Panasonic Recording Software Wv Asr500 Operating Instructions

1011
Software overview
License
Recording Software
 Channel License: WV-ASRE501, WV-ASRE501W, WV-ASRE516, WV-ASRE516W, WV-ASRE532, 
WV-ASRE532W, WV-ASRE564, WV-ASRE564W
  Upgrade License: WV-ASRE571, WV-ASRE571W, WV-ASRE572, WV-ASRE572W, WV-ASRE599, 
WV-ASRE599W
Update Software
  Software Update License: WV-ASRM501, WV-ASRM501W, WV-ASRM516, WV-ASRM516W, 
WV-ASRM532, WV-ASRM532W, WV-ASRM564, WV-ASRM564W, WV-ASRM571, WV-ASRM571\
W
  Software Update License of Expired license: WV-ASRX501, WV-ASRX501W,...

1213
Panasonic recommends that all servers be configured with one system admi\
nistrator account with Remote 
Desktop remote access for system support.
The Server can be accessed from multiple Client, which can be running from the same computer as the Server 
or from remotely networked computers. The Server has been preconfigured \
with one user.
About the Client
Click the logo in the upper-right corner of the page to open the "About \
ASR500 Series Client" window.
1.  The window lists the...

1213
Config (Setup) page overview
Config (Setup) Page allows you to configure systems, cameras, and othe\
r devices.Configuration Tree
 
q
  This tree allows you to open the various configu-
ration pages for each connected system. Each of 
the pages is described in detail in the following 
sections. Systems
 
w
  This default Config page displays systems that 
have been added.
q
w 

1415
Add Systems
The "Add Systems" page allows you to add systems so that you can connect\
 to them with this System.
To add a system, click the [New] button. 
 
q
(Alternatively, you can find a system, as discussed 
below.)
The new system is added to the "System List". 
 
w
The "System Information" fields are enabled.
Enter the system's hostname or IP address. 
 
e
Contact the system administrator for details.
By default, the port number is 22609; change this 
 
r
only if...

1415
System
The "System" page allows you to set basic system parameters for the clie\
nt application. The page is separated 
into the following tabs:
The [System] tab allows you to create a name for the system, export and import setti\
ngs from other systems, 
import and export graphics, and manage the licensing of your system.The "MAC Address" of the system's primary net-
 
q
work adaptor is used to generate a license key. To 
obtain a license key online, provide the system 
MAC...

1617
Select the time zone and daylight saving time 
 
q
(DST) information for the server's location.
On systems with Internet access, select "Enable 
 
w
Time Server" and enter a valid Internet time 
server. On systems without Internet access, select 
"Enable Time Server" and enter an internal time 
server (see your network administrator for more 
information).
The [Date/Time] tab displays the Server's time information.
q
w
e
If the IP cameras on the network need to synchro-
 
e...

1617
Select a network connection from the "Network 
 
q
Interface" drop-down list to display its informa-
tion. Systems with multiple NICs have more than 
one entry in the list.
Enter the 
 
w "IP Configuration" information for the 
network connection. "Gateway" and "Primary 
DNS" information is required to connect with a 
network time server. Click the [Apply] button.
Select the correct bandwidth setting to limit net-
 
e
work traffic from the server to client computers...

1819
This function cannot be used for ASR500. 

1819
Add IP Cameras
The "Add IP Cameras" page allows you to add IP cameras and devices to the system\
 and configure their set -
tings. The following features are available on the IP Cameras page:
The "Find IP Cameras" section scans for sup-
 
q
ported IP cameras available on the same network 
that the system is connected to. If you don't see 
an IP camera that you expect to see on the net-
work, verify that the camera has been configured 
and that the camera can be pinged from a...

2021
IP Camera Recording
The "Camera Recording" page allows you to enable IP cameras to record vi\
deo and configure recording set-
tings. The following features are available on the IP Cameras page:The "Filters" list allows you to select which cam-
 
q
eras are displayed in the "Cameras" list, based on 
categories such as camera type, recording status, 
resolution, and more.
The "Cameras" list displays all cameras on the 
 
w
selected server that match the criteria...