Panasonic Pv Gs120 Operating Instructions Manual

Recording Mode
-41-
1Set [TAPE RECORDING MENU] >> 
[DIGITAL] >> [EFFECT1] >> [WIPE] or [MIX].
≥The [WIPE] or [MIX] Indication appears.
2Press the Recording Start/Stop Button (42) 
to start recording.
3Press the Recording Start/Stop Button (42) 
to pause the recording.
≥The last scene is stored in memory. The 
[WIPE] or [MIX] Indication changes to [B] 
or [C].
4Press the Recording Start/Stop Button (42) 
to restart the recording.
≥The last image of the previous scene 
gradually changes to the new scene....

Playback Mode
-42-
Playback Mode
Playing Back a Tape
The recorded scene can be played back 
immediately after the recording.
1Set the [OFF/ON] Switch (43) to [ON].
≥The [POWER] Lamp (41) lights up.
2Set the Mode Dial (39) to Tape Playback 
Mode.
3Press the [6] Button (19) to rewind the 
tape.
≥Rewind the tape to the point where you want 
to start playback.
≥When the tape reaches the beginning, 
rewinding stops automatically.
4Press the [1] Button (17) to start playback.
≥The [!] Indication appears.
≥If a...

Playback Mode
-43-
ªVariable Speed Search FunctionThe speed of Cue Playback or Review Playback 
can be varied.
1During playback, press the [1] Button (17).
≥The [1k!] Indication appears.
2Push the [sVOL/JOGr] Lever (46) to select 
a desired search speed.
The following 6 playback speeds are available for 
the Variable Speed Search Function in both the 
fast-forwarding and rewinding directions: 
1/5k (slow playback in SP Mode only), 1/3k 
(slow playback in LP Mode only), 1k, 2k, 5k, 
10k and 20k.
≥This...

Playback Mode
-44-
Index Search Functions
To facilitate searching for desired scenes, this 
Camcorder automatically records index signals 
during recording, as explained in the following.
Photoshot Index Signal
These signals are automatically recorded when 
still pictures on a card are recorded to a tape.
Scene Index Signal
Scene Index Signals are automatically recorded 
when you start recording after inserting a 
Cassette.
≥If [SCENE INDEX] of [RECORDING] Sub-Menu 
on the [TAPE RECORDING MENU] is set to...

Playback Mode
-45-
To Change the Enlarging Area of an Image
3Press the Arrow Button (π, ∑, ∏, ∫) (63) 
on the Remote Controller that points to the 
area you want to enlarge.
To Cancel the Playback Zoom FunctionPress the [P.B. ZOOM] Button (81) on the 
Remote Controller.
≥For other notes concerning this item, see 
-75-.
Playback Digital Effect Functions
During playback, special digital effects can be 
added to the recorded pictures. The same effects 
as those of Digital Effects 1 and 2, which are 
used...

Playback Mode
-46-
When you select MPEG4 Playback Mode at 
Step 1 (PV-GS200 only)
≥File is numbered in hexadecimal.
≥When the object is moving fast or zoom 
operation is performed, picture may appear to 
be still or mosaic-pattern noise may appear, but 
this is not a malfunction.
≥When you select MPEG4 Playback Mode at 
step 1, during playback, push the 
[`VOL/JOG_] lever to display the volume 
indication until the volume Indication appears 
and adjust the volume. (
-42-)
1Folder File Number (When the...

Playback Mode
-47-
Creating a Title
You can create a title and record on a Card.1Recording Mode:
Set the Mode Dial (39) to Tape Recording 
Mode or Card Recording Mode. 
Set the Lens to the image you want to use 
for creating a title.
1Tape Playback Mode:
Search for the image you want to use for 
creating a title and set the Camcorder to the 
Still Playback Mode.
2Set [CARD] >> [CREATE TITLE] >> [YES].
3Press the [PHOTO SHOT] Button (47).
≥The title is stored.
≥To perform Photoshot again, select...

Playback Mode
-48-
5Press the [ENTER] Button (17) or press the 
[MULTI] Button (10).
≥The selected title is displayed.
≥Recording and Photoshot Recording can be 
made with pictures that have titles.
≥A title can be displayed also by pushing [TITLE] 
Button on the Remote Controller.
To Clear the Title Display
Set [DIGITAL] >> [TITLE IN] >> [OFF].
Or press [TITLE] Button (73) on the Remote 
Controller.
≥For other notes concerning this item, see 
-77-.
Writing Printing Data on a Card
(DPOF Setting)
DPOF...

Playback Mode
-49-
Deleting the Files Recorded on a 
Card
Using the Camcorder, you can delete the files 
recorded on a Card. After the file is deleted, it 
cannot be restored.
To Select and Delete Files or Titles1Set [PICTURE/MPEG4 PLAYBACK MENU] 
>> [DELETE] >> [FILE BY SEL] >> [YES]. 
([MPEG4 PLAYBACK MENU] on PV-GS200 
Model only)
≥To erase a title in 
[PICTURE PLAYBACK MENU], select 
[TITLE BY SEL].
2Select the file you wish to delete and press 
the [ENTER] Button (17).
≥The selected picture is...

Playback Mode
-50-
Enlarging a Movie Picture Size
(PV-GS200 only)
You can enlarge a Moving Picture to full screen 
size
1Set [MPEG4 PLAYBACK MENU] >> 
[DISPLAY] >> [SCREEN] >> [FULL].
Display specifications in playing back MPEG4 
moving pictures
[NORMAL] display
≥Pictures equal to or smaller than QCIF 
(176k144) are expanded to twice as large as 
the original size.
≥Pictures larger than QCIF pictures (176k144) 
are displayed as large as the original size.
[FULL] screen display
≥Pictures equal to or...