Panasonic Projector Pt Ae8000EH Operating Instructions

LCD Projector  
Thank you for purchasing this Panasonic product.
■  Before operating this product, please read the instructions (Basic Guide / Functional Manual) carefully and 
save this manual for future use.
■ Before using your projector, be sure to read “Read this first!” (
 pages 6 to 13).
Operating Instructions
Functional Manual  
0086008F0088008D008A00940089
TQBJ0470
Model No.00910095006E008200860079007100710071 

2 - ENGLISH
Trademarks
• Apple and iPhone are the trademarks of Apple Inc. registered in the United States and other countries.
•  VGA and XGA are trademarks of International Business Machines Corporation.
•  SVGA is a registered trademark of the Video Electronics Standards Association.
•  HDMI, the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing 
LLC. 
•  The font used in the on-screen displays is a Ricoh bitmap font, which is manufactured and...

ENGLISH - 3
 Equipped with 3D (3D motion remaster, 3D double-speed 
drive technology, and 2D to 3D 
conversion technology) that help 
enjoy diverse content in high picture 
quality.
 Brightness and contrast have been upgraded with the introduction of 
the newly developed high intensity 
lamps and optical system.
 Equipped with the new parallax adjustment monitoring function for 
simplifying the adjustment of lateral 
parallax during the input of 3D 
image signals, and the new gamma 
adjustment function...

 
4 - ENGLISH
Important 
Information
Preparation
Getting Started
Basic Operation
Settings
Maintenance
Appendix
ContentsBe sure to read “Read this first!”. ( pages 6 to 13)
Important Information
Read this first!  ..................................................... 6
Precautions for use  ......................................... 14
Cautions when transporting ..........................................14
Cautions when installing  ............................................... 14
Cautions on use...

 
ENGLISH - 5
Important 
Information
Preparation
Getting Started
Basic Operation
Settings
Maintenance
Appendix
Contents 
[CLOCK PHASE]  .......................................................... 60
[ASPECT]  ...................................................................... 61
[WSS]  ............................................................................ 63
[OVER SCAN]  ............................................................... 63
[KEYSTONE]...

Read this first!
6 - ENGLISH
Important 
Information
Read this first!
WARNING: THIS APPARATUS MUST BE EARTHED.
WARNING:      
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain 
or moisture.
Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator 
position is equal or less than 70 dB (A) according to ISO 7779.
WARNING:
1.    Remove the plug from the mains socket when this unit is not in use for a prolonged period...

Read this first!
ENGLISH - 7
Important 
Information
IMPORTANT: THE MOULDED PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse 
is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating 
of 13 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark 
 or the BSI mark  on the body of the fuse.
If the plug...

Read this first!
8 - ENGLISH
Important 
InformationWARNING:
 
„
POWER
The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily 
accessible when problems occur. If the following problems occur, cut off the power supply 
immediately.
Continued use of the projector in these conditions will result in fire or electric shock.
 
z If foreign objects or water get inside the projector, cut off the power supply.
 
z If the projector is dropped or the cabinet is broken,...

Read this first!
ENGLISH - 9
Important 
Information
WARNING:
 
„
ON USE/INSTALLATION
Do not place the projector on soft materials such as carpets or sponge mats.
Doing so will cause the projector to overheat, which can cause burns, fire or damage to the projector .
Do not set up the projector in humid or dusty places or in places where the projector may come into 
contact with oily smoke or steam, ex. a bathroom.
Using the projector under such conditions will result in fire, electric shocks or...

Read this first!
10 - ENGLISH
Important 
InformationWARNING:
 
„
ACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire.
 
z Do not use unspecified batteries.
 
z Do not disassemble dry cell batteries.
 
z Do not heat the batteries or place them into water or fire.
 
z Do not allow the + and - terminals of the batteries to come into contact with metallic objects such as...