Panasonic Projector Pt Ae8000EH Operating Instructions

Read this first!
ENGLISH - 11
Important 
Information
CAUTION:
 
„
POWER
When disconnecting the power cord, be sure to hold the power plug and power connector .
If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric 
shocks will result.
When not using the projector for an extended period of time, disconnect the power plug from the wall 
outlet and remove the batteries from the remote control.
Failure to do so may result in fire or electric...

Read this first!
12 - ENGLISH
Important 
InformationCAUTION:
 
„
Viewing 3D video
Those with a medical history of oversensitivity to light, heart problems, or poor physical health should 
not view 3D images.
This may lead to a worsening of medical conditions.
If you feel tiredness or discomfort, or other abnormality while viewing with 3D Eyewear, discontinue use. 
Continuing use may cause health problems. Take a break as necessary.
When viewing 3D movies, aim to view one movie at a time and take a...

Read this first!
ENGLISH - 13
Important 
Information
end of Read this first
CAUTION:
 
„
Use of 3D Eyewear (optional)
Do not move about while wearing the 3D Eyewear.
This may cause the surroundings to darken and may lead to injuries suf fered from falling over etc.
Do not use the 3D Eyewear other than for the indicated purpose.
Do not use 3D Eyewear that is broken.
This could lead to injury or eye fatigue.
Do not place objects that break easily close by when using 3D Eyewear .
3D video may be...

Precautions for use
14 - ENGLISH
Important 
Information
 
■ Be sure to use the projector after removing the packaging material, such as 
the fastening tapes and protective sheet.
Take proper care when disposing of the removed packaging material.
Cautions when transporting
 
z Ensure that the supplied lens cover is attached when transporting.
 
z Hold the bottom of the projector when transporting.
 
z Do not transport with the front adjustable feet extended. Doing so may result in damage to the front...

Precautions for use
ENGLISH - 15
Important 
Information
 
■ When using an infrared communications device
If you use infrared communication devices (such as infrared cordless headphones or an infrared wireless mic), communication 
problems (such as noise) may occur. Therefore, use such devices in a location far away enough from the projector so as to have 
no effect, or install the receiver of the device in a location that is not struck by light from the projector.
 
■ Installation precautions 
 
z Do not...

Precautions for use
16 - ENGLISH
Important 
InformationCautions on use
 
■ In order to view clear video images
 
z Clear, high contrast video can be viewed when curtains are closed and lights near the screen are extinguished in 
order to stop light from reaching the screen.
 
z In some rare cases, depending on the usage environment a “flickering” may appear on the screen due to the 
effects of air from the exhaust port or hot/cold air from air conditioners. Do not set up this projector in a situation...

Precautions for use
ENGLISH - 17
Important 
Information
Accessories
Please confirm that the items displayed below are included.
Wireless remote control unit: 1
(N2QAYB000680)Lens cover: 1
(TXFKK01THHZ)
(Attached to the projector by 
default.)  Power cord: 1
(TXFSX01RXRZ)
AA/R6 battery: 2
(For remote control unit)
CD-ROM: 1
(TXFQB02THHZ) 
Attention
 
z Dispose of the packaging appropriately after removing from the product.
 
z Contact an Authorized Service Center if you lose any of the included items.
 
z...

About your projector
18 - ENGLISH
Preparation
Remote control
 
■ Top
 
■ Front
Adjust the zoom and focus.
Display the [
MEMORY 
LOAD] menu.
Display the input waveform.
Reset adjusted menu values  to the default settings.
Use for menu screen  operation.
Display the [ 3D SETTINGS ] 
menu. 
Allocate frequently used operations  and use as a shortcut button.
Inserting and removing the remote control batteries
Open the cover. Insert the batteries and 
replace the cover (insert 
from 
 side).
Display the menu...

About your projector
ENGLISH - 19
Preparation
Projector body
Attention
 
z Ensure that there are no build ups of dirt on the air intake and exhaust ports.
 
z Do not place objects in front of the transmitter for the 3D Eyewear
. 
This may lead to the 3D Eyewear not operating correctly.
 
Use for menu screen
operation
Switch input
Adjust the focusAdjust the size of the 
image
 
■ Control panel
Power button
With the  
switch of the projector turned 
, switch between the 
standby mode and projection 
mode....

About your projector
20 - ENGLISH
Preparation
 
Main power
Switch the projector on/off.
Lens cover attachment 
hole
Connecting 
terminals
Air intake port
 
■ Back and bottom view
Security slot
The security slot is compatible with the 
 
Kensington MicroSaver Security System.
Front adjustable 
feet
Screw up/down to 
adjust the projection 
angle.
AC IN
Connect the 
power cord 
included.
 
■ Connecting terminals
SERIAL
Terminal for controlling the 
projector using a computer.
HDMI IN
Connect HDMI 
signal...