Panasonic Projector PT-DW11KU User Manual

							Chapter 6 Appendix — Specifications
ENGLISH - 181
 rApplicable scanning frequency
Refer to “List of compatible signals” ( x   page   175) for the types of video signals that can be used with the projector .
For video signal
(including Y/C signal)Horizontal: 15.75
  kHz/15.63   kHz, Vertical: 50   Hz/60   Hz
For RGB signal Horizontal: 15
  kHz to 100   kHz, Vertical: 24   Hz to 120   Hz
PIAS (Panasonic Intelligent Auto Scanning) system
 f Dot clock frequency: 162

  MHz or less
For YC
BCR/YPBPR signal
 f 525i (480i)
Horizontal: 15.75
   kHz, Vertical: 60   Hz
 f
525p (480p)
Horizontal: 31.5
   kHz, Vertical: 60   Hz
 f
750 (720)/60p
Horizontal: 45
   kHz, Vertical: 60   Hz
 f
1
 125 (1035)/60i
Horizontal: 33.75   kHz, Vertical: 60   Hz f
1 125 (1080)/50i
Horizontal: 28.13   kHz, Vertical: 50   Hz
 f1

125 (1080)/24sF
Horizontal: 27
  kHz, Vertical: 48   Hz
 f1

125 (1080)/30p
Horizontal: 33.75
  kHz, Vertical: 30   Hz
 f1

125 (1080)/50p
Horizontal: 56.25
  kHz, Vertical: 50   Hz
 f625i (576i)
Horizontal: 15.63
   kHz, Vertical: 50   Hz
 f
625p (576p)
Horizontal: 31.25
   kHz, Vertical: 50   Hz
 f
750 (720)/50p
Horizontal: 37.5
   kHz, Vertical: 50   Hz
 f
1
 125 (1080)/60i
Horizontal: 33.75   kHz, Vertical: 60   Hz f
1 125 (1080)/24p
Horizontal: 27   kHz, Vertical: 24   Hz
 f1

125 (1080)/25p
Horizontal: 28.13
  kHz, Vertical: 25   Hz
 f1

125 (1080)/60p
Horizontal: 67.5
  kHz, Vertical: 60   Hz
 fThe SYNC/HD and VD terminals do not support 3 value SYNC.
For DVI

-
D signal 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 
 
1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,  
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,  
1125 (1080)/60p, 1125 (1080)/50p
 f Displayable resolution: VGA

 to WUXGA (non-interlaced)
 fDot clock frequency: 25

  MHz to 162   MHz
For HDMI signal 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 
 
1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,  
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,  
1125 (1080)/60p, 1125 (1080)/50p
 f Displayable resolution: VGA

 to WUXGA (non-interlaced)
 fDot clock frequency: 25

  MHz to 162   MHz
For SDI signal
(Only for PT
-

DZ13KU, 
PT
-

DS12KU, PT
-

DZ10KU) SD
- SDI signal SMPTE ST 259 compliant
YC
BCR 4:2:2 10-bit
480i, 576i
Single link HD
-
SDI signal SMPTE ST 292 compliant
YP
BPR 4:2:2 10-bit
720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 
1080/24p, 1080/24sF
, 1080/30p
Dual link HD
-
SDI signal
*1SMPTE ST 372 compliant
RGB 4:4:4 12 - bit/10 - bit
1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
X'Y'Z' 4:4:4 12
- bit
2048
  x   1080/24p, 2048   x   1080/24sF
3G
-
SDI signal SMPTE ST 424 compliant
YP
BPR 4:2:2 10-bit
1080/50p, 1080/60p
RGB 4:4:4 12
- bit/10 - bit
1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
 f The 3G

-
SDI signal is only compatible with SDI1.
*1 Only for PT- DZ13KU, PT- DS12KU  
						

							Chapter 6 Appendix — Specifications
182 - ENGLISH
 rTerminal
 terminal 1 set (BNC x 5 (RGB/YP
BPR/YCBCR/YC x 1))
RGB signal 0.7
 
V [p-p] 75   Ω (SYNC ON GREEN: 1.0   V [p-p] 75   Ω)
SYNC/HD TTL high impedance, automatic positive/negative 
polarity compatible
VD TTL high impedance, automatic positive/negative 
polarity compatible
YP
BPR signal Y: 1.0   V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
Y/C signal Y
: 1.0
 
V [p-p], C: 0.286
 
V [p-p] 75
 
Ω
 terminal 1 set, high-density D
-
Sub 15
 
p (female)
RGB signal 0.7
 
V [p-p] 75
 
Ω (SYNC ON GREEN: 1.0
 
V [p-p] 75
 
Ω)
SYNC/HD TTL high impedance, automatic positive/negative 
polarity compatible
VD TTL high impedance, automatic positive/negative 
polarity compatible
YP
BPR signal Y: 1.0   V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
 terminal 1 set, DVI
-
D 24
 
p, single link, DVI 1.0 compliant, HDCP compatible
 terminal 1 set, HDMI 19 pin, HDCP compatible, Deep Color compatible
 terminal 1 set, BNC 1.0
 
V [p-p] 75
 
Ω
 terminal (Only for 
PT
-

DZ13KU, PT
-

DS12KU)
 terminal (Only for 
PT
-

DZ10KU) 1 set (BNC)
SD
-
SDI signal SMPTE ST 259 compliant
HD
-
SDI signal SMPTE ST 292 compliant
3G
-
SDI signal SMPTE ST 424 compliant
Dual link HD
-
SDI 
(LINK
-
A) signal
*1SMPTE ST 372 compliant
 terminal
(Only for PT
-

DZ13KU, 
PT
-

DS12KU) 1 set (BNC)
SD
-
SDI signal SMPTE ST 259 compliant
HD
-
SDI signal SMPTE ST 292 compliant
Dual link HD
-
SDI 
(LINK
-
B) signal SMPTE ST 372 compliant
 terminal
(Only for PT
-

DZ13KU, 
PT
-

DS12KU, PT
-

DW11KU) 1 set (BNC)
During input setting TTL high impedance
During output setting TTL output: Maximum 10
  mA
 terminal
(Only for PT
-

DZ13KU, 
PT
-

DS12KU, PT
-

DW11KU) 1 set (BNC)
TTL output: Maximum 10
 
mA
/  
terminal D
-
Sub 9
 
p, 1 set each, RS
-
232C compliant, for computer control
/  terminal M3 stereo mini jack cable, 1 set each, for remote control (wired)/projector connection control
 terminal 1 set, D
-
Sub 9
 
p, for contact control
 terminal 1 set, RJ
-
45, for network connection, PJLink compatible, 10Base - T/100Base - TX
*1 Only for PT-DZ13KU, PT- DS12KU
Note
 fThe model numbers of accessories and optional components are subject to change without prior notice.  
						

							Chapter 6 Appendix — Dimensions
ENGLISH - 183
Dimensions
Unit: mm
540 (21-1/4)
200 (7-7/8) 8.5 (11/32)
100 (3-15/16)
462 (18-3/16)
26 (1-1/32)
530 (20-7/8) 468 (18-7/16)
* Actual dimensions may differ depending on the product.  
						

							Chapter 6 Appendix — Precautions for Ceiling Mount Bracket for Projectors
184 - ENGLISH
Precautions for Ceiling Mount Bracket for Projectors
 fWhen installing the projector to a ceiling, be sure to use the specified optional Ceiling Mount Bracket for Projectors (Model No.: 
ET-
PKD310H (for High Ceilings), ET- PKD310S (for Low Ceilings), ET- PAD310 (Projector ceiling mount bracket)).
 fWhen installing the projector

, attach the drop-prevention kit included with the Ceiling Mount Bracket for Projectors.
 fAsk a qualified technician to do the installation work such as mounting the projector on the ceiling.
 fPanasonic takes no responsibility for any damage to the projector result\
ing from use of a ceiling mount bracket not manufactured by 
Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector has not expired.
 fUnused products must be removed promptly by a qualified technician.
 fUse a torque screwdriver or 

Allen torque wrench to tighten bolts to their specified tightening torques. Do not use electric screwdrivers or 
impact screwdrivers.
 f Read the Installation Instructions for the Ceiling Mount Bracket for Pro\
jectors for details.
 fThe model numbers of accessories and optional accessories are subject to change without prior notice.


M6
16 mm (5/8)
Bottom view
Model No. of Ceiling Mount Bracket for Projectors: ET-PKD310H (for High Ceilings) ET-PKD310S (for Low Ceilings)
ET-PAD310 (Projector ceiling mount bracket)
Torque: 4 ± 0.5 N·m  
						

							Index
ENGLISH - 185
0 – 9 [3D COLOR MATCHING]    93
[3D FRAME DELA
Y]
     94
[3D INPUT
 FORMAT]
     92
[3D PICTURE BALANCE]
     93
[3D SAFETY
 PRECAUTIONS]
     95
[3D SETTINGS]
     68,   91
[3D SIMUL INPUT SETTING]
     92
[3D SYNC SETTING]
     91
[3D SYSTEM SETTING]
     91
[3D TEST
 MODE]
     94
[3D TEST
 PATTERN]
     95
AAccessories     20
 terminal
     26,   52
Adjusting adjustable feet
     45
[ADV
ANCED MENU]
     67,   85
Air filter unit
     157
Air filter unit compartment
     159
[ASPECT]
     79
 button Remote control
    
 24,   63
Aspect function
     6 3
Attaching/removing the projection lens
     4 6
Automatic setup function
     6 2
[AUT
O SETUP]
     9 8
 button
Projector body
    
 26,   62
Remote control
     24,   62
[AUTO SIGNAL]
     9 8
B[BACK COLOR]    103
[BLANKING]
     8 5
[BRIGHTNESS]
     72
[BRIGHTNESS CONTROL]
     111
CCautions on use      1 8
Cautions when installing
     1 6
Cautions when transporting
     1 6
Ceiling Mount Bracket for Projectors
     184
[CLAMP
 POSITION]
     8 6
[CLOCK PHASE]
     8 1
[COLOR]
     72
[COLOR MA
TCHING]
     9 6
[COLOR TEMPERA
TURE]
     72
Connecting the power cord
     52
Connecting to the projector with a cable
     29
Connection
     4 8
[CONTRAST]
     71
[CONTROL
 DEVICE PASSWORD CHANGE]
     133
[CONTROL
 DEVICE SETUP]
     132
[COOLING CONDITION]
     109
Crestron RoomV
iew
     136,   151
[CUT OFF]
     107
D[DARK TIME SETTING]    94
[DA
TE AND TIME]
     121
 button
Remote control
    
 24,   66
Deleting the registered signal
     128
[DIGIT
AL CINEMA REALITY]
     8 5
Dimensions
     183
Display language
     68,   90
[DISPLAY OPTION]
     68,   96
[DISPLAY SETTING]
     132
Disposal
     1 8
 button Projector body
    
 26,   62
Remote control
     24
[DVI-D IN]
     100
[DYNAMIC IRIS]
     7 6
E[EDGE BLENDING]    8 7
 button Projector body
    
 2 6
Remote control
     24
Expanding signal lock-in range
     129
FFilter indicator    155
 button Remote control
    
 24,   56
[FRAME LOCK]
     8 9
[FRAME RESPONSE]
     8 8 [FREEZE]  
  
 105
 button Remote control
    
 24,   63
Function button
     6 3
[FUNCTION BUTT
ON]
     121
G[GAMMA]    74
[GEOMETR
Y]
     8 1
H button
Projector body     26,   62
Remote control
     24,   62
[HDMI IN]
     100
[HIGH 
ALTITUDE  MODE]
     109
I  button
Remote control     24,   28
 button Remote control
    
 24,   28
[INITIALIZE]
     124
Initial setting
     22
[INPUT
 RESOLUTION]
     8 6
Installation mode
     31
K[KEYSTONE]    8 4
LLamp indicator      155
[LAMP
 POWER]
     111
[LAMP
 RELAY]
     11 0
[LAMP
 SELECT]
     109
Lamp unit cover
     25
[LARGE SCREEN CORRECTION]
     97
[LEFT/RIGHT
 SWAP]
     93
 button Projector body
    
 2 6
[LENS CALIBRA
TION]
     122
[LENS MEMOR
Y]
     122
 button Remote control
    
 24
List of compatible signals
     175
[LOAD 
ALL USER DATA]
     124
 button Remote control
    
 24
MMain menu    6 6
Main power switch
     26,   53
Maintenance
     157
 button Projector body
    
 26,   65
Remote control
     24,   65
Menu item
     6 7
NNavigating through the menu     6 5
[NETWORK]
     70, 135
Network connections
     136
[NETWORK CONTROL]
     135
[NETWORK SETUP]
     135
[NETWORK ST
ATUS]
     136
[NOISE REDUCTION]
     7 6
[NO SIGNAL
 SHUT-OFF]
     120
O button
Remote control     24,   61
[ON-SCREEN DISPLAY]
     102
On-screen menu
     6 5
Optional accessories
     21
P[PICTURE]    67,   71
[PICTURE MODE]
     71
[P
 IN P]
     69,   125
P IN P function
     125
[POSITION]
     67,   79
Power cord
     52
Power indicator 
     52
Power on button Projector body
    
 2 6
Remote control
     24
Power standby button Projector body
    
 2 6
Remote control
     24 Precautions for Ceiling Mount Bracket for 
Projectors
 
   184
Precautions for use
    1 6
Projecting
    5 6
[PROJECTION METHOD]
     108
Projector body
    25
[PROJECT
OR ID]
    108
[PROJECT
OR SETUP]
     69,   108
Protecting the registered signal
     129
R[RASTER POSITION]    8 9
Read this first!
    2
Registering new signals
    128
 terminal
    27
 terminal
     27
 terminal
     173
[REMOTE2 MODE]
    120
Remote control
    24
Remote control operations
    6 1
Renaming the registered signal
     128
Replacing the air filter unit
     159
Replacing the lamp unit
    159
Replacing the unit
    159
Resetting to the factory default
     6 6
 button Projector body
 
   26,   62
Remote control
    24,   62
 button Projector body
 
   26,   62
Remote control
    24,   62
[RGB IN]
    99
RoomV
iew
    151
[RS-232C]
    118,   169
S[SAFETY PRECAUTIONS MESSAGE]    95
[SA
VE ALL USER DATA]
    124
[SCHEDULE]
    11 6
[SCREEN SETTING]
    97
 button Projector body
 
   26,   62
Remote control
    24,   62
[SDI IN]
    100
Security
    1 8
[SECURITY]
    69,   131
[SECURITY PASSWORD]
     131
[SECURITY
 PASSWORD CHANGE]
     131
Selecting the input signal
    5 6
 terminal
    169
 terminal
    169
[SER
VICE PASSWORD]
    124
Setting remote control ID numbers
     2 8
Setting up
    31
[SHARPNESS]
    75
[SHIFT]
    79
 button Remote control
 
   24,   56
 button Projector body
 
   26,   61
Remote control
    24,   61
[SHUTTER SETTING]
    105
[SIGNAL
 LIST]
    69,   128
Specifications
    180
sRGB-compliant video
    7 8
[ST
ANDBY MODE]
    11 5
[ST
ARTUP INPUT SELECT]
     11 7
[ST
ARTUP LOGO]
    104
[ST
ATUS]
    11 9
 button
Remote control
 
   24,   62
Sub memory
    130
Switching of
f the projector
    55
Switching on the projector
    53
Switching the input signal
    6 2
[SYSTEM DA
YLIGHT VIEW]
     75
[SYSTEM SELECT
OR]
    77
TTemperature indicator    155
 button Remote control
 
   24,   63
[TEST PATTERN]
    69,   127
[TEXT CHANGE]
    132
[TINT]
    72
T
roubleshooting
    163
T
wo window
    174
Index   
						

							Index
186 - ENGLISH
U[UNIFORMITY]    104
Upgrade Kit
     175
V button
Projector body     26,   62
Remote control
     24,   62
W[WAVEFORM MONITOR]    105
Z[ZOOM]     8 0
 button Remote control
    
 24,   56   
						

							Panasonic System Communications Company of North America
One Panasonic Way 2F-13, Secaucus, NJ 07094
TEL: (877) 803 - 8492
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
TEL: (905) 624 - 5010
Panasonic Corporation
Web Site : http://panasonic.net/avc/projector/
© Panasonic Corporation 2013
W0513HM0 -YI
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the 
correct method of disposal.
Environment care information for users in China
This symbol is only valid in China.