Panasonic Projector Pt Ae1000u Operating Instructions

ENGLISH - 21
Basic Operation
Projecting an image
1. Switch on the connected devices.
 Press the play button of the required device.
2.Press the INPUT button to select the required 
input method if needed. See Switching the input 
signal on page 23.
 The image will be projected on the screen.
1. Press ASPECT to select the required aspect 
mode. See Switching the aspect ratio on 
page 23.
2. Adjust the projected image with the Lens 
shift dials. See Lens shift and positioning 
on page 16.
3. Adjust the...

22 - ENGLISH
Basic Operation
Remote control operation
You can operate the projector with the Remote control 
within the remote range 7 m.
QFacing to the projector
Ensure the Remote control emitter is facing to 
the Remote control signal receptor on front of 
the projector and press the required buttons to 
operate.
QFacing to the screen
Ensure the Remote control emitter is facing to 
the screen and press the required buttons to 
operate the projector. The signal will be reflected 
off the screen. The...

Remote control operation
ENGLISH - 23
Basic Operation
You can switch the input method manually 
by pressing the INPUT button. Press the 
button several times or press I H to cycle 
through the input methods as follows. The 
actual projected image will be changed in a 
while.
Graphical guidance will be displayed on the upper right 
of the display and you can confirm the selected input 
method which is highlighted in yellow. See INPUT 
GUIDE on page 38.
The aspect ratio is selected automatically, 
or you...

Remote control operation
24 - ENGLISH
Basic Operation
You can monitor if the brightness and 
contrast level of the input signal is in the 
recommended range by displaying it in the 
waveform monitor. See WAVEFORM 
MONITOR on page 32.
1. Project a commercial adjusting signal.
2. Press the WAVEFORM button to display the 
waveform monitor.
3. Press ENTER button to select the required 
adjusting mode.
4. Press F G I H to adjust the displaying 
position of the waveform monitor.
5. Adjust the waveform in each...

Remote control operation
ENGLISH - 25
Basic Operation
You can adjust the focus and zoom of the 
projected image. Press the LENS button to display the LENS control menu. See LENS 
CONTROL Menu on page 37.
You can switch the preset picture mode 
settings by pressing the PIC. MODE 
button. Press the button until the required 
setting is selected. See PICTURE MODE 
on page 31.
You can display one of the PICTURE or 
ADVANCED menu items by pressing the 
PICTURE ADJUSTMENT button. Press 
the button to switch...

Remote control operation
26 - ENGLISH
Basic Operation
You can adjust a selected color individually 
and save and retrieve under the PICTURE 
MODE setting. Press the COLOR 
MANAGEMENT button to open the menu.
JCreate a new profile
QAdjusting the selected color
Select a color and adjust COLOR, TINT and 
BRIGHTNESS.
1. Select the CURSOR menu and press 
ENTER.
 The projected image is captured, and the target 
cursor is displayed. 
 When the LOG is fully stored, the target cursor 
will not be displayed. See...

Remote control operation
ENGLISH - 27
Basic Operation
QManaging stored logs
You can edit or delete the stored logs of the 
selected PICTURE MODE.
1. Select LOG and press ENTER.
 The LOG menu is displayed.
2. Select the required log from 1 - 8 or ALL 
DELETE, and press ENTER.
 Select CHANGE to edit the log.
The cursor menu is displayed and you can 
readjust the color.
 Select DELETE to delete the log.
The confirmation screen will be displayed. 
Select OK to delete.
 When you select ALL DELETE, the DELETE...

28 - ENGLISH
Settings
Menu Navigation
The menu system allows you to access functions which do not have their own dedicated buttons on the Remote 
control. The menu options are structured and categorized. You can navigate through the menu with FG I H 
buttons.
JDisplaying the Main menu
Press MENU button to display the Main menu 
and the operating guidance.
JOperating procedure
1. Press F G to scroll to the required Main menu 
item and press ENTER to select.
 The selected item is highlighted in orange and...

Menu Navigation
ENGLISH - 29
Settings
The Main menu has 5 options. Select the required menu item and press ENTER to display the Sub-menu.
J PICTURE
See “PICTURE Menu” on page 31.
J POSITION
See “POSITION Menu” on page 34.
J LENS CONTROL
See “LENS CONTROL Menu” on page 37.
Main menu and Sub-menu
NOTE:
 Some default settings vary by the selected input signal.
Sub-menu itemsDefault settingSub-menu itemsDefault setting
PICTURE MODE NORMAL DYNAMIC IRIS ON
CONTRAST0WAVEFORM MONITOR
BRIGHTNESS0ADVANCED MENU...

Menu Navigation
30 - ENGLISH
Settings
J LANGUAGE
Press F G to select the required language and press ENTER.
J OPTION
See “OPTION Menu” on page 38.
Sub-menu itemsDefault settingSub-menu itemsDefault setting
INPUT GUIDE DETAILED INSTALLATION FRONT/DESK
OSD DESIGN TYPE1 SLEEP OFF
OSD POSITION CENTER ALTITUDE LOW
BACK COLOR BLUE LAMP POWER NORMAL
STARTUP LOGO ON LAMP RUNTIME
AUTO SEARCH ON FUNCTION BUTTON
HDMI SIGNAL LEVEL NORMAL
PT-AE1000U.book  Page 30  Monday, October 16, 2006  1:40 PM