Panasonic Pv Gs320 Operating Instructions Manual

Edit mode
51LSQT1091
3Move the joystick left and right to select a 
desired picture and then press it.
4Select the desired number of prints.
≥You can set up to 9 prints.
5Select the setting for date printing.
≥If the printer is not capable of date printing, 
this setting is unavailable.
6Select [PAPER SIZE].
[STANDARD]:  Size specific to the printer
[4a5 INCH]
[5a7 INCH]
[4a6 INCH]
[A4]
≥You cannot set paper sizes not supported by 
the printer.
7Select [PAGE LAYOUT]. 
[STANDARD]:  Layout set on the...

With a PC
52LSQT1091
With a PC
Check before Use
Available software and required drivers vary 
depending on the OS of the personal computer. 
Check the required software and drivers with the 
table described below and then install them from 
the CD-ROM.
Supplied CD-ROM is available for Windows only.
1) Copying files in the card onto the personal 
computer
≥PC connection mode
2) Capturing pictures on the tape to the 
personal computer
≥Tape recording mode
≥Tape playback mode
3) Recording pictures on the...

With a PC
53LSQT1091
≥MotionDV STUDIO -57-:
Using the MotionDV STUDIO software allows 
you to capture video recorded on a tape or 
images viewed through the lens of a 
Camcorder. Connecting the Camcorder with 
the DV cable also allows you to output 
images edited on the personal computer to 
the tape in the Camcorder.
4Follow the instructions on the computer 
screen until the installation is complete.
≥Setup window will disappear when the 
installation is complete.
Note:
If a window does not appear...

With a PC
54LSQT1091
Using as a Web camera
If the Camcorder is connected to your personal 
computer, you can send video and sound from 
the Camcorder to other parties via the network.
Note:≥Do not connect the USB cable until the USB 
Driver is installed.
Please see chart below:
ªOperating environmentOS:IBM PC/AT compatible personal computer with 
pre-installed;
Microsoft Windows XP Home Edition/ 
Professional SP1 or SP2 °1
Microsoft Windows 2000 Professional SP4
CPU:Intel Pentium III 450 MHz or higher...

With a PC
55LSQT1091
3Set [ADVANCED] >> [USB FUNCTION] >> 
[WEB CAM].
≥To send pictures recorded on a tape to 
another personal computer using Windows 
Live Messenger/Windows Messenger/MSN 
Messenger, set [BASIC] >> 
[USB FUNCTION] >> [WEB CAM] on Tape 
Playback Mode before connecting the 
Camcorder to your personal computer.
When you use the Camcorder as a Web 
camera in the Tape Playback Mode, the 
indication of the operation icon is different 
from the one in usual operation.
1In usual operation
2In...

With a PC
56LSQT1091
5After the setup is completed, sign in and 
start Windows Messenger.
≥Windows Messenger is activated.
6Click on [Audio Tuning Wizard...] in the 
[Tools] menu to confirm that equipment is 
connected correctly.
7Select [USB Video Device] in the [Camera] 
menu.
8Select [DVC] in the [Microphone] menu.
≥Please refer to the HELP file of Windows 
Messenger to understand its operation.
≥During set up, if [Primary video capture 
device] selection screen is displayed, 
[Panasonic DVC Web...

With a PC
57LSQT1091
Using Quick Movie Magic or 
MotionDV STUDIO
When the OS is Windows 2000/XP, the 
Camcorder can be connected to the personal 
computer with the DV cable.
When the OS is Windows 2000/XP, the 
Camcorder can be connected to the personal 
computer with the USB cable. However, when the 
OS is Windows 2000, USB driver must be 
installed.
≥Do not connect the USB cable until the USB 
driver is installed.
ª
Operating environmentOS:IBM PC/AT compatible personal computer with 
pre-installed;...

With a PC
58LSQT1091
ªInstallation of Quick Movie Magic/
MotionDV STUDIO
1
Insert the supplied CD-ROM into the 
personal computer’s CD-ROM drive.
≥Quit all applications.
≥[Setup Menu] appears.
2Click the [Quick Movie Magic]/
[MotionDV STUDIO].
3Click [Next].
≥After reading the displayed contents, please 
carry out the installation according to 
instructions.
4Select the Video system.
5After the completion of setup, click on 
[Finish].
≥Sample data is installed concurrently with the 
Quick Movie...

With a PC
59LSQT1091
≥The indication [Enhanced Host Controller] is 
changed as [EHCI] depending on the host 
controller you use.
4Click [Driver] tab to check the description 
on [Driver Provider].
≥If [Microsoft] is displayed on [Driver Provider], 
the confirmation procedure is completed.
If a description other than [Microsoft] is 
displayed
≥Update the driver with the following procedure.
1Click [Update Driver...].
2Check [Install from a list or specific location 
(Advanced)] and then click [Next]....

With a PC
60LSQT1091
With DV cable (optional)
OS:
Windows 2000/XP1Set the Mode Dial to Tape Recording Mode 
or Tape Playback Mode.
2Connect the Camcorder to the personal 
computer with DV cable.
3Select [start] >> [All Programs (Programs)] 
>> [Panasonic] >> [Quick Movie Magic 1.0E] 
or [MotionDV STUDIO 5.6E LE for DV] >> 
[Quick Movie Magic] or 
[MotionDV STUDIO LE for DV].
≥You can record the video edited by the PC onto 
the tape in the Camcorder.
Using on Macintosh
ªOperating environment on iMovie 4/...