Panasonic Projector Pt Ae8000EH Operating Instructions

Technical information
ENGLISH - 101
Appendix
Supported 3D video signal list
When [3D INPUT FORMAT] is set to [AUTO], the 3D signals supported by this projector are the HDMI signals in 
the table below.
ModeFormat of 3D video signals
FRAME PACKING SIDE BY SIDETOP AND BOTTOM
750 (720)/60p ○*○○*
750 (720)/50p ○*
r○*
1 125 (1 080)/60i —○*—
1 125 (1 080)/50i —○*—
1 125 (1 080)/24p ○*○○*
1 125 (1 080)/60p —○—
1 125 (1 080)/50p —
r—
*: Indicates a 3D mandatory format signal that meets the HDMI standards.
r: 3D...

Technical information
102 - ENGLISH
Appendix
Serial terminal
The serial port on the connector panel of the projector conforms to the RS-232C interface specification, so the 
projector can be controlled by a personal computer connected to this port.
 
■ Connection
Serial terminal (female)
D-sub 9 pin (male)
Computer
 
■ Pin assignments and signal names
D-Sub 9 Pin (external view) 
 
(6)
(1) (9)
(5) Pin No.
Signal name Contents
(1) —NC
(2) TXDTransmitted data
(3) RXDReceived data
(4) —NC
(5) GNDEarth
(6)...

Technical information
ENGLISH - 103
Appendix
 
■ Cable specifications
(When connected to a personal computer)
 
■ Control commands
Commands available when controlling this projector from a computer are as follows.

CommandControl contents
Remarks
PON POWER ON In standby mode, all commands other than the PON command are ignored.
The PON command is ignored during lamp on control.
 
z If a PON command is received while the cooling fan is operating after the lamp has 
switched off, the lamp is not turned...

Technical information
104 - ENGLISH
Appendix
CommandControl contentsRemarks
KST KEYSTONE Displays the individual adjustment screen of [KEYSTONE].
DAM ADVANCED MENU Displays the individual adjustment screen of the [ADVANCED] menu operated immediately 
before this operation.
OAS AUTO SETUP Operates AUTO SETUP.
COMPUTER IN (RGB) signals only (exc. movie based signals)
OOT SLEEPSets the duration of time after which the power is to be turned of
f automatically. (
 page 80)
0 = OFF   1 = 60MIN.   2 = 90MIN....

Technical information
ENGLISH - 105
Appendix

CommandControl contentsParameter
QPW Power status 000 = OFF  001 = ON
QIN INPUT signal status CP1 = COMPONENT IN   SVD = S-VIDEO IN
 
VID = VIDEO IN   HD1 = HDMI 1 IN   HD2 = HDMI 2 IN   HD3 = HDMI 3 IN  
RG1 = COMPUTER IN
QPM PICTURE MODE 
status NOR = NORMAL   DYN = DYNAMIC   709 = REC709   DCN = D-CINEMA
 
CN1 = CINEMA1   CN2 = CINEMA2   GM1 = GAME (
 page 40) 
QSH BLANK status 0 = OFF  1 = ON (
 page 83)
QFZ FREEZE status 0 = OFF  1 = ON (
 page 83)...

Specifications
106 - ENGLISH
Appendix
Specifications
The following table describes the specifications of the projector.
Power supplyAC 100-240 V  50 Hz/60 Hz
Power consumption Less than 310 W
During standby (when fan is stopped): 0.08 W
Amps 3.8 A - 1.5 A
LCD panel Panel size (diagonal)
18.7 mm (0.74")
Aspect ratio 16 : 9
Display method 3 transparent LCD panels (RGB)
Drive method Active matrix method
Pixels 2 073 600 (1 920 x 1 080) x 3 panels
Lens Motorized zoom (2x)/Motorized focus
F 1.9 - 3.2, f...

Specifications
ENGLISH - 107
Appendix
TerminalsS-VIDEO IN
1 set, Mini DIN 4p Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 Ω
VIDEO IN 1 set, RCA pin jack 1.0 V [p-p], 75 Ω
COMPUTER IN 1 set, D-sub HD 15-pin (female)
(RGB signal)
R.G.B.
0.7 V [p-p], 75 Ω
G.SYNC 1.0 V [p-p], 75 Ω
HD/SYNC
*1TTL high impedance, automatic 
positive/negative polarity 
compatible
VD
*1TTL high impedance, automatic 
positive/negative polarity 
compatible
(Y, P
B/CB, PR/CR signal)
Y: 1.0 V [p-p] (including sync), 75 Ω
P
B/CB, PR/CR0.7 V...

Specifications
108 - ENGLISH
Appendix
Dimensions
Unit: mm
470 
(18 1/2) 140 
(5 1/2)
60 
(2 3/8)
14 
(9/16)
345
 (13 19/32)
19 (3/4)
151 
(5 15/16)1 16 
(4 9/16)137 
(5 13/32)  

Index
ENGLISH - 109
Appendix
Index
Numbers
2D TO 3D .................................................. 69
3D Eyewear  .............................................. 36
3D EYEWEAR BRIGHTNESS  ................ 70
3D INPUT FORMAT  ................................. 64
3D IR TRANSMITTER  ............................. 70
3D MOTION REMASTER  ....................... 72
3D PICTURE BALANCE  ......................... 66
3D SAFETY PRECAUTIONS  ................. 72
3D SETTINGS  .......................................

Panasonic System C\rommunications Comp\rany of Nort\f America\r
One Panasonic Way \S2F-13, Seca\fc\fs, NJ \S0\b094
TEL: (8\b\b) 803 - 8492
Panasonic Canada In\rc\b
5\b\b0 Ambler Drive, M\Sississa\fga, Ontario\S L4W 2T3
TEL: (905) 624 - 50\S10
0ñ1111111
10Á0ä11111111
11
Web Site : http://panasonic.net/avc/projector/
© Panasonic Corporation 2012M0912KM0 -KI
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union.
If you wish...