Panasonic Projector PT-D7700U PT-DW7000U User Manual

41
Clearing the data of registered signals
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “SIGNAL LIST” with the  and
buttons.
Press the “ENTER” button.
The REGISTERED SIGNAL LIST screen will be
displayed.  The memories extend over 12 pages (A
to L with 8 data items each, giving total of 96
memories). 
Select the signal whose data is to be
cleared with the 
, , and 
buttons.
MAIN MENU
         PICTURE
         POSITION
         ADVANCED MENU
         LANGUAGE
         OPTION...

42
Registration of input signal data
Sub memory
The projector is provided with a sub memory function to register plural pieces of image adjustment data even they
are determined to be the same signal by the frequency and form of the synchronization signal source.
Use this function when the user needs adjustment of picture quality such as aspect switching and white balance
using the same signal source.
Sub-memory contains all data that can be adjusted by signals such as screen aspect ratio and image...

43
On-screen indications
Input switching / signal switching
This shows the registered signal name on the status screen for signal switching.
The designation can be set by the sub memory items.
The place in which address code
(A1, A2, ..., H7 and H8) signals are
registered 
displays the sub
memory number.
Details of registered signal
Restrictions
The maximum sub memory items that can be registered for the projector are 96 including the basic signal.
Note
REGISTERED SIGNAL STATUS
  NAME: SXGA60-A1...

44
Using the FREEZE function
Pressing the “FREEZE” button of the remote control switches between a still image and a motion image.
If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode
is available that allows the user to hide images temporarily.
Press the “SHUTTER” button of the remote control or the main unit.
The image is turned off.
Press the “SHUTTER” button again. 
The image comes back.
A portion of the picture on the screen can be...

45
Structure of menu screens
Menus are extensively used for configuring, adjusting or reconfiguring the projector.
The menus structure is as follows:
MAIN MENU
         PICTURE
         POSITION
         ADVANCED MENU
         LANGUAGE
         OPTION
         TEST PATTERN
         SIGNAL LIST
         SECURITY
     :MENU SELECT
ENTER:SUB MENU
PICTURE
  PICTURE MODE DYNAMIC
   COLOR 50
   TINT 30
   COLOR TEMP. DEFAULT
   GAMMA 2.2
  CONTRAST 32
  BRIGHT 32
  SHARPNESS 6
  NOISE REDUCTION 2
  DYNAMIC...

46
On-screen menus
Basic operations on menu
screen
Press the “MENU” button.
The MAIN MENU appears on the screen.
Select the desired item with the  or
button.
Selected items are displayed in blue.
Press the “ENTER” button to establish
your selection.
The submenu for the selected option will now
open. (Example: PICTURE Menu)
Highlight the desired adjustment item
with the  or  button, then change
or adjust the parameter value with the
or button.
For the items such as “COLOR”,“TINT”, “CONTRAST”
and “BRIGHT”,...

47
Adjusting the picture
Switching the picture mode
The user can switch to the desired picture mode suitable for the image source and the environment in which this
projector is used.
PICTURE
  PICTURE MODE DYNAMIC
   COLOR 50
   TINT 30
   COLOR TEMP. DEFAULT
   GAMMA 2.2
  CONTRAST 32
  BRIGHT 32
  SHARPNESS 6
  NOISE REDUCTION 2
  DYNAMIC IRIS 1
     :MENU SELECT   
     :CHANGE   ENTER:REGISTER
MAIN MENU
         PICTURE
         POSITION
         ADVANCED MENU
         LANGUAGE
         OPTION...

48
Adjusting the picture
The desired picture can be obtained by following the procedure below.
Adjusting Contrast / Bright / Color / Tint
Adjustment procedure – to adjust picture (color intensity)
PICTURE
  PICTURE MODE DYNAMIC
   COLOR 50
   TINT 30
   COLOR TEMP. DEFAULT
   GAMMA 2.2
  CONTRAST 32
  BRIGHT 32
  SHARPNESS 6
  NOISE REDUCTION 2
  DYNAMIC IRIS 1
     :MENU SELECT   
     :ADJUST
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “PICTURE” with the 
buttons.
MAIN MENU...

49
PICTURE
  PICTURE MODE DYNAMIC
   COLOR 50
   TINT 30
   COLOR TEMP. DEFAULT
   GAMMA 2.2
  CONTRAST 32
  BRIGHT 32
  SHARPNESS 6
  NOISE REDUCTION 2
  DYNAMIC IRIS 1
MAIN MENU
         PICTURE
         POSITION
         ADVANCED MENU
         LANGUAGE
         OPTION
         TEST PATTERN
         SIGNAL LIST
         SECURITY
     :MENU SELECT
ENTER:SUB MENU
    SAVE AS DEFAULT SETTING FOR DYNAMIC?
OK ESC
Registering the picture mode settings as presettings
The screen settings which have been...

50
Adjusting the picture
DYNAMIC IRIS
  AUTO IRIS 2
  MANUAL IRIS OFF
  DYNAMIC GAMMA 1
  
  
  
  
     :MENU SELECT   
     :CHANGE
2
3
1 DYNAMIC IRIS
USER
OFF
DYNAMIC IRIS setting
Pictures with the optimum contrast will be displayed by automatically providing aperture compensation and signal
compensation to suit the pictures concerned.
Press the  buttons on the
“PICTURE” screen to select “DYNAMIC
IRIS”.
Select the DYNAMIC IRIS setting with
the buttons.
To further adjust the selected
compensation...