Panasonic Pv Gs400 Operating Instructions Manual

Recording Mode
31
Quick Start
By pressing the [QUICK START] Button (45), the 
Camcorder will be ready for recording in 
approximately 1.7 seconds after the Camcorder is 
turned on.
1Press the [QUICK START] Button (45).
≥The Quick Start Recording Lamp lights up.
2Set the [OFF/ON] Switch (48) to [OFF].
≥The Quick Start Recording Lamp remains lit.
3Set the [OFF/ON] Switch (48) to [ON].
≥The Camcorder will be ready for recording in 
approximately 1.7 seconds.
To Cancel the Quick StartKeep the [QUICK START]...

Recording Mode
32
ªTo Take Close-up Shots of Small 
Subjects
(Macro Close-up Function)
When the zoom magnification is 1k, the 
Camcorder can focus on a subject that is as close 
as approximately 1.6 inches (4 cm) from the 
Lens. Small subjects like insects can be recorded 
with this function.
ªTo Use the Tele-Macro FunctionWith the zoom magnification of 12k, the 
Camcorder can bring the subject into focus as 
close as approximately 19 inch (50 cm) from the 
Lens. Focusing only on the subject and...

Recording Mode
33
2Press the Recording Start/Stop Button (47) 
or [PHOTO SHOT] Button (52) to start 
recording.
To Cancel Image Stabilizer Function
Set [TAPE RECORDING MENU] or 
[CARD RECORDING MENU] >> [CAMERA] >> 
[EIS] >> [OFF].
≥For other notes concerning this item, see 
-76-.
Fade In/Out Functions
Fade In 
Fade In brings out images and sounds gradually 
from a black screen at the beginning of a scene.
1Keep pressing the [FADE] Button (20) 
during the Recording Pause Mode.
≥The image fades out...

Recording Mode
34
MagicPix Functions
Advanced MagicPix Function
This function allows you to record color images 
brightly in a dark place.
1Press the [ADVANCED MAGICPIX] Button (13) until the [MAGICPIX] Indication 
appears.
0 Lux MagicPix Function
Using the LCD Monitor light, a dark scene of 
almost 0 lux can be recorded.
1Press the [ADVANCED MAGICPIX] Button (13) until the [0LUX MAGICPIX] Indication 
appears.
≥The [REVERSE THE LCD MONITOR] 
Indication appears.
2Rotate the LCD Monitor forward (to the...

Recording Mode
35
Wide/Pro-Cinema Function
You can record images compatible with a 
wide-screen format TV which has a Video 
terminal.
The image looks vertically stretched on the 
screen of the Camcorder.
≥The aspect ratio of the playback images in the 
tape differs depending on the TV to be 
connected.
Wide Function
The image is recorded with an aspect ratio of 
16:9.
1Press the [WIDE/PRO-CINEMA] Button (7).
≥The [WIDE] Indication appears.
Pro-Cinema Function
In addition to the effects on Wide Function,...

Recording Mode
36
5) [º] Surf & Snow Mode
≥For recording in glaring surroundings, such 
as ski slopes, beaches, etc.
To Cancel the Program AE FunctionSet the [PROG.AE] on the [CAMERA] Sub-Menu 
to [OFF]. Or, set the [AUTO/MANUAL/AE LOCK] 
Switch to [AUTO].
≥For other notes concerning this item, see 
-77-. 
Recording in Natural Colors
(White Balance)
Depending on the scene or light condition, the 
Automatic White Balance Adjustment Mode may 
not be able to bring out natural colors. In this 
case, the...

Recording Mode
37
To Resume Automatic Adjustment
Press the [WB] Button repeatedly until none of 
the White Balance Mode Indications ([1], [z], 
[{]) appear. Or, set the 
[AUTO/MANUAL/AE LOCK] Switch to [AUTO].
ªAbout White Balance SensorThe White Balance Sensor (33) determines the 
nature of the light source during recording. 
≥Do not cover the White Balance Sensor with 
your hand during recording because White 
Balance will not function normally.
≥The red light from the Recording Lamp 
(34) will 
be...

Recording Mode
38
Manual Iris Adjustment
(F Number)
You can use this function when the screen is too 
bright or too dark.
1Set the [AUTO/MANUAL/AE LOCK] Switch (31) to [MANUAL].
≥The [MNL] Indication appears.
2Press the [SHUTTER/IRIS] Button (27) twice.
≥The Iris Indication appears.
3Turn the Multi Manual Ring (24) to adjust 
the iris.
Range of Iris Adjustment
CLOSE (Closed), F16, ..., F1.7,
OPEN (Opened) 0dB, ..., 18dB
When a value closer to [CLOSE] is selected, the 
image becomes darker.
When a value...

Recording Mode
39
2Set the [AUTO/MANUAL/AE LOCK] Switch (31) to [AE LOCK].
≥The [ ] Indication flashes and then 
lights. The brightness of the picture is now 
locked to the value it had at the moment of 
setting the switch to [AE LOCK].
To Cancel the AE LockSet the [AUTO/MANUAL/AE LOCK] Switch to 
[AUTO] or [MANUAL].
To Lock the Brightness at a Desired Level
After Step 1, set the [AUTO/MANUAL/AE LOCK] 
Switch to [MANUAL] to adjust the iris/gain 
manually (
-38-) and then set the 
[AUTO/MANUAL/AE LOCK]...

Recording Mode
40
AUTO: 
AGC is activated, and the recording level is 
adjusted automatically.
MNL (AGC):
The desired recording level can be set. AGC 
will also be activated to reduce the amount of 
distortion in the audio.
MNL (NO-AGC): 
AGC is not activated and so natural recording 
can be performed. Adjust in such a way that 
the sound will not be distorted at the maximum 
volume level. When the Zoom Microphone 
Function is set to [ON], adjust the recording 
level after pushing the [W/T] Lever toward...