Panasonic Pv Dv73 Operating Instructions Manual

81
PC Connection
Web Camera
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
 “Found New Hardware” is displayed.
 “CONNECT WITH PC” and “WEBCAM” are displayed in the EVF and LCD monitor.
 Position the Palmcorder so that you are in the picture.
 To confirm if the connection between the Palmcorder and PC is correct, please refer
to “Audio Tuning Wizard” on page 86.
 When the Palmcorder and PC (with Windows 2000) are connected via USB, a
message, such as the one below, is...

82For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Web Camera (For Windows XP users)
For Windows Messenger (Windows XP only)
When Windows Messenger is newly installed or when running for the first time, the
following settings become necessary. For more details, please read the corresponding
Help file.
Note
 Once settings are performed, they are not required from the second time the software is
run.
1Turn on your PC.
2Click on “Start,” “All...

83
PC Connection
Web Camera (For Windows XP users)
There are times when a Version Upgrade
screen will be displayed. However, if you
are using Windows Messenger 4.5
or later, there is no need to upgrade.
5Type in your e-mail address and
password.
 You’ll need to get a hotmail address.
If you do not have one, click on
[Get a .NET Passpor t].
Please carefully read the displayed
contents and then proceed.
Note
6Click on [Audio and Video Tuning
Wizard] in the [Tools] menu.
 Select [USB Audio Device] in the...

84For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Web Camera (For Windows XP users)
8The person calling (inviting) side
Double-click a person to call from
those currently [on-line].
 “xxxx-conversation” screen is
displayed.
9The person calling (inviting) side
Click [Start Camera] in the
“xxx-conversation” screen.
 A message inviting the other person
is displayed.
The invited person side
A message asking if the person
accepts or declines is...

85
PC Connection
Web Camera (For Windows 98SE/Me/2000 users)
For MSN Messenger Service and Windows NetMeeting
(Windows 98SE/Me/2000)
When MSN Messenger Service is newly installed or when running for the first time, the
following settings become necessary. For more details, please read the corresponding
Help file.
Note
 Once settings are performed, they are not required from the second time the software is
run.
1Turn on your PC.
2Download the latest version MSN
Messenger Service (4.5 or later) and...

86For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Web Camera (For Windows 98SE/Me/2000 users)
Note
6Click on [Audio Tuning Wizard] in the
[Tools] menu.
 Select [Panasonic USB Microphone]*
in the [Recording] menu.
* If you are using Windows 2000,
select [USB Audio Device] in the
[Recording] menu.
 You can set the volume for playback
or mic volume, etc.
 Also, confirm that the Palmcorder and
PC are connected correctly.
The person you wish to access...

87
PC Connection
9The person calling (inviting) side
Click [Start NetMeeting] in the
“xxx-conversation” screen.
The invited person side
The Instant Message screen appears
and a confirmation message is
displayed. Click on [Accept].
The NetMeeting screen is
automatically opened.
The first time Windows NetMeeting is
run, etc., the Setup screen is
displayed. Please carefully read the
contents and then proceed.
The user information, etc. is input.
Following the directions, please
complete the settings....

88For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Warning Indications
Windows 2000
In Windows 2000, star tup PHOTOVU/
MPEG4 Movie Messenger™ System.
Clicking on [VideoGift] may cause the type
of error to occur to the left. If so, please
perform the following instructions.
Download and install Media Player (7.1 or
later), go to
http://www.microsoft.com/windows/
mediaplayer (current as of Oct. 9, 2002).
 “Windows Media. com: Download” is
opened....

89
PC Connection
Transferring Your  Images  (Macintosh)
You can transfer images from your Palmcorder Memory Card to your Macintosh.
 Mac OS 9.0~9.1
 Mac OS 8.6~9.1 (for ArcSoft Software)
 iMac, iBook or Power Macintosh
® G3 with
USB port or Power Mac™ G4
 RAM: 64 MB or more
 CD-ROM drive (for installation)
System Requirements
(for Built-in SD Drive/ArcSoft Software)
 USB Port
 Mouse or other pointing device
 210 MB minimum available hard disk
space (for ArcSoft Software)
 High color (16 bit) or...

90For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Transferring Your  Images  (Macintosh)
ArcSoft applications Installation
1Turn on the Macintosh.
2Insert the supplied Software
CD-ROM into the CD-ROM Drive.
3Double click the “Panasonic” icon.
Double click the “ArcSoft” Folder.
4Double click the “Panorama Maker
Installer,” “PhotoBase,”
“PhotoImpression,” and
“PhotoPrinter.”
5Follow the instructions as they appear
on your Macintosh section screen. ...