Panasonic Projector PT-DW11KU User Manual

ENGLISH - 51
Chapter 3 Basic Operations
This chapter describes basic operations to start with.  

Chapter 3 Basic Operations — Switching on/off the projector
52 - ENGLISH
Switching on/off the projector
Connecting the power cord
Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily.
Confirm that the  switch is on the  side before connecting the power cord.
For details of power cord handling, refer to “Read this first!” ( x page 2).
Attaching the power cord
1) Check the shapes of the  terminal on the side of the projector bo\
dy and the...

Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 53
Note
 fWhile the power indicator  is lit in orange, the fan is running to cool the projector. fFor about 75 seconds after the projector is switched of
f and the luminous lamp cooling is started, the lamp indicators will not light up even if 
the power is switched on. After the power indicator  lights in red, turn on the power again.
 f The projector consumes power even in standby mode (power indicator  lit in red). Refer to “Power...

Chapter 3 Basic Operations — Switching on/off the projector
54 - ENGLISH
Making adjustments and selections
It is recommended that images are projected continuously for at least 30\
 minutes before the focus is adjusted.
SDI 1/2
VIDEOENTER
MENULENS
SHUTTER
RGB 1
RGB 2AUTOSETUP
DVI-D
HDMI
SDI 1/2
1) 8)5)
6)
3)
7) 9)3)
2)
4) 1) 5) 7) 8) 9)
2)
6)
1) Press the  button to roughly adjust the focus of the image. ( x   page   56)
2)  
Change the settings of the [PROJECT
 OR SETUP] menu → [PROJECTION METHOD] and...

Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 55
Switching off the projector
SDI 1/2
VIDEOENTER
MENULENS
SHUTTER
RGB 1
RGB 2AUTOSETUP
DVI-D
HDMI
SDI 1/2
1)
2)
1)
4)3)
2 )
1) Press the power standby < v> button.
 fThe  [POWER OFF(STANDBY)] confirmation screen is displayed.
2) Press  qw to select [OK], and press the  button.
(Or press the power standby < v> button again.)
 fProjection of the image will stop, and the power indicator  on the projector body lights in orange. (The fan...

Chapter 3 Basic Operations — Projecting
56 - ENGLISH
Projecting
Check the projection lens attachment (x   page   46), external device connection (x   page   48), power cord connection (x   page   52), 
switch on the power ( x
  page   53) to start projecting. Select the video for projection, and adjust ap\
pearance of the projected image.
Selecting the input signal
Select an input signal.
1) Press the input selection (, , , , , ) buttons on the 
control panel or the remote control.
 fThe image of the...

Chapter 3 Basic Operations — Projecting
ENGLISH - 57
Moving the lens to the home position
To move the lens to the home position, perform the following procedure.
1) While the [SHIFT] adjustment screen is displayed, press the  button.
 fThe  [HOME POSITION]  screen is displayed.
MENUENTER
LENS
HOME POSITION
EXECUTE
CANCEL
2) While the [HOME POSITION] screen is displayed (for approximately five s\
econds), press the  
button.
 f[PROGRESS] is displayed in the  [HOME POSITION] screen, and the lens returns to...

Chapter 3 Basic Operations — Projecting
58 - ENGLISH
Projection lens Model No.ET- D75LE1, ET- D75LE2, ET- D75LE3, ET- D75LE4, 
ET- D75LE8, ET- D75LE10, ET- D75LE20, 
ET- D75LE30, ET- D75LE40ET-
D75LE6
PT
-
 DW11KU
Projection screen width H
Standard projection position 0.3 H
0.3 H
0.7 V
Projection screen height V 0.7 V 0.2 V
0.2 V
Projection screen width H
Standard projection position 0.2 H
0.2 H
0.6 V
Projection screen height V 0.6 V 0.2 V
0.2 V
Note
 f
When the optional fixed-focus lens (Model No.: ET-...

Chapter 3 Basic Operations — Projecting
ENGLISH - 59
 rFront view diagram of the lens mounter (viewed from the screen side)
(a)
(b) (c)
Lens mount bracket
Fixing screws
Note
 fFocus adjustment screws (a), (b), and (c) are adjusted with the lens attached.
Adjustment procedure
 rRelationship between the adjustment location and adjustment screws
(b) (c)
(b)+(c)
(a)
Adjustment location:
Location where the just focus point of the screen is in the 
inner side of the screen
When the just focus point of 
the...

Chapter 3 Basic Operations — Projecting
60 - ENGLISH
6) Press the  button on the remote control or the  button on t\
he control panel to display 
the [SHIFT] adjustment menu, and reset the screen position of the projec\
ted image on the screen 
surface back to an optimal state.
7)
 
Perform focus adjustment again near the center of the screen and if it i\
s still not enough, fine tune the 
amount of rotation of the adjustment screws.
8)

 
When adjustments have been made, securely tighten the loosened...