Panasonic Projector Pt Ae1000u Operating Instructions

ENGLISH - 31
Settings
PICTURE Menu
Depending on the projection environment, you can use 
these preset parameter settings to optimise image 
projection. Press I H to cycle through the options.
You can adjust the contrast of the projected image. 
Adjust the BRIGHTNESS in advance if necessary.
 Setting range: -64 to +64
You can adjust the brightness of the projected image.
 Setting range: -32 to +32You can adjust the color saturation of the projected 
image.
 Setting range: -32 to +32
 When PC is connected,...

PICTURE Menu
32 - ENGLISH
Settings
You can switch automatic adjustment of the lamp and 
the lens iris on/off.
•ON: Automatic adjustment
•OFF: No adjustment
You can monitor whether or not the luminance level of 
the input signal is in the recommended range by 
displaying it in the waveform monitor. If the waveform is 
not in the range, adjust it for the best quality. See 
“Adjusting the waveform of the input signal” on page 24.
1. Press F G to move to the required waveform 
style.
2. Press ENTER to...

PICTURE Menu
ENGLISH - 33
Settings
JMPEG NR
You can switch the automatic noise reduction 
system for MPEG format images on/off. The 
system minimizes block noise and mosquito noise 
to eliminate jagged edges, providing an overall 
smoother image. Press I H to select the required 
setting.
•ON:Active
•OFF: Deactive
JCINEMA REALITY
You can switch the automatic image synchronizer 
on/off for 24 frames a second images, such as 
movies. Press I H to select the required setting.
•ON:Active
•OFF: Deactive...

34 - ENGLISH
Settings
POSITION Menu
You can move the projected image horizontally for fine 
adjustment.
You can move the projected image vertically for fine 
adjustment.If you have interference patterns on the projected 
image, which is sometimes referred to as moire or 
noise, you can minimize it by pressing I H to adjust the 
clock frequency.
If you require further adjustment for the same reason as 
the DOT CLOCK adjustment, you can fine adjust the 
timing of the clock. Press I H to adjust.
H -...

POSITION Menu
ENGLISH - 35
Settings
You can switch the aspect ratio manually when needed.
JAspect ratio options and projection example
If you apply the aspect ratio options to the projected image, the result will be as follows. The result may differ 
due to the input signals. See “Switching the aspect ratio” on page 23.
QVIDEO/S-VIDEO/COMPONENT
Not available with 1 125 (1 080)/50i, 1 125 (1 080)/60i, 1 125 (1 080)/50p, 1 125 (1 080)/60p, 
1 125 (1 080)/24p, 750 (720)/50p and 750 (720)/60p signals....

POSITION Menu
36 - ENGLISH
Settings
JAspect ratio depend on signals
Press I H to cycle through the aspect ratio 
options. The cycle pattern depends on the 
connected signals.
WSS (Wide Screen Signalling) detects if a 
PAL/625p (576p)/625i (576i) signal is input and that 
signal has an identification signal, and switch the aspect 
ratio to required setting automatically. You can switch 
the system off manually.If the 4 edges of an image is partly dropped, you can use 
this function to adjust and project...

ENGLISH - 37
Settings
LENS CONTROL Menu
You can use the 2 different test patterns to adjust the focus and zoom of the image. See “Lens shift and positioning” 
on page 16.
1. Press ENTER to display test pattern 1.
 Press F G to adjust the focus and I H to adjust the zoom.
2. Press ENTER to display test pattern 2.
 Press F G to adjust the focus and I H to adjust the zoom.
3. Press ENTER to display the projected image.
 You can confirm the adjustment is fit to the projected image.
4. Press MENU or RETURN to...

38 - ENGLISH
Settings
OPTION Menu
When you press INPUT or the INPUT SELECT button 
to change the input method, the guidance appears in the 
upper right corner of the screen. The following display 
methods are available. Press I H to cycle through the 
options.
You can change the background color of the menu. 
Press I H to cycle through the options.You can change the position where to display the menu. 
Press I H to cycle through the options.
You can choose a BLUE or BLACK screen for when the 
projector...

OPTION Menu
ENGLISH - 39
Settings
When installing the projector, select the projection 
method according to the projector position. Press I H 
to cycle through the options. See “Projection method” 
on page 15.
You can select the required duration of time and set the 
off timer to turn off the POWER of the projector 
automatically. 3 minutes before turn-off, the countdown 
of minutes will be displayed in the lower right corner. 
Press I H to cycle through the options. See “Switching 
off the projector...

40 - ENGLISH
Maintenance
TEMP and LAMP Indicators
If a problem should occur with the projector, the TEMP and/or LAMP indicators will alert you. Respond to the alert 
as follows.
1. Confirm the POWER indicator status and turn off the projector in the proper way.
2. Find out the cause of the problem.
3. Follow the instructions for each indication below and solve the problem.
4. Turn on the projector in the correct way and confirm the indicator is not indicating a problem any longer.
JTEMP indicator
JLAMP...