Panasonic Pv Gs320 Operating Instructions Manual

With a PC
61LSQT1091
≥When Camcorder power is turned OFF.
≥When Mode Dial is turned to change modes.
When using on Macintosh
Drag the [NO_NAME] or [Untitled] disk icon to the 
[Trash] and then disconnect the USB cable.
If you no longer need software or 
driver (Uninstall)
1Select [start] (>> [Settings]) >> 
[Control Panel], select the software or the 
driver from [Add/Remove Programs] to 
uninstall.
≥Uninstalling steps may vary depending on the 
OS. Please refer to the user manual of your OS.
Notes...

With a PC
62LSQT1091
≥If you install the USB driver while the USB cable 
is connected or if you do not follow these 
Operating Instructions, the Camcorder will not 
be recognized correctly. In this case, delete the 
driver from [Device Manager] as described 
below, uninstall the driver and re-install it.
Set the Camcorder to Tape Recording Mode, 
Tape Playback Mode or PC Connection Mode, 
connect it to the personal computer and delete 
[DVC] or [Web-Camera] from [Device Manager].
Depending on your...

Menu
63LSQT1091
Menu
Menu list
Menu figures and illustrations are provided for 
easy-to-understand explanations and so they are 
different from the actual menu indications.
ª
[TAPE RECORDING MENU]
1) [BASIC]
[SCENE MODE] -38-[REC SPEED] -28-[WIND CUT] -36-[ASPECT] -37-[CLOCK SET] -17-
2) [ADVANCED]
[PICT.QUALITY] -32-[PICTURE SIZE] -30-[O.I.S.] -38-[GUIDE LINES] -38-[FADE COLOR] -36-[AUDIO REC] -65-[USB FUNCTION] -55-[D.ZOOM] -33-[ZOOM MIC] -33-
3) [SETUP]
[DISPLAY] -65-[DATE/TIME] -65-[POWER SAVE]...

Menu
64LSQT1091
ª[CARD RECORDING MENU]
1) [BASIC]
[SCENE MODE] -38-[PICT.QUALITY] -32-[PICTURE SIZE] -31-[ASPECT] -37-[CLOCK SET] -17-
2) [ADVANCED]
[O.I.S.] -38-[GUIDE LINES] -38-[SHTR EFFECT] -32-
3) [SETUP]
[DISPLAY] -65-[DATE/TIME] -65-[POWER SAVE] -29-[QUICK START] -19-[REMOTE] -27-[BEEP SOUND] -65-[POWER LCD] -25-[LCD SET] -25-[EVF SET] -25-[INITIAL SET] -65-
4) [LANGUAGE] -24-
ª[CARD PLAYBACK MENU]
1) [BASIC]
[DATE/TIME] -65-[PROTECT] -46-
2) [ADVANCED]
[DPOF SET] -46-[FORMAT CARD] -46-
3)...

Menu
65LSQT1091
Menus related to taking pictures
ª[DATE/TIME]This switches between date and time indications.
≥The Camcorder automatically records the date 
and time the picture was taken on the tape/card.
≥You can also show or change the date/time 
indication by repeatedly pressing the [DATE/
TIME] button on the remote control.
ª
[AUDIO REC]Switches the audio (PCM audio) recording 
systems.
[12bit]: Records audio in “12 bit 32 kHz 4 tracks”. 
(The original audio signals can be kept 
after the other...

Others
66LSQT1091
Others
Indications
Various functions and the Camcorder status are 
shown on the screen.
Basic indications
: Remaining battery power
0h00m00s00f: Time code
3:30:45PM: Date/Time indication
Recording indications
R0:45: Remaining tape time
≥Remaining tape time is indicated in minutes. 
(When it reaches less than 3 minutes, the 
indication starts flashing.) 
SP: Standard Play mode
(Recording speed mode) 
-28-LP: Long Play mode 
(Recording speed mode) -28-¥: Recording -29-; (Green): Recording...

Others
67LSQT1091
≥For images not recorded with this unit, the 
number of horizontal and vertical pixels may 
differ so the image size is not displayed.
Warning/alarm indications
If any one of the following indications lights up or 
flashes, please check the Camcorder.
Confirmatory indicationsY: A cassette with the accidental erasure 
prevention slider placed in the [SAVE] 
position is inserted.
No cassette is inserted.
[--]/0:
The built-in battery is low. 
-17-°: The warning/alarm indication appears...

Others
68LSQT1091
CHANGE MODE TO USE USB: 
The USB cable is connected to the 
Camcorder in Card Recording Mode.
DISCONNECT USB CABLE: 
You are attempting to turn the mode dial in 
PC Connection Mode with the USB cable 
connected to the Camcorder. You are 
attempting to record pictures on a tape/card 
with the USB cable connected to the 
Camcorder.
NO INK IN PRINTER: 
There is no ink. Check the connected 
printer.
NO PAPER IN PRINTER: 
There is no paper. Check the connected 
printer.
PRINTER ERROR: 
Check...

Others
69LSQT1091
Before requesting repair 
(Problems and solutions)
Power/Body
1: The Camcorder power cannot be turned on.
 Is the battery fully charged? Use a fully 
charged battery.
 The battery protection circuit may have 
operated. Attach the battery to the AC adaptor 
for 5 to 10 seconds. If the Camcorder still 
cannot be used, the battery is faulty.
 Is the LCD monitor opened or the viewfinder 
extended?
2: The Camcorder power is turned off 
automatically.
 If you set [POWER SAVE] to [5 MINUTES]...

Others
70LSQT1091
3: A cassette cannot be inserted.
 Has condensation occurred? Wait until the 
condensation indication disappears.
4: Auto focus function does not work.
 Is manual focus mode selected? If auto focus 
mode is selected, focus is automatically 
adjusted.
 There are some recording subjects and 
surroundings for which the auto focus does not 
operate correctly. (
-76-) If so, use the manual 
focus mode to adjust the focus. (-40-)
5: The Camcorder arbitrarily stops recording.
 Is the AGS...