Panasonic Pv Gs400 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Pv Gs400 Operating Instructions Manual. The Panasonic manuals for Digital Camcorder are available online for free. You can easily download all the documents as PDF.
Page 71
Others 71 Others Indicators Various functions and Camcorder status are shown on the screen. r: Remaining Battery Power ≥When the battery power becomes low, the Indicator changes. When the battery is discharged completely, the u (v) Indicator flashes. R0:45: Remaining Tape Time ≥Remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indicator starts flashing.) : Tape Recording Mode -27-: Tape Playback Mode -44-: Card Recording Mode -29-: Picture Playback Mode -47-:...
Page 72
Others 72 : Soft Skin Mode -34-PICTURE: Picture -47-TITLE: Title picture -49-WEB : WEB CAMERA Mode (recording) -60-WEB : WEB CAMERA Mode (playback) -60-PRINT (Highlighted): PictBridge Mode -56-VOLUME: Volume adjustment -44-3:30:45PM: Date/Time Indication N (F, E): Photoshot Picture Quality (during Photoshot recording) [F] means Fine, [N] means Normal and [E] means Economy. -30-0: Remaining Number of Photoshot pictures : RapidFire Consecutive Photoshot Recording -30-: Lock Setting -50-¥ (White):...
Page 73
Others 73 Warning/Alarm Indicators If any one of the following indicators lights up or flashes, please check the condition of the Camcorder. 3DEW (DEW DETECT/EJECT TAPE): Condensation has occurred. -83-Y (CHECK REC TAB): The accidental erasure prevention switch on the inserted Cassette is open (that is, set to [SAVE]). You are attempting Audio dubbing or Digital dubbing on a Tape while setting the accidental erasure prevention switch to [SAVE]. Y (TAPE NOT INSERTED): No Cassette in inserted....
Page 74
Others 74 CAN NOT OPERATE (AE LOCK MODE): You are attempting to press the [ADVANCED MAGICPIX] Button with setting the [AUTO/MANUAL/AE LOCK] Switch to [AE LOCK]. UNABLE TO WRITE (WIDE/PRO CINEMA MODE): You are attempting to press the [PHOTO SHOT] Button with setting the Wide/Pro-Cinema Function in Tape Recording Mode. CHANGE TO 640k480: You are attempting to use the function to record still pictures which is not available unless the [PICTURE SIZE] is set to [640k480]. PRINTER ERROR: Check the...
Page 75
Others 75 ªRecording on a Card≥Pictures with wide-screen format signals cannot be copied. ≥When the color of the screen changes or blurs, adjust the shutter speed manually to 1/60 or 1/100. Photoshot ≥When you record pictures in the Tape Recording Mode, the brightness of the picture may differ from the one recorded in the Card Recording Mode. ≥Sound cannot be recorded. ≥The file format supported by this Camcorder is JPEG. ≥If [NORMAL] or [ECONOMY] is selected for recording, mosaic-pattern noise...
Page 76
Others 76 ≥When you rotate the Mode Dial or remove the battery, Quick Start Recording Lamp is turned off and Quick Start Mode is canceled. However, if the Camcorder is turned on and the Tape/Card Recording Mode is set, the Lamp turns on and Quick Start Mode is restored. ≥If the [QUICK START] Button is pressed and held for approximately 2 seconds during the Quick Start Standby Mode, the Lamp will go off and the Camcorder will be completely turned off. ≥If the Camcorder is not operated for...
Page 77
Others 77 ªWind Noise Reduction Function≥Does not work with the microphone on the Magic Wire Remote Control with Narration Mic nor an external microphone. ≥When it is set to [ON], directivity of microphone is regulated depending on the strength of wind to reduce wind noise. ªWide/Pro-Cinema Function≥You cannot use these modes when recording on the card. ≥The Wide/Pro-Cinema Mode cannot be used simultaneously with the following functions. ≥Progressive function ≥Cinema Mode ≥The Pro-Cinema Mode...
Page 78
Others 78 ≥If you are using MagicPix Mode (-34-) or Program AE Mode (-35-), you cannot adjust the shutter speed. Card Slow Shutter Mode ≥The subject may not be focused in dark scenes with less luminance or scenes with less contrast. ≥Buttons cannot be activated except the [OFF/ON] Switch, the Mode Dial and the [AUTO/MANUAL/AE LOCK] Switch while the Camcorder is focusing on the subject. ≥When you take a picture of people at night, you can achieve adequate brightness for both the people and the...
Page 79
Others 79 ≥The Camcorder, even when its Flash has been turned off, automatically determines whether the flash light is necessary or not by detecting the ambient brightness. (If it determines that the flash light is necessary, the [ ] Indication is displayed in yellow.) ≥When the [ß], [ßi], [ßj], [ß A], [ßAi] or [ßAj] Indicator is displayed, the Flash can be lit. (When flashing in white, the Flash is charging.) When the [ ] Indication is displayed, the Flash will not be lit. ≥Charging the Flash...
Page 80
Others 80 ≥If you dub a tape recorded at [12bit] selected as the [AUDIO REC] on the [RECORDING] Sub-Menu, playback sound becomes stereo sound regardless of the [AUDIO OUT] setting if [12bit AUDIO] is set to [MIX]. ªIndex Search Function≥Index Search may not be possible at the beginning of the tape. ≥Scene Index Search may not function properly if the interval between 2 scene index signals is less than 1 minute. ªPlayback Zoom Function≥You cannot adjust the sound volume with the Remote Controller...