Panasonic Projector PT-DW11KU User Manual

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 61
Operating with the remote control
Using the shutter function
If the projector is not used for a certain period of time during the mee\
ting intermission, for example, it is possible to turn off the image 
temporarily.
 button
1) Press the  button.
 f The image disappears.
 fThis operation can be also performed using the  button on the c\
ontrol panel.
2) Press the  button again.
 fThe image is displayed.
Note
 fThe power...

Chapter 3 Basic Operations — Operating with the remote control
62 - ENGLISH
Switching the input signal
The input for projection can be switched.
 button
1) Press the input selection (, , , , , ) buttons.
 fThis operation can be also performed using the buttons on the control pa\
nel.
 Switches the input to RGB1.
 Switches the input to RGB2.
 Switches the input to DVI
- D.
 Switch the input to VIDEO.
 Switch the input to HDMI.

*1
(PT- DZ13KU, PT- DS12KU)
Switches the input to SDI1 or SDI2. Switches to...

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 63
 fThis operation can be also performed using the  button on the control panel.
Note
 fThe clock phase may shift even if it has completed without any incident. In such cases, adjust the [POSITION] menu  →  [CLOCK PHASE] 
(x   page   81).
 fIf an image with blurred edges or a dark image is input, [INCOMPLETE] may appear or adjustment may not be performed properly even 
when [COMPLETE] appears. In this case, adjust the settings in...

64 - ENGLISH
Chapter 4 Settings
This chapter describes the settings and adjustments you can make using t\
he on-screen menu.   

Chapter 4 Settings — Menu navigation
ENGLISH - 65
Menu navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 button
1) Press the  button on the remote control or control panel.
 fThe  [MAIN MENU] screen is displayed.
ENTER
MAIN MENUPICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION 3D SETTINGS
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
P IN P
2) Press  as...

Chapter 4 Settings — Menu navigation
66 - ENGLISH
4) Press as to select a sub-menu, and press qw or the  button to change or adjust settings.
 fSome items will switch in order as follows each time you press  qw .
ABC
 fFor some items, press  qw to display an individual adjustment screen with a bar scale as shown below .
0CONTRAST
ADJUST
Note
 fPressing the  button while the menu screen is displayed returns to the previous menu. fSome items may not be adjusted or used for certain signal formats to be \...

Chapter 4 Settings — Menu navigation
ENGLISH - 67
Main menu itemPage
[PROJECTOR SETUP] 108
[P IN P]125
[TEST PATTERN]127
[SIGNAL LIST]128
[SECURITY]131
[NETWORK]135
*1 Only for PT-DZ13KU, PT- DS12KU, PT- DW11KU
Sub-menu
The sub-menu of the selected main menu item is displayed, and you can se\
t and adjust items in the sub-menu.
[PICTURE] 
Sub-menu item Factory defaultPage
[PICTURE MODE] [STANDARD]
*171
[CONTRAST] [0]71
[BRIGHTNESS] [0]72
[COLOR] [0]72
[TINT] [0]72
[COLOR TEMPERATURE] [DEFAULT]72
[GAMMA]...

Chapter 4 Settings — Menu navigation
68 - ENGLISH
Sub-menu itemFactory defaultPage
[CLAMP POSITION] [24]
*186
[EDGE BLENDING] [OFF]87
[FRAME RESPONSE] [NORMAL]88
[FRAME LOCK]
*2[OFF] 89
[RASTER POSITION] ―89
*1 Depends on the signal input.
*2  Only for PT- DZ13KU, PT- DS12KU, PT- DZ10KU
Note
 fSub-menu items and factory default settings dif fer depending on the selected input terminal.
[DISPLAY LANGUAGE] 
Details (x page 90)
[3D SETTINGS] 
(Only for PT-DZ13KU, PT- DS12KU, PT- DW11KU)
Sub-menu item...

Chapter 4 Settings — Menu navigation
ENGLISH - 69
[PROJECTOR SETUP] 
Sub-menu itemFactory defaultPage
[PROJECTOR ID] [ALL]108
[PROJECTION METHOD] [FRONT/FLOOR]108
[COOLING CONDITION] [AUTO]109
[HIGH ALTITUDE  MODE] [OFF]109
[LAMP SELECT] [DUAL]109
[LAMP RELAY] [OFF]11 0
[LAMP POWER] [HIGH]
*1111
[BRIGHTNESS CONTROL] ―111
[STANDBY MODE] [NORMAL]11 5
[SCHEDULE] [OFF]11 6
[STARTUP INPUT SELECT] [LAST USED]11 7
[RS-232C] ―11 8
[STATUS] ―11 9
[NO SIGNAL SHUT-OFF] [DISABLE]120
[REMOTE2 MODE] [DEFAULT]120...

Chapter 4 Settings — Menu navigation
70 - ENGLISH
[NETWORK] 
Sub-menu itemFactory defaultPage
[NETWORK SETUP] ―135
[NETWORK CONTROL] ―135
[NETWORK STATUS] ―136
Note
 fSome items may not be adjusted or used for certain signal formats to be \
input to the projector .
The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected.
 f Sub-menu items and factory default settings dif

fer depending on the selected input terminal.