Panasonic Pv Dv202 Operating Instructions Manual

							81
PC Connection
Web Camera
Connection (for Web Camera)
1
A/V Cable
(supplied)
Audio
Adaptor
(supplied)
To MIC Terminal
USB
Terminal
USB Cable (supplied)
AV OUT
USB Terminal
1Turn on your PC.
2Set the Palmcorder POWER to CAMERA.
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
“Found New Hardware Wizard” is displayed.
The following message       is displayed. Even so, functionality confirmation has
been performed at our manufacturer.
Click [Continue Anyway] and proceed.
Follow the instructions as they appear on your PC screen.
“CONNECT WITH PC” and “WEB CAM” are displayed in the EVF and LCD monitor.
A gray box is also displayed. The image within the box can be used with
communication.
Place the Palmcorder so that you are in the picture.
To confirm if the connection between the Palmcorder and PC is correct, please refer
to “Tuning Wizard” on page 84.
When connecting for the first time using Windows XP, the OS installation CD may
be required. Follow the instructions as they appear on your PC screen.
4Go to step 5 on page 82.
For Windows XP users
Note
132
2
Lch
(White)
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
85 
						

							82For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Web Camera
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
“Found New Hardware” is displayed.
“CONNECT WITH PC” and “WEB CAM” are displayed in the EVF and LCD monitor.
A gray box is also displayed. The image within the box can be used with
communication.
Place the Palmcorder so that you are in the picture.
To confirm if the connection between the Palmcorder and PC is correct, please refer
to “Tuning Wizard” on page 84.
When the Palmcorder and PC (with Windows 2000) are connected via USB, a
message, such as the one below, is displayed.
The following message is displayed.
Even so, functionality confirmation has been performed at our  manufacturer.
Click [Yes] and proceed.
4Go to step 5 below.
For Windows 2000 users
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
“CONNECT WITH PC” and “WEB CAM” are displayed in the EVF and LCD monitor.
A gray box is also displayed. The image within the box can be used with
communication.
Place the Palmcorder so that you are in the picture.
To confirm if the connection between the Palmcorder and PC is correct, please refer
to “Tuning Wizard” on page 84.
When connecting for the first time using Windows 98SE or Me, the OS installation
CD may be required.
4Go to step 5 below.
5Connect the A/V Cable (supplied) to the Audio Adaptor (supplied).
For PCs with no built-in mic, connecting the A/V Cable (supplied) to the Audio
Adaptor (supplied), the Palmcorder replaces the mic.
If the speaker and mic are in close proximity, howling may occur.
Do not disconnect the USB Cable while in use.
This could be a source of trouble. For more details, please read the respective Help
file.
For Windows 98SE/Me users
Note
Note
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
86 
						

							83
PC Connection
Web Camera (For Windows XP users)
For Windows Messenger (Windows XP only)
When Windows Messenger is newly installed or when run the first time, the following
settings become necessary. For more details, please read the respective Help file.
Note
Once settings are performed, they are not required from the second time the software is
run.
1Turn on your PC.
2Click on “Start,” “All programs,”
“Windows Messenger.”
“Windows Messenger” screen is
opened.
3Click on [About Windows
Messenger] in the [Help] menu.
Confirm that your version is 4.5 or
newer.
If you have a version older than 4.5,
please download the latest version
(4.5 or newer) from the Microsoft
Home Page:
http://www.microsoft.com/
http://www.msn.com/
For download and installation
instructions, please refer to Help on
the Home Page.
4The first time Windows Messenger is
run, etc., the Setup screen is
displayed.
Click [Click here to sign in].
Please carefully read the contents and
then proceed.
Before you begin
Be sure you have a dial-up connection.
Referring to pages 81~82, connect the Palmcorder and PC.
Confirm that equipment is connected correctly by running the [Audio Tuning Wizard].
(p. 84)
Caution
This feature can be used only if both parties have Windows XP.
For Windows Messenger, please refer to the Microsoft Home Page:
http://www.microsoft.com/
http://www.msn.com/
Note
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
87 
						

							84For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Web Camera (For Windows XP users)
There are times when a Version Upgrade
screen will be displayed. However, if you
are using Windows Messenger 4.5
or newer, there is no need to upgrade.
5Type in your E-mail address and
password.
Yo u’ll need to get a hotmail address.
If you do not have one, click on
[Get a .NET Passpor t].
Please carefully read the displayed
contents and then proceed.
Note
6Click on [Audio Tuning Wizard] in the
[Tools] menu.
You can set the volume for playback
or mic volume, etc.
Also, confirm that the Palmcorder and
PC are connected correctly.
7Select [File] -> [Add a Contact] to
register the person you wish to access
in Windows Messenger.
Please enter the same e-mail
address that the other person has
registered with Windows Messenger.
After registering the e-mail address of
the person you wish to access, click
on [Send E-Mail] and have the person
register your e-mail address as well.
You cannot call a person who is
not signed-on to Windows
Messenger.
The person you wish to access needs to do settings 1~6 also.
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
88 
						

							85
PC Connection
Web Camera (For Windows XP users)
8The person calling (inviting) side
Double-click a person to call from
those currently [on-line].
“xxxx-conversation” screen is
displayed.
9The person calling (inviting) side
Click [Start Camera] in the “xxx-
conversation” screen.
A message inviting the other person
is displayed.
The invited person side
A message asking if the person
accepts or declines is displayed.
Click [Accept] on the screen.
To ignore the invitation, click
[Decline].
10At this point you may proceed with a
voice/video conversation.
For other information about Windows
Messenger, please refer to Help.
11When access is finished, close
Windows Messenger, then set
Palmcorder POWER to OFF.
Finally, disconnect the USB Cable.
Note
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
89 
						

							86For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Web Camera (For Windows 98SE/Me/2000 users)
For MSN Messenger Service and Windows NetMeeting
(Windows 98SE/Me/2000)
When MSN Messenger Service is newly installed or when run the first time, the following
settings become necessary. For more details, please read the respective Help file.
Note
Once settings are performed, they are not required from the second time the software is
run.
1Turn on your PC.
2Download the latest version MSN
Messenger Service (4.5 or newer)
and Windows NetMeeting (3.01 or
newer) from the Microsoft Home Page:
http://www.microsoft.com/
http://www.msn.com/
For download instructions, please
refer to Help on the Home Page.
3Install the MSN Messenger Service.
Follow the instructions on the screen.
4The first time MSN Messenger Service
is run, etc., the Setup screen is
displayed.
Click [Click here to sign in].
Please carefully read the contents and
then proceed.
5Type in your Sign-in name and
password.
Yo u’ll need to get a hotmail address.
If you do not have one, click on
[Get one here].
Please carefully read the displayed
contents and then proceed.
Before you begin
Be sure you have a dial-up connection.
Referring to pages 81~82, connect the Palmcorder and PC.
Confirm that equipment is connected correctly by running the [Audio Tuning Wizard].
(p. 87)
There are times when a Version Upgrade
screen will be displayed. However, if you
are using MSN Messenger Service 4.5
or newer, there is no need to upgrade.
Caution
For MSN Messenger Service and Windows NetMeeting, please refer to the Microsoft
Home Page:
http://www.microsoft.com/
http://www.msn.com/
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
90 
						

							87
PC Connection
Web Camera (For Windows 98SE/Me/2000 users)
Note
6Click on [Audio Tuning Wizard] in the
[Tools] menu.
You can set the volume for playback
or mic volume, etc.
Also, confirm that the Palmcorder and
PC are connected correctly.
The person you wish to access needs to do settings 1~6 also.
7Select [Tools] -> [Add a Contact] to
register the person you wish to access
in MSN Messenger Service.
Please enter the same e-mail
address that the other person has
registered with MSN Messenger
Service.
After registering the e-mail address of
the person you wish to access, click
on [Send E-Mail] and have the person
register your e-mail address as well.
You cannot call a person who is
not signed-on to MSN Messenger
Service.
8The person calling (inviting) side
Double-click a person to call from
those currently [on-line].
“xxxx-conversation” screen is
displayed.
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
91 
						

							88For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
9The person calling (inviting) side
Click [Start NetMeeting] in the “xxx-
conversation” screen.
The invited person side
The Instant Message screen appears
and a confirmation message is
displayed. Click on [Accept].
The NetMeeting screen is
automatically opened.
The first time Windows NetMeeting is
run, etc., the Setup screen is
displayed. Please carefully read the
contents and then proceed.
The user information, etc. is input.
Following the directions, please
complete the settings.
10Click on [Options] in the [Tools] menu
to confirm Video Camera Properties.
If Video is not recognized in Video
Camera Properties, select Control
Panel, System, Device Manager, and
finally Image Device for confirmation.
11The invited person side
A message asking if the person
accepts or declines is displayed.
Click [Accept] on the screen.
To ignore the invitation, click
[Decline].
12The person calling (inviting) side
“Incoming-Call” screen is displayed.
Click on [Accept].
13The invited person side
The person calling (inviting) side
The real-time live picture displayed in
the video camera is displayed on both
yours and the other person’s window
screen.
If the picture is not displayed, click
 several times on the screen.
For other information about MSN
Messenger Service and Windows
NetMeeting, please refer to Help.
14When access is finished, close MSN
Messenger Service and Windows
NetMeeting, then set Palmcorder
POWER to OFF.
Finally, disconnect the USB Cable.
Note
Web Camera (For Windows 98SE/Me/2000 users)
Note
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
92 
						

							89
PC Connection
Warning Indications
Windows 2000
In Windows 2000, startup PHOTOVU/
MPEG4 Movie Messenger™ System.
Clicking on [VideoGift] may cause the
following type of error to occur. If so, please
perfor m the following instructions.
Download and install Media Player (7.1 or
newer), go to
http://www.microsoft.com/windows/
mediaplayer (current as of Dec. 28, 2001).
“Windows Media. com: Download” is
opened.
Click [Download Now!] on the screen.
The “File Download” screen is displayed.
Then, follow the instructions on the
screen.
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
93 
						

							90For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Transferring Your  Images  (Macintosh)
You can transfer images from your Palmcorder tape to your Macintosh.
Mac OS 9.0~9.1
Mac OS 8.6~9.1 (for ArcSoft Software)
iMac, iBook or Power Macintosh
® G3 with
USB port or Power Mac™ G4
RAM: 64 MB or more
CD-ROM drive (for installation)
System Requirements
(for Built-in SD Drive/ArcSoft Software)
USB Port
Mouse or other pointing device
210 MB minimum available hard disk
space (for ArcSoft Software)
High color (16 bit) or more (for ArcSoft
Software)
* Even if system requirements are met, there is no guarantee that the included software
will work on all personal computers.
Connection
3
2
USB Terminal
USB Terminal
1Turn on your PC.
2Set the Palmcorder POWER to M-CARD.
3Connect the Palmcorder to your Macintosh using the USB Cable (supplied).
For extended use, it is recommended to use the AC Adaptor as a power source.
USB Cable
(supplied)
Note
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
94