Panasonic Pv Gs33 Operating Instructions Manual

							Recording Mode
-21-
Recording Mode
About Recording
When recording pictures on a tape, set the Mode 
Dial to Tape Recording Mode [ ].
When recording with the 
[AUTO/MANUAL/FOCUS] Switch 
(44) set to 
[AUTO], the Camcorder automatically adjusts the 
focus and white balance. In some cases, they 
cannot be adjusted automatically and need to be 
adjusted manually. (
-28-,-29-)
≥Before turning on the power, remove the 
Lens Cap. If the Lens Cap is still attached 
when the power is turned on, Automatic 
White Balance Adjustment (
-28-) may not 
function correctly.
≥When the Recording Pause Mode continues for 
more than 5 minutes, the power is turned off 
automatically for tape protection and power 
conservation. (If the AC Adaptor is used, the 
power is turned off only when the tape is 
inserted in Tape Recording Mode.) When the 
tape is inserted in Tape Recording Mode and if 
the Recording Pause Mode continues for more 
than 5 minutes the power is turned off 
automatically. To resume recording from this 
condition, turn off, then turn on the power again.
ªRecording LampThe Recording Lamp (16) lights up during 
recording and alerts those being recorded that 
recording is in progress.
≥The Recording Lamp does not light up if the 
[REC LAMP] on the [INITIAL] Sub-Menu is set 
to [OFF].
AUTO
MANUAL
FOCUS
(44)
(16)
Recording on a Tape
1Set the [OFF/ON] Switch (42) to [ON].
≥The [POWER] Lamp (43) lights up.
2Set the Mode Dial (39) to Tape Recording 
Mode.
3Press the Recording Start/Stop Button (41).
≥Recording starts.
≥After [RECORD] is displayed, it changes to 
[REC].
4Press the Recording Start/Stop Button (41) 
again to pause the recording.
≥The [PAUSE] Indication is displayed.
ªTo Check the RecordingBy pressing the [S] Button (7) briefly in the 
Recording Pause Mode, you can play back the 
last few seconds of the recorded scene.
≥The [CHK] Indication is displayed. After 
checking, the Camcorder resumes the 
Recording Pause Mode.
ONOFF
POWER
(42)
(43)
(39)
(41)
RECORD
REC
PAUSE
PAUSE
S
REC(7)
PV-GS33PP_Eng.book  21 ページ  ２００４年２月２６日　木曜日　午後５時２９分 
						

							
Recording Mode
-22-
ªFinding the End of Recording(Blank Search Function)
The Blank Search Function aids you in locating 
the end of the recording on the Cassette quickly.
1Set [TAPE RECORDING MENU] or 
[TAPE PLAYBACK MENU] >> [INITIAL] >> 
[BLANK SEARCH] >> [YES] .
≥ The [BLANK] Indication appears during the 
Blank Search.
≥ Approximately 1 second before the last 
recorded scene, the Camcorder switches to 
the Recording Pause Mode or the Still 
Playback Mode.
≥ If there is no blank left on the Cassette, the 
Camcorder stops at the end of the tape.
To Cancel Blank Search Before CompletionPress the [ ∫] Button.
ª To Add a Sound while RecordingWith the supplied Magic Wire Remote Control 
with Narration Mic (optional) connected to the 
[REMOTE] Jack 
(30), you can add a narration 
while recording is in progress.
While the [TALK] Button 
(80) is pressed, the [ ] 
Indication is displayed and the sound is recorded 
from [MIC] 
(76).
≥ While the [TALK] Button is pressed, the built-in 
microphone does not operate.
Photoshot
Still pictures can be recorded from the Camcorder 
lens.
1Press the [PHOTO SHOT] Button (35) in the 
Recording Pause Mode.
≥ The Camcorder records a still picture for 
about 7 seconds and then switches back to 
the Recording Pause Mode.
MENU
STILL
ENTERFA D Ei
s
(14)
REC
(76)
(80)
PHOTO SHOT
(35)
≥ If you set [SHTR EFFECT] on the [CAMERA] 
Sub-Menu to [ON], you can add an image and a 
sound like releasing the shutter.
ª Progressive PhotoshotWhen the [ æ] Indication is displayed, 
Progressive Photoshot Function works.
You can record still pictures with higher quality by 
using this function.
≥ The Progressive Photoshot Function may not 
be activated depending on the function you use. 
(
-47-)
ª Continuous PhotoshotIf you set [SHTR EFFECT] on the [CAMERA] 
Sub-Menu to [ON] and keep the [PHOTO SHOT] 
Button pressed, the Camcorder will continuously 
record still pictures in approximately 0.7 seconds 
intervals until the button is released.
≥The screen blinks and, at the same time, a 
shutter clicking sound is recorded.
ª Digital Still PictureWhen the [STILL] Button (9) is pressed, images 
become still pictures. When the button is pressed 
again, the Digital Still Picture Mode is cancelled.
≥ We recommend that you press the [STILL] 
Button first at the position where you wish to 
record the still picture so as to enter the Digital 
Still Picture Mode and then press the 
[PHOTO SHOT] Button.
≥ For other notes concerning this item, see 
-48-.
PHOTO
PHOTOPHOTO
PHOTO
STILL
ENTERFA D Ei
s
(9)
PV-GS33Eng_text.fm  22 ページ  ２００４年２月２７日　金曜日　午後４時３９分 
						

							Recording Mode
-23-
ªRecording YourselfBy opening the LCD Monitor and rotating it 
forward (to the lens side), you can let the subject 
in front of the Camcorder monitor the shot while 
recording is in progress.
≥When the LCD Monitor is opened, the 
Viewfinder is disabled automatically. However, 
when the LCD Monitor is rotated forward, the 
image is also shown in the Viewfinder.
≥If you prefer to have the image on the LCD 
Monitor to look like an image in a mirror, set 
[SELF REC] on the [LCD/EVF] Sub-Menu to 
[MIRROR]. Images are recorded normally and 
no left and right reversal occurs.
Quick Start
By pressing the [QUICK START] Button (40), the 
Camcorder will be ready for recording in 
approximately 1.3 seconds after it is turned on.
1Press the [QUICK START] Button (40).
≥The Quick Start Recording Lamp (40) lights 
up.
2Set the [OFF/ON] Switch (42) to [OFF].
≥The Quick Start Recording Lamp remains lit.
3Set the [OFF/ON] Switch (42) to [ON].
≥The Camcorder will be ready for recording in 
approximately 1.3 seconds.
To Cancel the Quick StartKeep the [QUICK START] Button pressed for 
approximately 2 seconds and make sure the 
Quick Start Recording Lamp is not lit.
≥For other notes concerning this item, see 
-48-.
STARTQUICK
(40)
(40)
ONOFF(42)
Self-timer Recording
When you set the self-timer, the still pictures are 
automatically taken after 10 seconds, on the 
Tape.
1Set [TAPE RECORDING MENU] >> 
[CAMERA] >> [SELF TIMER] >> [ON].
≥The [ ] Indication appears.
2Press the [PHOTO SHOT] Button (35).
≥The Recording Lamp 
(16) and the [ ] 
Indication flash and the recording starts after 
10 seconds.
≥For other notes concerning this item, see 
-48-.
Zoom In/Out Functions
This feature gives special effects to the picture by 
recording objects close by or with wide-angle 
shot.
1For wide-angle shots (zoom out):
Push the [W/T] Lever (36) towards [W].
For close-ups (zoom in):
Push the [W/T] Lever towards [T].
≥Zoom Magnification Indication is displayed for 
a few seconds.
MENU
STILL
ENTERFA D Ei s
(14)
PHOTO SHOT(35)
VOL/JOG
WT(36)
1tW
5tW10tWT T
T
PV-GS33PP_Eng.book  23 ページ  ２００４年２月２６日　木曜日　午後５時２９分 
						

							Recording Mode
-24-
ªTo Take Close-up Shots of Small 
Subjects
(Macro Close-up Function)
When the zoom magnification is 1k, the 
Camcorder can focus on a subject that is as close 
as approximately 1.6 inches (4 cm) from the 
Lens. Small subjects like insects can be recorded 
with this function.
ªTo Use the Tele-Macro FunctionWith the zoom magnification of 10k, the 
Camcorder can bring the subject into focus as 
close as approximately 7.8 inch (20 cm) from the 
Lens. Focusing only on the subject and displaying 
the background out of focus makes the picture 
more impressive.
1Press the [TELE MACRO] Button (5).
≥The zoom magnification is fixed at 10k and 
the subject can be focused on as close as 
7.8 inch (20 cm).
≥The [ ] Indication appears.
2Press the Recording Start/Stop Button (41) 
or the [PHOTO SHOT] Button (35).
To Cancel the Tele-Macro Function
Press the [TELE MACRO] Button.
ªTo Use the Zoom Microphone 
Function
Along with the zooming operation, the 
microphone’s directional angle and sensitivity are 
varied for recording sounds.
≥Set [TAPE RECORDING MENU] >> 
[RECORDING] >> [ZOOM MIC] >> [ON]. (The 
[Z.MIC] Indication is displayed.)
≥For other notes concerning this item, see 
-48-.
TELE
MACRO
(5)
T.MACRO
T.MACROT.MACRO
PHOTO SHOT(35)
(41)
Z.MICZ.MIC
Digital Zoom Function
This function is useful when you want to record 
close-up shots of subjects located beyond a 
normal zoom range of 1k to 10k magnification. 
With the Digital Zoom Function, you can select a 
magnification from 25k up to 700k.
1Set [TAPE RECORDING MENU] >> 
[CAMERA] >> [D.ZOOM] >> [25t] or [700t].
≥25k: Digital zooming to 25k
≥700k: Digital zooming to 700k
2Push the [W/T] Lever (36) towards [W] or 
towards [T] to zoom in or out.
To Cancel the Digital Zoom FunctionSet [TAPE RECORDING MENU] >> [CAMERA] 
>> [D.ZOOM] >> [OFF].
≥For other notes concerning this item, see 
-48-.
Image Stabilizer Function
If the Camcorder is shaken while recording, the 
camera shake in the image can be corrected.
≥If the Camcorder shakes too much, the images 
may not be stabilized.
1Set [TAPE RECORDING MENU] >> 
[CAMERA] >> [EIS] >> [ON].
≥The [EIS] Indication appears.
MENU
STILL
ENTERFA D Ei s
(14)
20tWT
D.ZOOM
VOL/JOG
WT(36)
MENU
STILL
ENTERFA D Ei s
(14)
EIS
PV-GS33PP_Eng.book  24 ページ  ２００４年２月２６日　木曜日　午後５時２９分 
						

							Recording Mode
-25-
2Press the Recording Start/Stop Button (41) 
or [PHOTO SHOT] Button (35) to start 
recording.
To Cancel Image Stabilizer FunctionSet [TAPE RECORDING MENU] >> [CAMERA] 
>> [EIS] >> [OFF].
≥For other notes concerning this item, see 
-48-.
Fade In/Out Functions
Fade In 
Fade In brings out images and sounds gradually 
from a black screen at the beginning of a scene.
1Keep pressing the [FADE] Button (12) 
during the Recording Pause Mode.
≥The image fades out gradually.
2When the image is completely gone, press 
the Recording Start/Stop Button (41) to 
start recording.
3Release the [FADE] Button (12) about 
3 seconds after starting recording.
≥The image reappears gradually.
Fade Out
Fade Out causes images and sounds to 
disappear gradually, leaving a black screen at the 
end of a scene.
PHOTO SHOT(35)
(41)
STILL
ENTERFA D Ei s(12)
(41)
1Keep pressing the [FADE] Button (12) while 
recording.
≥The image fades out gradually.
2When the image is completely gone, press 
the Recording Start/Stop Button (41) to stop 
recording.
3Release the [FADE] Button (12).
≥The still picture cannot fade in or fade out.
Backlight Compensation Function
This prevents the subject from being recorded too 
darkly when backlit. (Backlight is the light that 
shines from behind the subject being recorded.)
1Press the [BACK LIGHT] Button (8).
≥The [ª] Indication flashes and then is 
displayed.
≥The entire screen becomes brighter.
To Resume Normal RecordingPress the [BACK LIGHT] Button.
≥For other notes concerning this item, see 
-48-.
STILL
ENTERFA D Ei s(12)
(41)
BACK
LIGHT(8)
ª
PV-GS33PP_Eng.book  25 ページ  ２００４年２月２６日　木曜日　午後５時２９分 
						

							Recording Mode
-26-
MagicPix Functions
MagicPix Function
This function allows you to record color images 
brightly in a dark place without using the Video 
Flash.
1Press the [MAGICPIX] Button (3) until the 
[MAGICPIX] Indication appears.
0 Lux MagicPix Function
Using the LCD Monitor light, a dark scene of 
almost 0 lux can be recorded.
1Press the [MAGICPIX] Button (3) until the 
[0LUX MAGICPIX] Indication appears.
≥The [REVERSE THE LCD MONITOR] 
Indication appears.
2Rotate the LCD Monitor forward (to the lens 
side).
≥The screen becomes white and the 
Viewfinder turns on.
≥The available range of the LCD Monitor light 
is within approximately 3.9 feet (1.2 meter).
To Cancel the MagicPix FunctionsPress the [MAGICPIX] Button repeatedly until 
neither the [MAGICPIX] Indication nor the 
[0LUX MAGICPIX] Indication appears.
≥For other notes concerning this item, see 
-49-.
MAGIC
PIX
(3)
MAGICPIX
0LUX
MAGICPIXMAGICPIX
Soft Skin Function
This enables you to record skin colors in a softer 
tone. In order to get the best result, avoid 
background colors similar to the skin color of the 
subject. Otherwise, this may result in a softer 
background lacking in detail.
1Press the [SOFT SKIN] Button (4).
≥The [ ] Indication appears.
≥To obtain the best effect, we recommend to 
take a bust shot, so that the upper part from the 
breast of the subject can be framed in the 
screen.
To Cancel the Soft Skin Function
Press the [SOFT SKIN] Button.
Wind Noise Reduction Function
This function reduces the sound of wind hitting 
the microphone when recording.
1Set [TAPE RECORDING MENU] >> 
[RECORDING] >> [WIND CUT] >> [ON].
≥The [WIND CUT] Indication appears.
To Cancel the Wind Noise Reduction Function
Set [TAPE RECORDING MENU] >> 
[RECORDING] >> [WIND CUT] >> [OFF].
≥For other notes concerning this item, see 
-49-.
TELE
MACROSOFT
SKIN(4)
SOFT SKIN
SOFT SKIN
MENU
STILL
ENTERFA D Ei s
(14)
WIND CUT
PV-GS33PP_Eng.book  26 ページ  ２００４年２月２６日　木曜日　午後５時２９分 
						

							Recording Mode
-27-
Cinema Function
This function is for recording a cinema-like image.1Set [TAPE RECORDING MENU] >> 
[RECORDING] >> [CINEMA] >> [ON].
≥Black bars appear at the top and bottom of 
the screen.
To Cancel the Cinema ModeSet [TAPE RECORDING MENU] >> 
[RECORDING] >> [CINEMA] >> [OFF].
≥For other notes concerning this item, see 
-49-. 
Recording in Special Situations
(Program AE)
You can select optimal automatic exposure under 
specific recording situations.
1Set the [AUTO/MANUAL/FOCUS] Switch (44) to [MANUAL].
≥The [MNL] Indication appears.
2Set [TAPE RECORDING MENU] >> 
[CAMERA] >> [PROG.AE] >> a desired 
mode ([5], [7], [4], [Ω] or [º]).
≥The Indication of the selected Mode appears.
MENU
STILL
ENTERFA D Ei s
(14)
CINEMA
AUTO
MANUAL
FOCUS
(44)
MENU
STILL
ENTERFA D Ei s
(14)
1)
3)
2)
4)
5)
1) [5] Sports Mode
≥For recording scenes involving quick 
movements, such as sports scenes.
2) [7] Portrait Mode
≥Use when you want to make people 
(subjects) stand out from the background.
3) [4] Low Light Mode
≥For brightening a dark scene.
4) [Ω] Spotlight Mode
≥For recording a subject under a spotlight.
5) [º] Surf & Snow Mode
≥For recording in glaring surroundings, such 
as ski slopes, beaches, etc.
To Cancel the Program AE Function
Set the [PROG.AE] on the [CAMERA] Sub-menu 
to [OFF]. Or, set the [AUTO/MANUAL/FOCUS] 
Switch to [AUTO].
≥For other notes concerning this item, see 
-49-. 
Recording in Natural Colors
(White Balance)
Depending on the scene or light condition, the 
Automatic White Balance Adjustment Mode may 
not be able to bring out natural colors. In this 
case, the white balance can be adjusted 
manually.
When the Camcorder is turned on with the Lens 
Cap on, the Automatic White Balance Adjustment 
may not function properly. Please turn on the 
Camcorder after removing the Lens Cap.
1Set the [AUTO/MANUAL/FOCUS] Switch (44) to [MANUAL].
≥The [MNL] Indication appears.
2Press the [ENTER] Button (11).
≥The [AWB] Indication appears.
3Press the [5] Button (10) or [6] Button (13) to select a desired White Balance 
Mode.
AUTO
MANUAL
FOCUS
(44)
STILL
ENTERFA D Ei s(11)
1
1
1
1AW B1)
3)2)
4)
PV-GS33PP_Eng.book  27 ページ  ２００４年２月２６日　木曜日　午後５時２９分 
						

							Recording Mode
-28-
1) Automatic White Balance Adjustment [AWB]
2) The white balance setting that was previously 
set manually [1]
3) Outdoor Mode [z]
4) Indoor Mode (recording under incandescent 
lamp) [{]
To Resume Automatic Adjustment
Press the [5] Button (10) or [6] Button (13) 
until the [AWB] Indication appears. Or, set the 
[AUTO/MANUAL/FOCUS] Switch to [AUTO].
Adjusting White Balance Manually
White Balance Adjustment recognizes the color 
of light and adjust so that the white color will 
become pure white. The Camcorder determines 
the hue of light that comes through the Lens and 
White Balance Sensor, thereby judging the 
recording condition, and selects the closest hue 
setting. This function is called Automatic White 
Balance Adjustment.
For light outside the functional Auto White 
Balance Adjustment range, use the Manual White 
Balance Adjustment Mode.
1Set the [AUTO/MANUAL/FOCUS] Switch (44) to [MANUAL].
≥The [MNL] Indication appears.
2Press the [ENTER] Button (11).
≥The [AWB] Indication appears.
3Press the [5] Button (10) or [6] Button (13) until the [1] Indication is displayed.
4Point the Camcorder at a full-screen white 
subject.
5Keep pressing [ENTER] Button (11) until the 
[1] Indication stops flashing.
To Resume Automatic AdjustmentPress the [5] Button (10) or [6] Button (13) 
until the [AWB] Indication is displayed. Or, set the 
[AUTO/MANUAL/FOCUS] Switch to [AUTO].
AUTO
MANUAL
FOCUS
(44)
STILL
ENTERFA D Ei s(11)
MNL
1
ªAbout White Balance SensorThe White Balance Sensor (29) determines the 
nature of the light source during recording. 
≥Do not cover the White Balance Sensor with 
your hand during recording because White 
Balance will not function normally.
≥The red light from the Recording Lamp 
(16) will 
be reflected off your hand or object, possibly 
causing the White Balance sensor to operate 
incorrectly and changing the coloring.
Outside of the effective range of Automatic White 
Balance Adjustment, the image will become 
reddish or bluish. Even within the effective range 
of Automatic White Balance Adjustment, the 
Automatic White Balance Adjustment may not 
function properly if there is more than one light 
source. In this case, adjust the White Balance.
1) The effective range of Automatic White 
Balance Adjustment on this Camcorder
2) Blue sky
3) Cloudy sky (rain)
4) TV screen
5) Sunlight
6) White fluorescent lamp
7) Halogen light bulb
8) Incandescent light bulb
9) Sunrise or sunset
10) Candlelight
≥For other notes concerning this item, see 
-49-. 
(29) (16)
10 000K
9 000K
8 000K
7 000K
6 000K
5 000K
4 000K
3 000K
2 000K
1 000K
2)
1)3)
4)
5)
6)
7)
8)
9)
10)
PV-GS33PP_Eng.book  28 ページ  ２００４年２月２６日　木曜日　午後５時２９分 
						

							Recording Mode
-29-
Manual Shutter Speed Adjustment
Useful for recording fast-moving subjects.1Set the [AUTO/MANUAL/FOCUS] Switch (44) to [MANUAL].
≥The [MNL] Indication appears.
2Press the [ENTER] Button (11) until the 
Shutter Speed Indication appears.
3Press the [5] Button (10) or [6] Button (13) to adjust the shutter speed.
Range of Shutter Speed Adjustment
1/60–1/8000 s
The standard shutter speed is 1/60 s.
Selecting a speed closer to [1/8000] causes the 
shutter speed to be faster.
To Resume Automatic AdjustmentSet the [AUTO/MANUAL/FOCUS] Switch to 
[AUTO].
≥For other notes concerning this item, see 
-49-. 
Manual Iris Adjustment
(F Number)
You can use this function when the screen is too 
bright or too dark.
1Set the [AUTO/MANUAL/FOCUS] Switch (44) to [MANUAL].
≥The [MNL] Indication appears.
2Press the [ENTER] Button (11) until the Iris 
Indication appears.
3Press the [5] Button (10) or [6] Button (13) to adjust the iris.
Range of Iris Adjustment
CLOSE (Closed), F16, ..., F2.0,
OP (Opened)i0dB, ..., OPi18dB
AUTO
MANUAL
FOCUS
(44)
MNL
1/1000STILL
ENTERFA D Ei s(11)
AUTO
MANUAL
FOCUS
(44)
MNL
1/60
F2.0STILL
ENTERFA D Ei s(11)
When a value closer to [CLOSE] is selected, the 
image becomes darker.
When a value closer to [OPi18dB] is selected, 
the image becomes brighter.
The value to which idB is attached indicates a 
Gain-up value. If this value is too large, the quality 
of the image deteriorates.
To Resume Automatic Adjustment
Set the [AUTO/MANUAL/FOCUS] Switch to 
[AUTO].
≥For other notes concerning this item, see 
-50-.
Manual Focus Adjustment
Focus can be adjusted manually for recording in 
a situation where auto focus may not function 
well.
1Set the [AUTO/MANUAL/FOCUS] Switch (44) to [MANUAL].
≥The [MNL] Indication appears.
2Slide the [AUTO/MANUAL/FOCUS] Switch (44) to [FOCUS].
≥The [1MF] Indication (Manual Focus Mode) 
appears.
3Press the [5] Button (10) or [6] Button (13) to adjust the focus.
≥If you keep pressing the [5] Button or [6] 
Button, the speed of adjusting will be faster.
To Resume Automatic AdjustmentSet the [AUTO/MANUAL/FOCUS] Switch to 
[AUTO] or [FOCUS].
AUTO
MANUAL
FOCUS
(44)
AUTO
MANUAL
FOCUS
(44)
MFMNL
STILL
ENTERFA D Ei s
(13)    (10)
PV-GS33PP_Eng.book  29 ページ  ２００４年２月２６日　木曜日　午後５時２９分 
						

							Recording Mode
-30-
Digital Effect Functions
This Camcorder is equipped with Digital Effect 
Functions that add special effects to the scene.
Digital Effects 1 [EFFECT1]
1) Multi Mode [MULTI]
2) Picture-In-Picture Mode [P-IN-P]
3) Wipe Mode [WIPE]
4) Mix Mode [MIX]
5) Strobe Mode [STROBE]
≥Records images with a stroboscopic effect.
6) Trailing Effect Mode [TRAIL]
≥Records images with a trailing effect.
7) Mosaic Mode [MOSAIC]
≥Produces a mosaic-like image.
8) Mirror Mode [MIRROR]
≥The right half of an image becomes a mirror 
image of the left half.
9) Stretch Mode [STRETCH]
≥The picture is expanded horizontally.
10) Slim Mode [SLIM]
≥The picture is expanded vertically.
Digital Effects 2 [EFFECT2]
11) Negative Mode [NEGA]
≥The colors of the recorded image are 
inverted as seen in a negative.
12) Sepia Mode [SEPIA]
≥It records a scene with a brownish tint, like 
the color of old pictures.
13) Black & White Mode [B/W]
3) WIPE
4) MIX
5) STROBE 6) TRAIL
7) MOSAIC 8) MIRROR9) STRETCH
1) MULTI 2) P-IN-P
10) SLIM
11) NEGA12) SEPIA
13) B/W14) SOLARI
≥It records an image in black and white.
14) Solarisation Mode [SOLARI]
≥It records an image with a painting-like 
effect.
To Select a Desired Digital EffectSet [TAPE RECORDING MENU] >> [DIGITAL] 
>> [EFFECT1] or [EFFECT2] >> a desired Digital 
Effect.
To Cancel the Digital EffectSet [TAPE RECORDING MENU] >> [DIGITAL] 
>> [EFFECT1] or [EFFECT2] >> [OFF].
≥If the Camcorder is turned off, the [EFFECT2] 
settings are cancelled.
≥For other notes concerning this item, see 
-50-.
ªMulti-Picture ModeStrobe Multi-Picture Mode:
You can capture and record 9 consecutive small 
still pictures.
Manual Multi-Picture Mode:
You can manually capture and record 9 small still 
pictures.
1Set [TAPE RECORDING MENU] >> 
[DIGITAL] >> [EFFECT1] >> [MULTI].
2Set [TAPE RECORDING MENU] >> 
[DIGITAL] >> [MULTI MODE] >> [STROBE] 
or [MANUAL].
3Press the [MULTI] Button (6).
≥If [MANUAL] is selected, press the [MULTI] 
Button at each scene you want to capture.
MENU
STILL
ENTERFA D Ei s
(14)
MULTI/
P-IN-P
(6)
PV-GS33PP_Eng.book  30 ページ  ２００４年２月２６日　木曜日　午後５時２９分