Panasonic Recordable Dvd Home Theater System Sc Ht1000 Operating Instructions

11
RQT7061
INTRO
STEP 3Set up to match your television
Change the settings if your television is:
≥Progressive
–Read your television’s operating instructions for details.
≥Widescreen (16:9 aspect ratio)
1Press [SHIFT]r[SETUP] to show the 
menus.
2Press [3, 4] to select “TV Screen” 
and press [1].
3Press [3, 4] to select “TV Type” and 
press [ENTER].
4Press [3, 4] to select the item and 
press [ENTER].
If you select a progressive output (480P) item, select Video in 
the on-screen menu and set “Transfer”...

12
RQT7061
RECORDING
Recording television programs
You can insert a cartridge or non-cartridge disc.
≥Load double-sided discs so the label for the side you want to 
record/play is facing up.
≥When using 8 cm (3″) DVD-RAM, remove the disc from the 
cartridge and insert it, making sure you align it with the groove.
≥It is not possible to record/play continuously from one side of 
a double sided disc to the other. You will need to eject the disc 
and turn it over.[RAM] [DVD-R]
Preparation
≥Release...

13
RQT7061
RECORDING
The unit calculates a recording rate that enables the recording to fit 
in the time you set (within the remaining time on the disc) and with 
the best possible picture quality.
1While stopped
Press [F.Rec].
2Press [2, 1] to select “Hour” and 
“Min.” and press [3, 4] to set the 
recording time.
You can also set the recording time with the numbered 
buttons.
3Press [3, 4, 2, 1] to select “Start” 
and press [ENTER].
Recording starts.
To show the remaining time
Press [STATUS].
[Note]
It...

14
RQT7061
RECORDING
Timer recording
[RAM] [DVD-R]
You can enter up to 16 programs up to a month in advance. 
(Each daily or weekly program is counted as one program.)Preparation
≥Set the clock and guide channels for VCR Plusi recording 
(➡page 10) correctly.
≥Release protection before proceeding. [RAM]
(Cartridge ➡page 8, disc➡page 32)
Entering VCR Plusi codes is an easy way of programming the unit 
for recording. You can find these codes in newspapers and 
magazines.
1Pres s [VCR Plusr].
2Press the...

15
RQT7061
RECORDING
1Press [PROG/CHECK].
2Press [3, 4] to select “New Timer 
Program” and press [ENTER].
3Press [1] to move through the items 
and change the items with [3, 4].
≥The current settings are shown each time you press [1].
≥You may use the numbered buttons to enter the CHANNEL, 
DATE, ON (Start Time), and OFF (Finish Time).
≥CHANNEL (Channel number and caption)
≥DATE
[.Current date
l;:
lNext day up to one month later minus one day
l;:
lWeekly timer: SUN-SAT>MON-SAT>MON-FRI
l;:
{.Daily timer:...

16
RQT7061
RECORDING
Timer recording
[RAM] [DVD-R]
1Press [PROG/CHECK].
Icon explanations
≥Programs that failed to record are displayed gray. They are 
automatically deleted from the timer recording list at 4 a.m. two 
days later.
Message displayed in the CHECK line
2Press [PROG/CHECK]. 
The timer recording list disappears.
1Press [PROG/CHECK].
The timer recording list appears.
2Press [3, 4] to select the program.
≥You may also select programs with the numbered buttons.
e.g., “5”: [0] ➡ [5]
“15”: [1] ➡...

17
RQT7061
RECORDING
Playing while you are recording
[RAM]
Press [1] (PLAY).
Time slip indicator on the main unit lights.
Play starts from the beginning of the program being recorded.
[Note]
Sound is not output while fast-forwarding.While recording, you can play a program previously recorded.
1During recording
Press [DIRECT NAVIGATOR].
Time slip indicator on the main unit lights.
2Press [3, 4] to select a program and 
press [ENTER].
[Note]
≥Sound is not output while fast-forwarding.
≥You cannot edit...

18
RQT7061
PLAYING
Playing discs
[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
Preparation
≥Switch [HOME THEATER, TV] to “HOME THEATER”.
≥Press [DVD] to select “DVD/CD” as the source.
1Press [Í POWER] to turn the unit on.
2Press [< OPEN/CLOSE] to open the 
tray and insert a disc (➡page 12).
≥Press the button again to close the tray.
≥If cartridge protection is activated (➡page 8), play begins 
automatically when you close the tray. [RAM]
3Press [1] (PLAY).
The unit takes some time to read the 
disc...

19
RQT7061
PLAYING
[RAM] [DVD-R]
A list of programs is created as you record them. You can use this list 
to find programs to watch.
1Press [DIRECT NAVIGATOR].
The highlighted program plays in the background.
2Press [3, 4] to select the program 
and press [ENTER].
You can also select programs with the numbered buttons.
e.g., “5”: [0] ➡ [5]
“15”: [1] ➡ [5]
To clear the program list
Press [DIRECT NAVIGATOR].
[RAM] [DVD-A] [DVD-V] [VCD]
To change the audio
Press [SHIFT]r[AUDIO].
∫While playing DVD-RAM or...

20
RQT7061
PLAYING
Playing discs
[RAM] [DVD-R]
1During play
Press [TIME SLIP].
2Within 5 seconds
Press [3, 4] to enter the time and 
then press [ENTER].
e.g., Go back to 5 minutes
Press to alter in one-minute units. Press and hold to alter in 
10-minute units.
[RAM] (Only with Dolby Digital)
You can increase the speed of play without disrupting the 
soundtrack.
During play
Press and hold [1] (PLAY/ t1.3).
To return to normal speed
Press [1] (PLAY/
k1.3).
[Note]
≥This is canceled if you perform operations...