SOUND] for more than 4 sec.H.BASSEnhances the harmonic 
bass effect.
ON
OFF
3D CLR 
DIALOGThe 3D Clear Mode Dialog 
feature creates a sound 
field similar to the sound 
coming from a TV screen 
and makes dialogues 
clearer.
ON: 3D Surround, Clear 
Mode Dialog and Dolby 
Virtual Speaker effect
OFF: Dolby...

24RQT9922
Setup menu
Press [SETUP] repeatedly to select 
the setup item.
Press [
3,4] repeatedly to select 
the desired setting and then press 
[OK].
	≥The default setting is underlined. Changed settings will be 
kept until it is changed again, unless otherwise indicated.
DIMMERDims the display after 
5 seconds of inactivity.
ON
OFF
AUTO 
POWER 
DOWNThe main unit is 
automatically turned off if 
there is no audio input and 
when you do not use it for 
approx. 20 minutes.
ON
OFF
VOL 
LIMITATION
Sets the...

Operations
RQT992225
Linked operations with the TV 
(VIERA Link
TM “HDAVI ControlTM”)
Preparation
1Confirm that the HDMI connection has been 
made. (>p. 9, 10)
2Set the “HDAVI Control” operations on the 
connected equipment (e.g., TV).
3For the optimal “HDAVI Control” operations 
change the following settings on the 
connected TV
§1.≥Set the default speaker settings to this system.§2
≥Set the spe aker selection settings to this system.4Turn on all “HDAVI Control” compatible 
equipment and select the TV’s...

26RQT9922
Reference
Troubleshooting
Before requesting service, make the following 
checks. If you are in doubt about some of the 
check points, or if the solutions indicated in the 
following guide do not solve the problem, refer to 
“Customer Services Directory (United States and 
Puerto Rico)” on page 32 if you reside in the 
U.S.A. or Puerto Rico, or refer to “Limited 
Warranty (ONLY FOR CANADA)” on page 33 if 
you reside in Canada.
No power.
≥Unplug the AC power supply cord for 10 sec 
before plug in...

Reference
RQT992227
The first few seconds of audio cannot be 
heard when using the HDMI connection.
This may occur during DVD-Video chapter 
playback. Change the digital audio output setting 
on the connected device from “Bitstream” to 
“PCM”.
When operating an HDMI compatible device of 
a different brand, the main unit reacts in an 
unwanted manner.
HDAVI Control commands may use a different 
signal depending on the brand of the device. In 
this case, turn VIERA Link off. (>p. 24)
Pairing cannot be...

28RQT9922
There is no audio.
The power of the main unit turns off 
automatically.
(When the main unit detects a problem, a safety 
measure is activated and the main unit 
automatically switches to standby mode.)
≥There is a problem with the amplifier.
≥Is the volume extremely high?
If so, lower the volume.
≥Is this system placed in an extremely hot place?
If so, move this system to a cooler place and 
wait a few moments and then try to turn it on 
again.
If the problem persists, confirm the display, turn...

Reference
RQT992229
About Bluetooth®
∫Frequency band used
This system uses the 2.4 GHz frequency band.
∫Certification of this device
≥This system conforms to frequency restrictions 
and has received certification based on 
frequency laws. Thus, a wireless permit is not 
necessary.
≥The action below are punishable by law in some 
countries:
jTaking apart or modifying the unit.
jRemoving specification indications.
∫Restrictions of use
≥Wireless transmission and/or usage with all 
Bluetooth® equipped...

30RQT9922
Specifications
AMPLIFIER SECTION
RMS output power: Dolby Digital Mode
Front ch (L, R ch)
60 W per channel (6≠), 1 kHz, 10 % THD
Center ch (C ch)
60 W per channel (6≠),1kHz,10%THD
Subwoofer ch
130 W per channel (8≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power
310 W
FTC output power: Dolby Digital Mode
Front ch (L, R ch)
30 W per channel (6≠),
170 Hz to 20 kHz, 1 % THD
Center ch (C ch)
30 W per channel (6≠),
170 Hz to 20 kHz, 1 % THD
Subwoofer ch
80 W per channel (8≠),
40 Hz to 200 Hz, 1...