Panasonic Pv Dv202 Operating Instructions Manual

							51
Card Features
Card Features
3M-DEL
M-STOP You can delete unwanted images and
increase the remaining image memory.
Warning:Once deleted, images cannot be restored.
DELETE PAGE
Delete specific images from a page.
DELETE ALL
Delete all images. (p. 52)
FORMAT
Delete all data. (p. 53)
2M-PLAY
While deleting image, DO NOT turn off
the Palmcorder or unplug the AC
Adaptor (supplied) because this
will cause irreversible damage to the
memory, resulting in reduced image
storage capacity.
Before you begin
Set POWER to OFF before inserting a
recorded Memory Card. (pp. 48, 49)
1Slide the M-CARD Lock Switch to
unlock, then set POWER to M-CARD.
“PLAY: PUSH PLAY KEY” is
displayed for 10 seconds.
2Press  (M-PLAY) to display the Multi
playback screen.
“PLEASE WAIT” appears on-screen.
3Press  (M-DEL) to display the
DELETE menu, then rotate and press
JOG KEY to select PAGE .
DELETE PAGE menu is displayed.
4Rotate and press JOG KEY to select
and set the image to be deleted.
The selected image is underlined in
pink.
5Rotate JOG KEY to select YES , and
press JOG KEY to delete the selected
image.
To cancel delete, press 
 (M-STOP)
or rotate and press JOG KEY to
select NO.
“PLEASE WAIT” appears on-screen
during deletion.
To delete other images, repeat
steps 4~5.
Delete Specific Images
Warning
1POWER
3, 4, 5JOG KEY
M-CARD
Lock
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
55 
						

							52For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Card Features
1Do steps 1 and 2 on page 51.
2Press  (M-DEL) to display the
DELETE menu. Then, rotate and
press JOG KEY to select ALL .
The screen below is displayed.
To cancel delete, press 
 (M-STOP)
or rotate and press JOG KEY to
select NO.
3Rotate and press JOG KEY to select
 YES .
“PLEASE WAIT” is displayed on the
screen, and then “NO PICTURE” is
displayed.
Press 
 (M-STOP) to return to the
Card PhotoShot REC Mode screen.
(p. 48)
You can delete all images from the Memory
Card easily with this operation.
Warning:Once deleted, images cannot be restored.
2M-DEL
M-STOP
While deleting image, DO NOT turn off
the Digital Video Camcorder or unplug
the AC Adaptor (supplied) because this
will cause irreversible damage to the
memory, resulting in reduced image
storage capacity.
Before you begin
Set POWER to OFF before inserting a
recorded Memory Card. (pp. 48, 49)
Delete All Image Pages
2, 3JOG KEY
Warning
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
56 
						

							53
Card Features
Card Features
1Do steps 1 and 2 on page 51.
2Press  (M-DEL) to display the
DELETE menu, then rotate and press
JOG KEY to select FORMAT .
The screen below is displayed.
To cancel format, press 
 (M-STOP)
or rotate and press JOG KEY to
select NO.
3Rotate and press JOG KEY to select
 YES .
“PLEASE WAIT” is displayed on the
screen as all image data is deleted
from Memory Card. Deletion is
complete when “NO PICTURE” is
displayed.
Press 
 (M-STOP) to return to the
Card PhotoShot REC Mode screen.
(p. 48).
You can easily format your Memory Card
using this operation.
Warning:Formatting permanently removes all image
data.
While deleting image, DO NOT turn off
the Palmcorder or unplug the AC
Adaptor (supplied) because this
will cause irreversible damage to the
memory, resulting in reduced image
storage capacity.
Before you begin
Set POWER to OFF before inserting a
recorded Memory Card. (pp. 48, 49)
Format the Memory Card
Warning
2M-DEL
M-STOP
2, 3JOG KEY
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
57 
						

							54For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Card Features
DPOF Setting
You can select the images to be printed,
the number of prints, and other
print-related information (DPOF setting) on
a Memory Card. “DPOF” stands for Digital
Print Order Format, and since printing data
can be added to images on the Memory
Card, the Memory Card can be used with
any system that provides DPOF.
Before you beginSet POWER to OFF before inserting a
recorded Memory Card. (pp. 48, 49)
1Do steps 1 and 2 on page 51.
2Press MENU to display the CARD
SETTING menu screen.
3Rotate JOG KEY to select DPOF , then
press JOG KEY to select ON.
4Rotate JOG KEY to select VARIABLE ,
then press JOG KEY to select ON.
DPOF SETTING menu screen is
displayed on the screen.
5Rotate and press JOG KEY to select
the picture.
The selected image is underlined in
green.
The cursor moves to “D-000”.
6Rotate and press JOG KEY to set the
number of prints.
The “
” mark is displayed.
The “” mark indicates pictures for
which 1 or more prints have been set.
When printing one each of all the
pictures, select “ALL1”; if not all the
pictures are printed, select “ALL0”.
7Repeat steps 5 and 6 to set the other
pictures.
VARIABLE:
You can select images recorded on the
Memory Card and set the number of prints
desired.
ALL1:
The number of prints recorded on the
Memory Card is collectively set to 1.
ALL0:
The currently set number of prints is set
to 0.
Print mark is based on DPOF (Digital Print Order Format).
3, 4, 5, 6JOG KEY
2MENU
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
58 
						

							55
PC Connection
You can transfer images from your Palmcorder tape to your PC (Personal Computer).
Transferring Your  Images  (Windows)
IBM PC/AT or compatible
Pentium ll Processor: 266 MHz or more
RAM: 64 MB or more
CD-ROM drive (for installation)
Mouse or other pointing device
Windows
 95 (for ArcSoft Software only)/98SE/
Me/2000/XP preinstalled PC with USB port
2 MB minimum available hard disk space
(for Palmcorder USB Device Driver)
15 MB minimum available hard disk space (for
PHOTOVU/MPEG4 Movie Messenger™
System)
10 MB minimum available hard disk space
(for Palmcorder File Converter)
Minimum 120 MB of free hard disk space for
Motion picture transfer from DV tape to PC (for
PHOTOVU/MPEG4 Movie Messenger™
System)235 MB minimum available hard disk space (for
ArcSoft Software)
High color (16 bit) or more (for ArcSoft Software)
Video card that supports 16 bit color at
800 x 600 monitor resolution (for Palmcorder
USB Device Driver, PHOTOVU/MPEG4 Movie
Messenger™ System, and Palmcorder File
Converter)
Microsoft
® Windows Media™ Player 6.4 (for
Windows 2000 users: Microsoft® Windows
Media™ Player 7.1) or newer
(for PHOTOVU/MPEG4 Movie Messenger™
System)
* If Windows Media Player 6.4 (for
Windows 2000 users: Windows Media
Player 7.1) or newer is not installed in your PC,
Please download and install Windows Media
Player from the Microsoft Home Page:
http://www.microsoft.com/
System Requirements (for Palmcorder USB Device Driver/PHOTOVU
MPEG4 Movie Messenger™ System/ArcSoft Software)
Palmcorder USB Device Driver/Web Camera/SD Drive
ArcSoft Software*
Install ArcSoft Software 2002.
PhotoImpression  3.0: Easy-to-use photo editing program to edit, enhance, retouch
or add special effects to any image. Also offers creative
solutions for making greeting cards, and calendars.
Panorama Maker 3.0: Easy-to-use photo-stitching program seamlessly combines
multiple photos into a single panoramic picture.
PhotoPrinter 2000 Pro: Program to layout images in multiple sizes quickly and
effortlessly to create a collage or photo album, all on one
page.
PhotoBase 3.0: Create albums of image, video, audio, and other electronic
files for easy viewing, retrieval, and management.
You can edit still picture using the software. Install Palmcorder USB Device Driver.
You can transfer motion/still picture to your PC using Movie Messenger, Web Camera or
SD Drive via USB. Using this driver allows data communication between the Memory
Card and PC.
PHOTOVU/MPEG4 Movie Messenger™ System
Install PHOTOVU/MPEG4 Movie Messenger™ System.
You can transfer motion/still picture to your PC from DV tape via USB and i.LINK.
Palmcorder File Converter
Install File Converter.
You can convert the JPEG data of your PC into the DCF (Design rule for Camera File
System) data, and transfer this data to your Palmcorder via USB. Using this driver allows
data communication between the Memory Card and PC.
* For information on ArcSoft Software:
TEL : 1-510-440-9901 Web Site : www.arcsoft.com
FAX : 1-510-440-1270 E-mail : [email protected]
*Satisfy the conditions recommended by Microsoft for Windows XP.
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
59 
						

							56For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Caution
Software Installation (Windows 95 (for ArcSoft Software only/
98SE/Me/2000/XP)
Please install Palmcorder USB Device Driver first before connecting the Palmcorder and
your PC using USB Cable. Once Palmcorder USB Device Driver is installed, you must
restart your computer for installation to take effect.
Restarting the computer not only applies to Driver installation, but must be done
whenever “Restarting Windows” is displayed after software or driver install/uninstall.
1Turn on the PC (Personal Computer) and start up Windows.
2Insert the supplied Software CD-ROM into the CD-ROM drive.
3Click the icon you want to install. Please install the Palmcorder USB Device Driver
first and follow the instructions listed under “Caution”.
4Follow the instructions as they appear on your PC screen.Palmcorder USB Device Driver
For Movie Messenger
For Web Camera
For SD Drive : Click
PHOTOVU/MPEG4 Movie
Messenger™ System : Click
Palmcorder File Converter : Click
ArcSoft Software : Click
If a window does not appear automatically, click the “Start” button on your desktop and
then click “Run”. When the Run box is open, type in “D:\InstMenu.exe” where “D:” is the
drive letter of your CD; then click “OK”.
If you attempt to install the next Software before the previous Software installation is
completed, “Error” may appear. In this case, click [OK] and install the next Software from
the menu.
Note
Transferring Your  Images  (Windows)
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
60 
						

							57
PC Connection
Notes on PHOTOVU/MPEG4 Movie Messenger™ System operation
For PHOTOVU/MPEG4 Movie Messenger™ System, do not connect the i.LINK and
USB terminals to the Palmcorder at the same time.
Make sure Palmcorder power is not shut off during use as your PC system may become
unstable. Therefore, the AC Adaptor should be used as the power source. (Be
especially careful when recording in M-CARD or CAMERA mode as the power
eventually shuts off automatically if a tape is inserted.)
For PHOTOVU/MPEG4 Movie Messenger™ System, if the play, stop, fast forward,
and rewind functions are operated using the Palmcorder buttons, the image may not be
captured properly. Use Palmcorder Operation Buttons displayed on the PC screen.
Uninstalling Application Software
1Click “Start,” “Settings,” and
“Control Panel.”
2Double-click on “Add/Remove
Programs” in the “Control Panel.”
3Select the application software you
want to remove, and then click [Add/
Remove].
Transferring Your  Images  (Windows)
[ This screen is an example (Windows 2000) ]
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
61 
						

							58For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
PHOTOVU/MPEG4 Movie Messenger™ System
3
2
USB TerminalUSB Terminal
1Turn on your PC.
2Set the Palmcorder POWER to VCR.
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
“CAPTURE” appears in the EVF or the LCD monitor.
The “Found New Hardware Wizard” screen of Windows is displayed.
The following message       is displayed. Even so, functionality confirmation has
been performed at our manufacturer.
Click [Continue Anyway] and proceed.
Follow the instructions as they appear on your PC screen.
USB Cable
(supplied)
Connection (for PHOTOVU/MPEG4 Movie Messenger™ System)
For Windows XP users
Note
For extended use, the AC Adaptor should be used as a power source.
132
2
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
62 
						

							59
PC Connection
PHOTOVU/MPEG4 Movie Messenger™ System
For Windows 2000 users
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
“CAPTURE” appears in the EVF or the LCD monitor.
The “Found New Hardware” screen of Windows is displayed.
When the Palmcorder and PC (with Windows 2000) are connected via USB, a
message, such as the one below, is displayed.
The following message is displayed. Even so, functionality confirmation has
been performed at our manufacturer.
Click [Yes] and proceed.
For Windows 98SE/Me users
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
“CAPTURE” appears in the EVF or the LCD monitor.
Note
For extended use, the AC Adaptor should be used as a power source.
Note
For extended use, the AC Adaptor should be used as a power source.
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
63 
						

							60For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Running the PHOTOVU/
MPGE4 Movie Messenger™
System*Before you beginInsert a recorded tape. (p. 11)
*PHOTOVU: You can transfer Still images
from your Palmcorder tape to a PC.
MPEG4 Movie Messenger™ System:
You can transfer Motion images from your
Palmcorder tape to a PC.
1Set Palmcorder POWER to VCR.
2Connect the Palmcorder to your PC
using the USB Cable (supplied) or
DV interface Cable (i.LINK) (not
supplied). (pp. 58, 59, 72)
3Click on “Start,” “(All) Programs,”
“Panasonic,” “MPEG4
MovieMessenger System 1.00,” then
“MovieMessenger.”
4“PHOTOVU/MPEG4 MovieMessenger
System 1.00” is opened.
Refer to Help for information about
application operations and Error
messages.
ASet Palmcorder POWER to VCR.
BConnect the Palmcorder to your PC
using the USB Cable (supplied) or
DV interface Cable (i.LINK).
CStart up the PHOTOVU/MPEG4
Movie Messenger™ System.
While PHOTOVU/MPEG4 Movie Messenger™ System is running,
do not perform the following operations...
The PC system may become unstable.
Change the screen area or color pallet in the Display Properties window.
Turn the Palmcorder power switch ON or OFF while connecting the Palmcorder to your
PC using the USB Cable or DV Interface Cable (i.LINK).
Change the Palmcorder power switch (VCR/CAMERA).
*You must first close the application.
Connect/disconnect the DV Interface Cable (i.LINK).
Connect/disconnect the USB Cable.
How to insert the USB Cable or
DV Interface Cable (i.LINK)
AClose the PHOTOVU/MPEG4 Movie
Messenger™ System.
BRemove the USB Cable or DV
Interface Cable (i.LINK) from the
Palmcorder.
CSet Palmcorder POWER to OFF.
How to remove the USB Cable
or DV Interface Cable (i.LINK)
Note
PHOTOVU/MPEG4 Movie Messenger™ System
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
64