Panasonic Pv Gs400 Operating Instructions Manual

With a PC
61
For Windows 98SE/Me Users
The following messages may be displayed during 
the installation depending on the environment of 
the personal computer. Install the USB Driver as 
instructed below.
1) The message “The file ‘kstvtune.ax’ on 
[Unknown] cannot be found...” is 
displayed.
≥Enter “C:\Windows\system” for 
Windows 98SE.
≥Enter “C:\Windows\options\CABS” for 
Windows Me.
≥If the “kstvtune.ax” file is missing in one of 
the 2 above-mentioned folders, insert the 
OS CD-ROM and assign the...

With a PC
62
ªSetting up MSN MessengerWhen starting MSN Messenger for the first time, 
its setup screen is displayed. (However, the 
screen is not displayed if MSN Messenger setup 
has already been done.) For more details, please 
read the corresponding Help file.
1Click [Sign In].
2Type in your Sign-in name and password.
≥If you do not have your Sign-in name and 
password, click [Get one here] 
3Please carefully read the displayed 
contents and then proceed.
4After the setup is completed, sign in and...

With a PC
63
ªInstalling Video Stream DriverInstall this when your OS is Windows XP SP1 or 
later, or Windows 2000 SP4 or later. Video 
Stream Driver must be installed when you 
connect the Camcorder to the PC with the USB 
Cable and use MotionDV STUDIO.
DirectX 9.0b is installed in your PC if it is not 
installed beforehand.
≥When DirectX 9.0b is installed, applications 
supported by previous versions of DirectX may 
not run. In this case, consult the manufacturers 
of the applications disabled.
1Insert...

With a PC
64
ªTo start MotionDV STUDIOIf you wish to capture data from a tape, set the 
Camcorder to Tape Playback Mode and insert the 
tape. If you wish to capture images from the lens 
of the Camcorder, set the Camcorder to the Tape 
Recording Mode and remove the tape and the 
card.
With USB Connection Cable (supplied)
OS:
Windows XP SP1 or later
Windows 2000 SP4 or later
≥The personal computer should be compatible 
with USB 2.0 Hi-Speed.
Confirmation before connection 
(for Windows XP/2000)
When you...

With a PC
65
Connecting the Camcorder to a personal 
computer
1Set the Mode Dial to Tape Recording Mode 
or Tape Playback Mode.
2Set [CAMERA] or [PLAYBACK] >> 
[USB FUNCTION] >> [MOTION DV].
≥It enters MotionDV STUDIO Mode.
3Connect the Camcorder to the personal 
computer with USB Connection Cable.
4Select [Start] >> [All Programs (Programs)] 
>> [Panasonic] >> 
[MotionDV STUDIO 5.1E LE for DV] >> 
[MotionDV STUDIO].
≥Using the MotionDV STUDIO for Windows, a 
variety of visual effects can be added and...

With a PC
66
3Click [Next].
≥After reading the displayed contents, please 
carry out the installation according to 
instructions.
4Select the Video system.
≥The size and the frame rate of the slide show 
with effects to be outputted are determined by 
the selected Video System (PAL or NTSC).
5After the completion of setup, click on 
[Finish].
≥Installation will be completed.
ªTo start SD Viewer
1Set the Mode Dial to PC Mode.2Connect the Camcorder to the personal 
computer with USB Connection Cable....

With a PC
67
ªOperating environment
For WindowsOS:
IBM PC/AT compatible personal computer with 
pre-installed
Microsoft Windows XP Home Edition/ 
Professional
Microsoft Windows 2000 Professional
Microsoft Windows Me (Millennium Edition)
Microsoft Windows 98 Second Edition 
CPU:
Pentium-based PC or equivalent [1, 3, 4]
Pentium II-based PC or equivalent [2]
(Pentium II 300 MHz or higher recommended)
Graphic display:
High Color (16 bit) or more
Desktop resolution of 800k600 pixels or more
*QuickTime and/or...

With a PC
68
7Double click [PhotoImpression Installer] (or 
[PhotoBase Installer] or 
[PanoramaMaker Installer] or 
[PhotoPrinter Installer]).
8Follow the instructions on the computer 
screen until the installation is complete.
ªTo start software in ArcSoft Software 
Suite
1
Select [Start] >> [All Programs (Programs)] 
>> [ArcSoft Software Suite] >> 
[Panorama Maker 3] (or [PhotoBase 4] or 
[PhotoImpression 4] or [PhotoPrinter 4]).
Refer to Help information about application 
operations and other Error...

With a PC
69
Notes
≥Macintosh is a registered trademark of Apple 
Computer, Inc. ArcSoft, the ArcSoft logo, 
ArcSoft PhotoImpression 4.0, ArcSoft 
PhotoBase 4.0, ArcSoft PhotoBase 2.0, ArcSoft 
Panorama Maker 3.0 and PhotoPrinter 4.0 are 
trademarks of ArcSoft, Inc.
≥Microsoft
®, Windows®, Windows Messenger® 
and DirectX® are either registered trademarks 
or trademarks of the Microsoft Corporation in 
the United States and/or other countries.
≥Intel
®, Pentium® and Celeron® are the 
registered trademarks...

With a PC
70
ªAbout the SD Memory Card and 
MultiMediaCard
SD Memory Card
The SD Memory Card is virtually the same size as 
a MultiMediaCard. It is an external Memory Card 
that is available in larger capacities. It has a write 
protect switch to prevent data writing and card 
formatting, as well as a copyright protection 
function. 
≥SD Logo is a trademark.
MultiMediaCard
The MultiMediaCard is a compact, lightweight 
and removable external Memory Card.
≥All other company and product names in the...