Panasonic Projector PT-DW11KU User Manual

Chapter 4 Settings — [POSITION] menu
ENGLISH - 81
When [ASPECT] is set to [DEFAULT]
1) Press as to select [ZOOM].
2)  
Press the  button.
 f The  [ZOOM]  screen is displayed.
3) Press  as to select [MODE].
4)  
Press 
 qw to switch the item.
[INTERNAL] Enlarges the size within the aspect range set with [SCREEN FORMA T].
[FULL] Enlarges or reduces the size using the entire display area set with [SCREEN FORMA T].
5) Press as to select [INTERLOCKED].
6)  
Press 
 qw to switch the item.
[OFF] Sets the...

Chapter 4 Settings — [POSITION] menu
82 - ENGLISH
[PC-1]*1
Uses the computer to perform geometric adjustment.
[PC
-
2]*1
[PC-3]*1
*1 Advanced skills are necessary to use a computer to control geometric adj\
ustment. Consult your dealer . Up to three geometric adjustments 
performed using the computer can be saved.
Setting [KEYSTONE] or [CURVED]
1) Press  as to select [GEOMETRY].
2)  
Press 
 qw to select [KEYSTONE] or [CURVED].
3)
 
Press the  button.
 f The  [GEOMETRY:KEYSTONE] or [GEOMETRY:CURVED]...

Chapter 4 Settings — [POSITION] menu
ENGLISH - 83
[CURVED]
[VERTICAL BALANCE]
[HORIZONTAL BALANCE]
[MAINTAIN ASPECT RATIO]
Select [ON] to correct while keeping the aspect ratio.
Setting [CORNER CORRECTION]
1) Press  as to select [GEOMETRY].
2)  
Press 
 qw to select [CORNER CORRECTION].
3)
 
Press the  button.
 f The  [GEOMETRY:CORNER CORRECTION] screen is displayed.
4) Press  as to select the item to adjust, and press the  button.
5)  
Press 
 asqw to adjust.
[CORNER CORRECTION]
[UPPER LEFT]
[UPPER...

Chapter 4 Settings — [POSITION] menu
84 - ENGLISH
[KEYSTONE]
(Only for PT-DW11KU)
You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted.
1) Press  as to select [KEYSTONE].
2)  
Press the  button.
3)

 
Press 
 as to select the item to adjust.
4)
 
Press 
 qw to adjust.
[KEYSTONE] [SUB KEYSTONE]
[LINEARITY]
Note
 fThe menu or logo may run of f the screen when adjustments are performed with [KEYSTONE]. fCorrecting up to ±40° for the tilt...

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 85
[ADVANCED MENU] menu
On the menu screen, select [ADVANCED MENU] from the main menu, and select an item from 
the sub-menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[DIGITAL CINEMA REALITY]
You can increase the vertical resolution and enhance the image quality by performing cinema processing when the PAL (or SECAM) 576i 
signal, the NTSC 480i signal,...

Chapter 4 Settings — [ADVANCED MENU] menu
86 - ENGLISH
Blanking correction Item OperationAdjustmentRange of adjustment
Top of the screen [UPPER] Press the q 
button. The blanking zone 
moves upward.
PT-
DZ13KU, PT- DZ10KU: 
Top to bottom 0 - 599
PT
-

DS12KU: Top to bottom  0 - 524
PT
-

DW11KU: Top to bottom  0 - 383
Press the w 
button. The blanking zone 
moves downward.
Bottom of the  screen [LOWER]Press the w 
button. The blanking zone 
moves upward.
Press the q 
button. The blanking zone 
moves...

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 87
[EDGE BLENDING]
The edge blending function allows multiple projector images to be seamlessly overlapped by using the inclination of the brightness at the 
overlapped area.
1) Press as to select [EDGE BLENDING].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Sets the edge blending function to off.
[ON] Use the setting value of the internal distortion of the set for the incl\
ination of the edge...

Chapter 4 Settings — [ADVANCED MENU] menu
88 - ENGLISH
15) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT] in [BLACK BORDER WIDTH].\
16)  
Press 
 qw to set the region (width) of the [BLACK BORDER WIDTH] adjustment.
 fWhen PT- DZ13KU, PT- DS12KU, or PT- DZ10KU is used, proceed to Step 17).
 fWhen PT-

DW11KU is used, proceed to Step  19).
17) Press as to select [UPPER KEYSTONE AREA], [LOWER KEYSTONE AREA], [LEFT KEYSTONE 
AREA], or [RIGHT KEYSTONE AREA].
18)
 
Press 
 qw to adjust the tilt of...

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 89
[FRAME LOCK]
(Only for PT-DZ13KU, PT- DS12KU, PT- DZ10KU)
Set this to view 3D display when the vertical scanning frequency of the signal is 25   Hz, 50   Hz, and 100   Hz.
1) Press as to select [FRAME LOCK].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Decreases the flickering of the display.
[ON] Synchronizes the display to the vertical scanning frequency of the input signal.
Note
 f[FRAME LOCK]...

Chapter 4 Settings — [DISPLAY LANGUAGE] menu
90 - ENGLISH
[DISPLAY LANGUAGE] menu
On the menu screen, select [DISPLAY LANGUAGE] from the main menu, and display the sub-
menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fPress 

as to select a language, and press the  button to set.
Changing the display language
You can select the language of the on-screen display.
ENTER
INITIAL SETTING
SELECT
SET
 fVarious menus, settings, adjustment screens, control...