Panasonic Projector PT-DW11KU User Manual

							Chapter 4 Settings — [SECURITY] menu
ENGLISH - 131
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fWhen the projector is used for the first time
Initial password: Press  awsqawsq in order

, and press the  button.
 fAfter selecting the item, press 

asqw to set.
Attention
 fWhen you select the [SECURITY] menu and press the  button, entering a password is required. Enter the preset password and 
then continue operations of the [SECURITY] menu.
 fWhen the password has been changed previously

, enter the changed password, and press the  button.
Note
 fThe entered password is displayed with*marks on the screen.
 fAn error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
[SECURITY PASSWORD]
The [SECURITY PASSWORD] screen is displayed when the power is turned on. When the entered password is incorrect, the operation will be 
restricted to the power standby < v> button, the  button, and the  (, , and ) buttons.
1) Press as to select [SECURITY PASSWORD].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Disables the security password entry.
[ON] Enables the security password entry.
Note
 fThe [SECURITY  PASSWORD] setting is set to [OFF] by the factory default or when [ALL USER DATA] in [INITIALIZE] ( x   page   124) is 
executed.
 f Change the password periodically that is hard to guess. fThe security password is enabled after setting [SECURITY

 PASSWORD] to [ON] and turning the  switch to .
[SECURITY PASSWORD CHANGE]
Change the security password.
1) Press as to select [SECURITY PASSWORD CHANGE].
2)  
Press the  button.
 f The  [SECURITY PASSWORD CHANGE] screen is displayed.
3) Press  asqw and the number ( - ) buttons to set the password.
 fUp to eight button operations can be set.
4) Press the  button.
5)  
Re-enter the password for the confirmation.
6)

 
Press the  button.
Note
 f The entered password is displayed with*marks on the screen. fAn error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.   
						

							Chapter 4 Settings — [SECURITY] menu
132 - ENGLISH
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1) Press as to select [DISPLAY SETTING].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] The text display is disabled.
[TEXT] The text display is enabled.
[USER LOGO] Displays the image registered by the user.
Note
 fTo create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[TEXT CHANGE]
Change the text displayed when the text display is enabled by selecting [TEXT] in [DISPLA Y SETTING].
1) Press as to select [TEXT CHANGE].
2)  
Press the  button.
 f The  [TEXT CHANGE] screen is displayed.
3) Press  asqw to select the text, and press the  button to enter the text.
4)  
Press 
 asqw to select [OK], and press the  button.
 fThe text is changed.
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote\
 control.
1) Press  as to select [CONTROL DEVICE SETUP].
2)  
Press the  button.
 f The  [CONTROL DEVICE SETUP] screen is displayed.
3) Press  as to select [CONTROL PANEL] or [REMOTE CONTROL].
[CONTROL PANEL] You can set the limitation on the control from the control panel.
[REMOTE CONTROL] You can set the limitation on the control from the remote control.
4) Press the  button.
 fThe  [CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.
5) Press  as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)  
Press 
 qw to switch the item.
 fYou can set the operation restriction from the control panel or the remot\
e control.
[ENABLE] Enables all button operations.
[DISABLE] Disables all button operations.
[USER] Operation of all buttons can be enabled/disabled separately.
Refer to “Enabling/disabling any button” (
x
  page   132) for details.
7) Press as to select [APPLY], and press the  button.
 fThe confirmation screen is displayed.
8) Press  qw to select [OK], and press the  button.
Enabling/disabling any button
1) Press as to select [CONTROL DEVICE SETUP].   
						

							Chapter 4 Settings — [SECURITY] menu
ENGLISH - 133
2) Press the  button.
 fThe  [CONTROL DEVICE SETUP] screen is displayed.
3) Press  as to select [CONTROL PANEL] or [REMOTE CONTROL].
4)  
Press the  button.
5)

 
Press 
 as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
 
Press 
 qw to switch [USER].
7)
 
Press 
 as to select the button item to set.
 fWhen [INPUT  SELECT BUTTON] is selected, press the  button, and then press as to select the button to set.
Buttons that can be set
[CONTROL PANEL] [REMOTE CONTROL]
[POWER BUTTON] Power standby  button, power on  button
[INPUT SELECT BUTTON]  button,  button,  button,  button,  but\
ton, and  
button
*1
[MENU BUTTON]
 button
[LENS BUTTON]  button  button,  button,  
button
[AUTO SETUP BUTTON]  button
[SHUTTER BUTTON]  button
[ASPECT BUTTON] — button
[ON SCREEN BUTTON] — button
[OTHER BUTTON] asqw,  button Buttons not listed above
*1 Only for PT-
DZ13KU, PT- DS12KU, PT- DZ10KU
8) Press qw to switch the item.
[ENABLE] Enables button operations.
[DISABLE] Disables button operations.
 fThe following items are available when [SDI1/2 BUTT

ON] is selected in [INPUT SELECT BUTTON] in PT
-
 DZ13KU and PT
-
 DS12KU.
[TOGGLE]Switches between SDI1 and SDI2 when the button is operated.
[SDI1] Fixes to SDI1.
[SDI2] Fixes to SDI2.
[DISABLE] Disables button operations.
 fWhen [INPUT

 SELECT BUTTON] is selected in Step 7), press the  button to return to the [CONTROL PANEL] screen or the 
[REMOTE CONTROL] screen.
9) Press  as to select [APPLY], and press the  button.
 fThe confirmation screen is displayed.
10) Press  qw to select [OK], and press the  button.
Note
 f When a button operation is performed on the device set to [DISABLE], the\
  [CONTROL  DEVICE PASSWORD] screen is displayed.
Enter the control device password.
 f The 

[CONTROL DEVICE PASSWORD] screen will disappear when there is no operation for approx. 10 seconds.
 fIf the operations of both [CONTROL

 PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot 
enter standby).
 f When the setting has completed, the menu screen will disappear

. To operate continuously, press the  button to display the main 
menu.
 f Even when button operation on the remote control is disabled, the  button and the  button are enabled.
[CONTROL DEVICE PASSWORD CHANGE]
The control device password can be changed.
1) Press as to select [CONTROL DEVICE PASSWORD CHANGE].
2)  
Press the  button.
 f The  [CONTROL DEVICE PASSWORD CHANGE]  screen is displayed.
3) Press asqw to select the text, and press the  button to enter the text.   
						

							Chapter 4 Settings — [SECURITY] menu
134 - ENGLISH
4) Press asqw to select [OK], and press the  button.
 fTo cancel, select [CANCEL].
Attention
 fThe initial password is “AAAA” by the factory default or when [ALL  USER DA TA] in [INITIALIZE] (x   page   124) is executed. fChange the password periodically that is hard to guess.   
						

							Chapter 4 Settings — [NETWORK] menu
ENGLISH - 135
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[NETWORK SETUP]
Perform the initial setting of the network before using the network function.
1) Press  as to select [NETWORK SETUP].
2)  
Press the  button.
 f The  [NETWORK SETUP] screen is displayed.
3) Press  as to select an item, and change the settings according to the operation i\
nstructions of the 
menu.
[PROJECTOR NAME] Change the setting when using a DHCP server.
[DHCP] Set to [ON] when obtaining an IP address automatically using a DHCP server. Set to [OFF] when not 
using a DHCP server.
[IP ADDRESS] Enter the IP address when not using a DHCP server.
[SUBNET MASK] Enter the subnet mask when not using a DHCP server.
[DEFAULT GATEWAY] Enter the default gateway address when not using a DHCP server.
[STORE] Save the current network settings.
4) Press as to select [STORE], and press the  button.
5)  
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
Note
 f When using a DHCP  server, confirm that the DHCP server is running. fConsult your network administrator regarding the IP
 address, subnet mask, and default gateway.
[NETWORK CONTROL]
Set up the control method of the network.
1) Press as to select [NETWORK CONTROL].
2)  
Press the  button.
 f The  [NETWORK CONTROL] screen is displayed.
3) Press  as to select an item, and press qw to change the setting.
[WEB CONTROL] Set to [ON] to control with the web browser.
[PJLink CONTROL] Set to [ON] to control with the PJLink protocol.
[COMMAND CONTROL] Set to [ON] to control with the / terminal control command format 
(x
  page   172). Refer to “Control commands via LAN” ( x
  page   167).
[COMMAND PORT] Set the port number used for command control.
[CRESTRON RoomView] Set to [ON] to control with RoomView of Crestron Electronics, Inc.
[AMX D.D.] Set to [ON] to control with the controller of AMX Corporation.
Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, refer to 
the website of AMX Corporation.
URL http://www.amx.com/
[STORE] Save the current network control settings.   
						

							Chapter 4 Settings — [NETWORK] menu
136 - ENGLISH
4) Press as to select [STORE], and press the  button.
5)  
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
[NETWORK STATUS]
Display the status of the projector network.
1) Press as to select [NETWORK STATUS].
2)  
Press the  button.
 f The  [NETWORK STATUS] screen is displayed.
Network connections
The projector has a network function, and the following operations are available from the computer using the web control.
 fSetting and adjustment of the projector
 fDisplay of the projector status
 fSending of E-mail messages when there is a problem with the projector
The projector supports “Crestron RoomV

iew”, and the following application software of Crestron Electronics, Inc. can be used.
 fRoomV

iew Express
 fFusion R

V
 fRoomV

iew Server Edition
Attention
 fWhen a LAN cable is directly connected to the projector , the network connection must be made indoors.
Note
 f“Crestron RoomV iew” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systems 
connected to a network using a computer.
 f For details of “Crestron RoomV

iew”, refer to the website of Crestron Electronics, Inc. (English only)
URL http://www.crestron.com
To download “RoomView Express”, go to the following website of Crestron Electronics, Inc. (English only)
URL http://www.crestron.com/getroomview
 f A

 LAN cable is required to use the network function.
 rExample of a normal network connection
SDI 1/2
Computer
Projector
LAN cable (straight) LAN cable (straight) Hub
 fA web browser is required to use this function. Confirm that the web browser can be used beforehand.
Compatible OS: Windows XP/Windows Vista/Windows 7/Windows 8, Mac OS   X   v10.4/v10.5/v10.6/v10.7/v10.8
Compatible browser: Internet Explorer 7.0/8.0/9.0/10.0, Safari 4.0/5.0/6.0 (Mac OS)
 f Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand.
 fUse a LAN cable that is compatible with category 5 or higher

.
 fUse a LAN cable of 100

  m (328'1") or shorter.   
						

							Chapter 4 Settings — [NETWORK] menu
ENGLISH - 137
Name and function of network function parts
3 2
1
1 LAN LINK/ACT lamp (green)
Lights on when connected.
Flashes when transmitting/receiving data.
2
 
 terminal (10Base
 - T/100Base - TX)
Used to connect the LAN cable here.
3
 
LAN10/100 lamp (yellow)
Lights on when connected to the 100Base

- TX.
Accessing from the web browser
1) Start up the web browser on the computer .
2)  
Enter the IP
  address set on the projector into the URL entry field of the web browser.
3)
 
Enter the user name and the password.
 f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lower 
case).
4) Click OK.
 fThe [Projector status] page is displayed.   
						

							Chapter 4 Settings — [NETWORK] menu
138 - ENGLISH
Note
 fIf you use a web browser to control the projector , set [WEB CONTROL] to [ON] in [NETWORK CONTROL] ( x   page   135). fDo not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple 
computers.
 fChange the password first. ( x

  page   150)
 fThe administrator rights allow use of all functions. 

The user rights allow use of [Projector status] (x   page   139), confirmation of the error 
information page ( x
  page   140), [Network status] (x   page   141), [Basic control] (x   page   142), and [Change password] (x
  page   150) 
only.
 f Access will be locked for few minutes when an incorrect password is entered three times consecutively . fSome items on the projector setting page use the Javascript function of the web browser . 

The projector may not be able to be controlled 
properly if it is set with a browser that does not have this function enabled.
 f If the screen for the web control is not displayed, consult your network administrator . fWhile updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction.
Descriptions of items
1
2
3
4
5
6
1 Page tab
Switches pages by clicking this item.
2
 
[Status]
The status of the projector is displayed by clicking this item.
3

 
[Projector control]
The [Projector control] page is displayed by clicking this item. 4

 [Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5
 
[Change password]
The [Change password] page is displayed by clicking this item.
6

 
[CRESTRON RoomV
 iew]
The control page of RoomView is displayed by clicking this item.   
						

							Chapter 4 Settings — [NETWORK] menu
ENGLISH - 139
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
14
15
166
7
8
9
1
2
3
4
17 10
5
11
12
13
1 [PROJECTOR TYPE]
Displays the type of the projector.
2
 
[MAIN VERSION]
Displays the firmware version of the projector

.
3
 
[POWER]
Displays the status of the power

.
4
 
[SHUTTER]
Displays the status of the shutter (ON: closed, OFF: open).
5

 
[LAMP
  SELECT]
Displays the setting status of [LAMP SELECT] (x
  page   109).
6
 
[SERIAL
  NUMBER]
Displays the serial number of the projector.
7
 
[NETWORK VERSION]
Displays the version of the firmware of the network.
8

 
[REMOTE2 ST
 ATUS]
Displays the control status of the  terminal.
9
 
[OSD]
Displays the status of the on-screen display

.10
 [LAMP  POWER]
Displays the setting status of [LAMP POWER] (x   page   111).
11
 [INPUT]
Displays the status of the selected input.
12

 
[INT
 AKE AIR TEMPERATURE]
Displays the status of the air intake temperature of the projector.
13
 
[OPTICS MODULE TEMPERA
 TURE]
Displays the status of the internal temperature of the projector.
14
 
[AROUND LAMP
  TEMPERATURE]
Displays the status of the temperature around the lamp of the 
projector.
15
 
[LAMP1][LAMP2][RUNTIME]
Displays the status and the runtime (converted value) of the 
lamp.
16

 
[SELF TEST]
Displays the self-diagnosis information.
17

 
[PROJECT
 OR RUNTIME]
Displays the runtime of the projector.   
						

							Chapter 4 Settings — [NETWORK] menu
140 - ENGLISH
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the 
error/warning details.
 f The projector may go into the standby status to protect the projector de\
pending on the contents of the error

.
1
1 Self-diagnosis result display
Displays the item check results.
[OK]:
Indicates that operation is normal.
[F
AILED]:
Indicates that there is a problem.
[WARNING]:
Indicates that there is a warning.
 r [FAILED] items displayed when a problem occurs
Parameter Description
[MAIN CPU BUS] There is a problem with the microcomputer circuitry. Consult your dealer.
[FAN] There is a problem with the fan or the fan drive circuit. Consult your dealer .
[INTAKE AIR TEMPERATURE] The air intake temperature is too high. The projector may be used in an operating 
environment where the temperature is high, such as near a heating appliance.
[OPTICS MODULE TEMPERATURE] The temperature around the optics module inside the projector is high. The projector 
may be used in an operating environment where the temperature is high, such as near a 
heating appliance.
[AROUND LAMP TEMPERATURE] The temperature around the lamp is high. The air exhaust port may be blocked.
[LAMP1 REMAIN TIME] The runtime of the lamp has exceeded the specified time, and it is time to replace the 
lamp.
[LAMP2 REMAIN TIME]
[LAMP1 STATUS] The lamp has failed to turn on. Wait a while until the luminous lamp cools off, and then 
turn on the power.
[LAMP2 STATUS]
[APERTURE(CONTRAST-SHUTTER)] There is a problem in the contrast shutter circuit for dynamic iris. Con\
sult your dealer.
[INTAKE AIR TEMP.SENSOR] There is a problem with the sensor used to detect intake temperature. Consult your 
dealer.
[OPTICS MODULE TEMP.SENSOR] There is a problem with the sensor used to detect temperature inside the projector
. 
Consult your dealer.
[AROUND LAMP TEMP. SENSOR] There is a problem with the sensor used to detect exhaust air temperature. Consult your 
dealer.
[BATTERY] Battery replacement is required. Consult your dealer.
[LENS MOUNTER] There is a problem in the lens mounter. Consult your dealer.
[COVER OPEN] Installation of the lamp unit cover is incomplete. Check the installatio\
n of the lamp unit 
cover. (x
  page   161)
[BRIGHTNESS SENSOR] There is a problem with the luminance sensor. If problems persist even after switching 
on the power, consult your dealer.
[ANGLE SENSOR] There is a problem with the sensor that detects angle. Consult your dealer .
[FILTER UNIT] The air filter unit is not attached. Check the connection of the air filter unit. 
(x
  page   157)
[AIR FILTER] There is too much dust accumulated in the air filter unit. Turn the  
switch  (
x
  page   55), and clean the air filter. (x   page   157)
[AC POWER] AC input voltage is weak. Use electric wiring that can sufficiently withstand the power 
consumption of the projector.