Panasonic Pv Gs320 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Pv Gs320 Operating Instructions Manual. The Panasonic manuals for Digital Camcorder are available online for free. You can easily download all the documents as PDF.
Page 71
Others 71LSQT1091 off the terminal with a soft cloth and then connect the cable to the A/V terminal. Is a picture containing a copyright protection signal (copy guard) being recorded? When a protected picture is played back by the Camcorder, mosaic-like patterns appear on the picture. Card 1: Recorded pictures are not clear. Have you set [BASIC] >> [PICT.QUALITY] >> [ ]? If recording is done with it set to [ ], pictures with fine details may include a mosaic-like pattern. Set [PICT.QUALITY] >>...
Page 72
Others 72LSQT1091 Cautions for Use ªAbout condensationIf you turn the Camcorder on when condensation occurs on the head or the tape, condensation Indication [3] (yellow or red) is displayed on the viewfinder or the LCD monitor and the messages [3DEW DETECT] or [3EJECT TAPE] (only when the tape is inserted) appear. If so, follow the procedure below. 1Remove the tape if it is inserted.≥It takes about 20 seconds to open the cassette holder. This is not a malfunction. 2Leave the Camcorder with the...
Page 73
Others 73LSQT1091 battery or reconnect AC adaptor and turn the Digital Video Camcorder on. Do not use the Digital Video Camcorder near radio transmitters or high-voltage lines. ≥If you record near radio transmitters or high-voltage lines, the recorded pictures and sound may be adversely affected. Do not spray insecticides or volatile chemicals onto the Camcorder. ≥If the Camcorder is sprayed with such chemicals, the Camcorder body may become deformed and the surface finish may peel off. ≥Do not...
Page 74
Others 74LSQT1091 ªAbout the AC adaptor≥If the battery is warm, charging requires more time than normal. ≥If the temperature of the battery is extremely high or extremely low, the [CHARGE] lamp may continue flashing and the battery may not be charged. After the battery temperature has decreased or increased sufficiently, recharging starts automatically. So, wait for a while. If the lamp still continues flashing even after the recharging, the battery or AC adaptor may be faulty. If so, please...
Page 75
Others 75LSQT1091 ªLCD monitor/viewfinderLCD monitor ≥When the LCD monitor gets dirty, wipe it with a dry soft cloth. ≥In a place with drastic temperature changes, condensation may form on the LCD monitor. Wipe it with soft dry cloth. ≥If your Camcorder is extremely cold, the LCD monitor is slightly darker than usual immediately after you turn the power on. However, as the internal temperature increases, it goes back to normal brightness. Viewfinder ª Periodical check-ups≥To maintain the highest...
Page 76
Others 76LSQT1091 ªWhite balanceThe image recorded by the Camcorder may become bluish or reddish under the influence of light sources. To avoid such phenomena, adjust the white balance. White balance adjustment determines the white color under different light sources. By recognizing which is the white color under sunlight and which is the white color under a fluorescent lamp, the Camcorder can adjust the balance among the other colors. Since white is the reference of all colors (light), the...
Page 77
Others 77LSQT1091 Specifications Digital Video CamcorderInformation for your safety Recording format:Mini DV (Consumer-use digital video SD format) Tape used: 6.35 mm digital video tapeRecording/playback time:SP: 80 min; LP: 120 min (with DVM80) Video Recording system: Digital componentTelevision system:EIA Standard: 525 lines, 60 fields NTSC color signalAudio Recording system: PCM digital recording 16 bit (48 kHz/2 ch), 12 bit (32 kHz/4 ch) Image sensor:1/6-inch 3CCD image sensor [Effective pixels]...
Page 78
Others 78LSQT1091 AC adaptor Information for your safety Dimensions: 61 mm (W) k32 mm (H)k91 mm (D) 2.40 inch (W)k1.26 inch (H)k3.58 inch (D) Mass: Approx. 110g (0.24 lbs) Specifications may change without prior notice. [4:3] mode: ≥¢ is displayed only in Tape Recording Mode. ≥The numbers shown in the table are approximations. ≥These figures vary depending on the subject being photographed. Power source: AC 110V to 240V, 50/60Hz Power consumption: 19 W DC output: DC 7.9 V, 1.4 A (Camcorder operation) DC...
Page 79
Others 79LSQT1091 Camcorder Accessory System *Please refer to page -16-, concerning the battery charging time and available recording time. NOTE: Accessories and/or model numbers may vary by country. Please consult your local dealer. Accessory# *CGA-DU21A/1B PV-DDC9 (For USA) PV-DDC9-K (For Canada) Description 2040 mAh/Rechargeable Lithium Ion Battery Pack DV Interface Cable (4-pin to 4-pin) Figure RP-SDR02GU1A RP-SDR01GU1A RP-SDR512U1A RP-SDR256U1A RP-SDK02GU1A RP-SDH01GU1A RP-SDK512U1A...
Page 80
Others 80LSQT1091 Camcorder Accessory Order Form (For USA Customers) In CANADA, please contact your local Panasonic dealer for more information on Accessories. TO OBTAIN ANY OF OUR PALMCORDER ACCESSORIES YOU CAN DO ANY OF THE FOLLOWING: VISIT YOUR LOCAL PANASONIC DEALER OR CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368 [6 AM-6 PM M-F, PACIFIC TIME] OR MAIL THIS ORDER TO: PANASONIC SERVICES COMPANY ACCESSORY ORDER OFFICE 20421 84th Avenue South Kent, WA. 98032 Ship To: Mr. Mrs....