Panasonic Recordable Dvd Home Theater System Sc Ht1000 Operating Instructions

31
RQT7061
EDITING
[RAM]
5Press [ENTER] at the start point of the 
section you want to erase.
6Press [ENTER] at the end point of the 
section you want to erase.
To continue using Shorten Segment
1 Press [3, 4] to select “Next” and press [ENTER], then press [2] 
to select “Erase” and press [ENTER].
2 Repeat steps 5 and 6.
3Press [3, 4] to select “Exit” and 
press [ENTER]. 
4Press [2] to select “Erase” and press 
[ENTER]. 
Segments are erased from the start to end point.
[Note]
≥You can use basic functions...

32
RQT7061
EDITING
Disc setting
[RAM] [DVD-R]
Entering text (➡page 26)
[RAM]
If set, this will protect the disc from accidental erasure.
4Press [2] to set disc protection and 
press [ENTER]. 
The lock symbol appears closed when the disc is write-
protected.
[RAM]
4Press [2] to select “Yes” and press 
[ENTER].
5Press [2] to select “Start” and press 
[ENTER].
All programs and play lists are erased.
[Note]
≥Computer data cannot be erased.
≥Erase does not work if one or more programs are protected.
Common...

33
RQT7061
EDITING
[RAM]
Some DVD-RAM are unformatted. Format them before using them in 
this unit. Formatting also allows you to erase the entire contents of a 
disc.
Preparation
If the disc is dirty, clean it with the recommended cleaner 
(➡page 53) before formatting.
4Press [2] to select “Yes” and press 
[ENTER].
5Press [2] to select “Start” and press 
[ENTER].
Formatting starts.
≥A message appears when formatting is finished.
6Press [ENTER] to complete the 
procedure.
To stop formatting
Press...

34
RQT7061
RADIO & 
SOUND
The radio
Preparation
≥Switch [HOME THEATER, TV] to “HOME THEATER”.
≥Press [FM/AM] to select “FM” or “AM” as the source.
1Press [X TUNING] or [TUNING W] to 
select the frequency of the required 
station.
Remote control: Press [6] or [5].
TUNED: Displayed when a radio station is 
tuned.
ST: Displayed when a stereo FM 
broadcast is being received.
Press and hold [X TUNING] or [TUNING W] ([6] or [5] 
on the remote control) until the frequency starts scrolling to 
start automatic...

35
RQT7061
RADIO &
SOUND
Use FM outdoor antenna if radio reception is poor.
[Note]
≥Disconnect the outdoor antenna when the unit is not in use.
≥Do not use the outdoor antenna during an electrical storm.
Optional FM antenna connection
A
AC INVHF/UHF
RF IN
RF OUT
R-AUDIO-L
COMPONENT
VIDEO OUT(480P/480I)Y
P
B
PR
EXT LOOP75
VIDEO S-VIDEO
IN1
IN3
R-AUDIO-L R-AUDIO-L
VIDEO
OPTICAL
IN
AM ANT FM ANT
(L1)
(L3)S-VIDEO
LOOP
ANT
GND
VIDEO S-VIDEO
OUT
11 2
FM outdoor antenna (Using a television antenna)
≥Disconnect...

36
RQT7061
RADIO & 
SOUND
Sound
≥Dolby Digital and DTS are digital encoding systems used on DVD 
to carry surround sound. Both were originally developed for use in 
cinemas.
≥This unit automatically recognizes and decodes these systems.
Play a Dolby Digital or DTS source.
The Dolby Digital or DTS indicator lights.
∫To down-mix Dolby Digital or DTS (multiple-
channel) signals to 2 channels
Press [SHIFT]i[MIX 2CH].
To cancel, press [SHIFT]i[MIX 2CH] 
again.
When “D.MIX” flashes on the display [DVD-A]
The...

37
RQT7061
RADIO &
SOUND
This mode is useful if you have to place your 
surround speakers near the front speakers due 
to the layout of your room.
This mode makes it seem like the sound from 
the surround speakers is coming from behind 
you.
Press and hold [SHIFT]r[MULTI REAR] for 
more than 5 seconds.
Each time you do this:
V. R . S  O N
!)V. R . S  O F F
This mode makes it seem like sound is coming 
from multiple rear surround speakers virtually 
when connected with surround speakers.
Press...

38
RQT7061
SETTINGS
Changing the unit’s settings
This chart shows the initial settings for this unit. See pages 40–43 for details on menu operation.
≥Underlined items are the factory presets.
Continued on next page.
Summary of settings
Tabs Menus Options
ChannelAntenna System (➡page 40)≥TV≥CATV
Auto Channel Setting (➡page 40)
Preset Channel Caption (➡page 41)
Manual Channel Caption (➡page 41)
VCR Plusr CH Setting (➡page 10)
Set UpOff Timer
Select how long the unit remains on when it is not being 
used.≥2...

39
RQT7061
SETTINGS
Tabs Menus Options
VideoSeamless Play
Turn seamless play on or off on discs with play lists.
≥Seamless Play does not work with programs recorded in 
LPCM or when using Quick View.≥On: The scenes in play lists are played seamlessly. This may 
cause shifting of the points where scenes change. Some 
play lists cannot be played seamlessly.
≥Off: The points where scenes in play lists change are played 
accurately, but the picture may freeze for a moment.
Black Level Control
Select normal,...

40
RQT7061
SETTINGS
Changing the unit’s settings
See pages 38 and 39 for menu and option details.
1While stopped
Press [SHIFT]r[SETUP] to show the 
menus.
2Press [3, 4] to select the menu’s tab 
and press [1].
3Press [3, 4] to select the menu and 
press [ENTER].
4Press [3, 4] to select the option and 
press [ENTER].
The screen now shows the menu again.
≥Some items require different operations. Follow the on-screen 
instructions, or read the following explanations.
To return to the previous screen
Press...