Panasonic Pv Gs120 Operating Instructions Manual

Editing Mode
-51-
Editing Mode
Recording from a Tape onto a Card 
Still pictures or moving pictures can be recorded 
on a Memory Card from scenes that have already 
been recorded on a cassette. (moving pictures on 
PV-GS200 Model only)
1Set the Mode Dial (39) to Tape Playback 
Mode.
2Still Picture:
Start playback and set the Camcorder to 
Still Playback Mode at the scene you wish 
to record, and press the [PHOTO SHOT] 
Button 
(47).
Moving Picture (PV-GS200 only):
Start playback and press the Recording...

Editing Mode
-52-
5To start Audio Dubbing, press the [;] 
Button (76) on the Remote Controller.
To Cancel Audio DubbingPress the [;] Button (76) on the Remote 
Controller.
The Camcorder is in the Still Playback Mode 
again.
To Play Back the Sound Recorded by 12bit 
Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK] 
>> [12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio 
Dubbing.
MIX: It plays back both the original sound and the...

Editing Mode
-53-
Recording the Contents of Other 
Equipment
After connecting the Camcorder and the other 
equipment as illustrated, start the following 
procedures.
1 AV Cable
2 S-Video Cable
Camcorder:
1Set [TAPE PLAYBACK MENU] >> 
[AV IN/OUT] >> [AV JACK] >> [IN/OUT].
2Insert an unrecorded Cassette.
Other Equipment:
3Insert a recorded Cassette and start 
playback.
Camcorder:
4While pressing the [¥REC] Button (61), 
press the [1] Button (79) on the Remote 
Controller.
Or while pressing the [REC] Button...

Editing Mode
-54-
Recorder:3While pressing the [¥REC] Button (61), 
press the [1] Button (79) on the Remote 
Controller.
Or while pressing the [REC] Button 
(7), 
press the [BACK LIGHT] Button (8) on the 
Camcorder.
≥Recording starts.
To Stop DubbingPress the [;] Button (76) or the [∫] Button (77).
≥For other notes concerning this item, see 
-78-.
PC Connection With DV Interface 
Cable
A video clip can be transferred directly to your PC 
(Personal Computer) via a DV Interface Cable 
(optional) using...

Editing Mode
-55-
≥The [PRINT] Indication does not appear when 
the card is not inserted in the Camcorder. (You 
cannot print pictures.)
≥When the [PRINT] Indication keeps blinking 
(more than about 1 minute), the Camcorder and 
the printer are not connected properly. Connect 
the cable again or check the printer.
≥When the Camcorder and the printer are 
connected in the Tape Recording/Playback 
Mode, the [WEB ] or the [WEB ] 
Indication may appear on the LCD Monitor. 
However, images cannot be printed....

With a PC
-56-
With a PC
Using the Software with a Computer
An image stored on the DV Cassette can be 
transferred to your Personal Computer.
ªSoftware Installation (Windows)1Turn on Computer and start up Windows.2Insert supplied CD-ROM into the CD-ROM 
drive.
≥[Setup Menu] appears.
3Select the software to be installed from 
[Setup Menu].
≥USB Driver 
-56-:
Software for USB Driver allows you to 
transfer images directly from the Memory 
Card into the computer.
≥WebCam Driver 
-58-:
If the Camcorder is...

With a PC
-57-
≥Reboot the computer to finish installing USB 
driver.
≥Installation continues after the computer 
reboots if you selected additional software.
≥A message indicating a conflict between 
versions may be displayed during the 
installation. This will not cause a problem. 
Simply click [Yes] to proceed with the 
installation.
≥Depending on the OS version, illustrations and 
icon names may vary.
For Windows 2000 UsersThe conflict message is displayed during 
installation. However, testing by...

With a PC
-58-
Using as a Web Camera
If the Camcorder is connected to your personal 
computer, you can send video and sound from 
the Camcorder to other parties via the network. 
(You can use the microphone equipped with the 
personal computer instead of the one on the 
Camcorder.)
≥Do not connect the USB Cable until the USB 
Driver or WebCam Driver is installed.
This feature can be used only if both parties 
are using the same operating system. Please 
see chart below:
ªOperating environmentOS:
IBM...

With a PC
-59-
ªConnecting the Camcorder to 
Personal Computer (For Use as a Web 
Camera)
1
Install the supplied WebCam Driver on the 
provided CD-ROM.
2Set the Mode Dial to Tape Recording Mode.3Set [CAMERA] >> [USB FUNCTION] >> 
[WEB CAMERA].
≥It enters WEB CAMERA Mode.
≥To send pictures recorded on a tape to 
another personal computer using Windows 
Messenger or MSN Messenger, set 
[PLAYBACK] >> [USB FUNCTION] >> 
[WEB CAMERA] on Tape Playback Mode 
before connecting the Camcorder to your 
personal...

With a PC
-60-
3After the .NET Passport Wizard is 
displayed, click [Next].
≥Please refer to the instruction manual of your 
personal computer for how to configure the 
audio and the microphone.
≥To communicate with persons using 
Windows in other languages, setting up using 
alphabets or numbers is recommended.
4According to the procedures displayed on 
the screen, continue the setup.
5After the setup is completed, sign in and 
start Windows Messenger.
≥Windows Messenger is activated.
6Click on [Audio...