Panasonic Projector Pt L780ntu Specifications

41
Basic Operation
Select the item pressing the For G
buttons on the remote control unit or
the projector.
Press the Ior Hbuttons, to adjust
the alternative items. For the
numerically adjustable items, press
the ENTER button to display an
individual screen, and press the I
or Hbuttons to adjust the setting.
Some items can be adjusted
pressing the For Gbuttons.
Adjusting the position
When the input signal is RGB, first
press the AUTO SETUP button to
initiate automatic positioning. 
If the optimum setting...

42
NOTE:
BIf you press the AUTO SETUP button
after correcting the keystone distortion
manually, the automatic keystone
correction function will operate and the
corrected picture will return to its
previous incorrect condition. In addition,
if you change the input signal and press
the AUTO SETUP button, the keystone
correction may be cancelled depending
on the type of signal and the angle of tilt
of the projector. To prevent them from
happening, you can set 
“AUTO
KEYSTONE ” in the OPTION menu
to  “OFF ”...

43
Basic Operation
S4:3
The size of the input signal is
compressed to 75% and projected.
(This is useful for projecting a
picture with a 4:3 aspect ratio onto a
16:9 screen.)
When a 4:3
signal is being
input
[
AUTO
(S-VIDEO only)
When an S1 video signal is input to
the S-VIDEO terminal, the aspect
ratio is changed automatically to
project a 16:9 picture.
4:3
The input signal is projected without
change.
16:9
The picture is compressed to a ratio
of 16:9 and projected.
When a
squeezed
signal is being...

44
NOTE:
BS1 video signals
S1 video signals are a type of video
signal with an aspect ratio of 16:9
which include a detector signal. This
detector signal is output by some
sources such as wide-vision video
decks. If the AUTO setting above is
selected, this projector will recognise
the detector signal and automatically
switch the aspect ratio to 16:9 in
order to project the picture.
BThis projector is equipped with an
aspect ratio selection function.
However, if a mode which does
not match the aspect...

45
Basic Operation
Audio adjustment
Select the items by pressing the F
or Gbuttons on the remote control
unit or the projector.VOLUME
Press the Ior Hbuttons to adjust
the volume of the sound output by
the projector’s built-in speakers. 
MUTE
Set the MUTE to “ON” pressing the
Ior Hbuttons to turn off the
volume of the sound output.
To release muting, set to “OFF”
pressing the Ior Hbuttons.
AUDIOVOLUME
MUTE OFFON 20
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
Changing the display language
Use the...

46
Select the item pressing the For G
buttons on the remote control unit or
the projector.
Press the Ior Hbuttons to adjust
the selective items. To make the 
SHUTTER or WEB PASSWORD
(PT-L780NTU only) functions work,
press the ENTER button.
SHUTTER
The shutter function can be used to
momentarily turn off the picture and
sound from the projector when the
projector is not being used for short
periods of time, such as during
breaks in meetings or when carrying
out preparation. The projector uses
less power...

47
Advanced OperationAdvanced OperationAdvanced Operation
BACK COLOR
This sets the colour which is
projected onto the screen when no
signal is being input to the projector.
FRONT/REAR
This setting should be changed in
accordance with the projector
setting-up method.
Set to “FRONT ” when using a
normal reflective screen with the
projector positioned in front of the
screen, and set to  “REAR ” when
using a translucent screen with the
projector positioned behind the
screen.
DESK/CEILING
This setting should...

48
WEB PASSWORD
(PT-L780NTU only)
You can set the password for
controlling the projector with a
personal computer by means of a
wireless or wired network using an
optional wireless or projector LAN
card. Use the For G buttons to
change the characters, and use the
I or H buttons to change the
character position. When finished,
press the ENTER button. The
projector comes from the factory
without any password.
If password setting is complete, the
password will not be displayed on
the WEB PASSWORD screen....

49
Advanced Operation
NETWORK SETUP (PT-L780NTU only)
You need make adjustment on some items when controlling the projector
with a personal computer by means of the wireless or wired network, usin\
g
an optional wireless card or projector LAN card. Refer to the accessory \
CD-
ROM for details.
NETWORKSTATUS
WEP \bAN1
KEY1
SE\bECT:[^][@]
Ð
T¦á§¦à§\
ENTER:[ENTER]
ESC:[MENU]
SD CARDAUTOP\bAY
REPEAT
INTERVA\b O\f\f
ON
1 5 sec
SE\bECT:[^][@]
ADJUST:[{][}] ENTER:[ENTER]
ESC:[MENU]
STATUS
This setting...

Zoom/Focus adjustment
Press the ENTER button to display
the individual adjustment screen.
Press the Ior Hbuttons  to adjust
the projected image size.
Press the For Gbuttons to adjust
the projected image focus.
The projected image focus or zoom
can also be adjusted by pressing
the FOCUS +/- or ZOOM +/- buttons
on the projector. To make fine
adjustments to the projected image
focus, use the FOCUS +/- buttons.
50
Lens adjustment
Select an item by pressing the For Gbuttons on the remote control unit or
the...