Panasonic Projector PT-D7700U PT-DW7000U User Manual

61
ADVANCED MENU
  DIGITAL CINEMA REALITYAUTO
  FORMAT SMPTE
  BLANKING
  INPUT RESOLUTION
  CLAMP POSITION
  EDGE BLENDING ON
  SYNC.TERM 75 
  RASTER POSITION
     :MENU SELECT
     :CHANGE       ENTER:SUB MENU
MAIN MENU
         PICTURE
         POSITION
         ADVANCED MENU
         LANGUAGE
         OPTION
         TEST PATTERN
         SIGNAL LIST
         SECURITY
EDGE BLENDING
  UPPER START 0
 OFF WIDTH 128
  LOWER START 0
 OFF WIDTH 128
  LEFT START 0
 OFF WIDTH 128
  RIGHT START 0
 OFF WIDTH...

62
How to use ADVANCED MENU
BRIGHT ADJUST
  BRIGHT INSIDE 6
  BRIGHT OUTSIDE 6
  UPPER 0
  LOWER 0
  LEFT 0
  RIGHT 0
Projection range Edge blending width (right) 
BRIGHT adjustment (right)
Marker
BRIGHT INSIDE BRIGHT OUTSIDE
Select the “BRIGHT ADJUST” with the
buttons.
Press the ENTER button.
The BRIGHT ADJUST screen will be displayed.
Select the “BRIGHT INSIDE” with the
buttons.
Adjust the compensation value (0-255)
with the  buttons.
Select the part of Upper, Lower, Right,
Left with  buttons.
With the...

63
ADVANCED MENU
  DIGITAL CINEMA REALITYAUTO
  FORMAT SMPTE
  BLANKING
  INPUT RESOLUTION
  CLAMP POSITION
  EDGE BLENDING OFF
  SYNC.TERM 75 
  RASTER POSITION
RASTER POSITION
  V: 0
  H: 0
  
MAIN MENU
         PICTURE
         POSITION
         ADVANCED MENU
         LANGUAGE
         OPTION
         TEST PATTERN
         SIGNAL LIST
         SECURITY
Raster position
When the whole area where the input picture can be displayed is not used, the picture can be moved to any
position inside the display...

64
Changing the display language 
• The on-screen display of the projector is set
to the English language on shipping.Note
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select the “LANGUAGE” with the
buttons.
LANGUAGE
  ENGLISH
  DEUTSCH
  FRANÇAIS
  ESPAÑOL
  ITALIANO
     :SELECT    ENTER:SET
MAIN MENU
         PICTURE
         POSITION
         ADVANCED MENU
         LANGUAGE
         OPTION
         TEST PATTERN
Press the “ENTER” button.
The LANGUAGE screen will be displayed....

65
How to change the system format
Pressing the SYSTEM SELECTOR button on the remote control or using the menu screen operation (page 83)
enables the user to make the following changes depending on S Video / Video input or the currently selected input
module.
The name of the selected system such as RGB, YP
BPRand AUTO is displayed on the top left of the screen and
disappears automatically.
Input module
ET-MD77SD1  :
      AUTO            480i             576i
                    ET-MD77SD3  :  S video /...

66
Option settings
OPTION
  PROJECTOR ID 2
  SETTING FRONT-F
  LAMP SELECT DUAL
  LAMP POWER HIGH
  RS232C SETTING
  OSD POSITION 2
  SYSTEM INFORMATION
  COLOR MATCHING OFF
  VIDEO SETTING
  AUTO SETUP
     :MENU SELECT
     :CHANGE
MAIN MENU
         PICTURE
         POSITION
         ADVANCED MENU
         LANGUAGE
         OPTION
         TEST PATTERN
         SIGNAL LIST
         SECURITY
     :MENU SELECT
ENTER:SUB MENU
Press the “ENTER” button.
The OPTION screen will be displayed.
Select...

67
A: Floor mount front projection (Front – Floor mount)
D: Ceiling mount rear projection (Rear – Ceiling mount) C: Floor mount rear projection (Rear – Floor mount)B: Ceiling mount front projection (Front – Ceiling mount)
Select the setting by displaying the on-screen indications using buttons of the remote control or the control panel on
the main unit.
Procedure of setting
OPTION
  PROJECTOR ID 2
  SETTING FRONT-F
  LAMP SELECT DUAL
  LAMP POWER HIGH
  RS232C SETTING
  OSD POSITION 2
  SYSTEM...

68
Option settings
Lamp select
Two internal lamps in the projector can be used either
in “DUAL” or “SINGLE” mode depending on users
needs or viewing conditions.
In the “SINGLE” mode, the projector may automatically
switches between one lamp and the other, or one of
the lamps can be specified.
“LAMP 1”: One lamp illuminates.
(Lamp Unit 1 is always used)
“LAMP 2”: One lamp illuminates.
(Lamp Unit 2 is always used)
“SINGLE”: One of the lamps illuminates.
(The lamp with shorter operating hours is...

69
Position of on-screen
indications
The user can specify the position of the on-screen
indications
“1”: Top left of the screen
“2”: Left center of the screen
“3”: Bottom left of the screen
“4”: Top center of the screen
“5”: Center of the screen
“6”: Bottom center of the screen
“7”: Top right of the screen
“8”: Right center of the screen
“9”: Bottom right of the screen
OSD POSITION1
2
8
9
System information
Displays the system information of the projector.
• Pressing the “ENTER” button will move on to...

70
Option settings
Adjusting color matching
When multiple sets are used simultaneously, this projector allows the user to correct the difference of colours
among the sets.
Procedure of adjustment
OPTION
  PROJECTOR ID 2
  SETTING FRONT-F
  LAMP SELECT DUAL
  LAMP POWER HIGH
  RS232C SETTING
  OSD POSITION 2
  SYSTEM INFORMATION
  COLOR MATCHING 3COLORS
  VIDEO SETTING
  AUTO SETUP
     :MENU SELECT        :CHANGE
ENTER:SUB MENU
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select...