Panasonic Progressive Wide Plasma Display Th 37ph9 Operating Instructions

21
MULTI
PIPMULTI
PIPMULTI
PIP
ABABAB
BABABA
PC1
VIDEO2SELECT
SWAPSWAPSWAP
PC1
VIDEO2
VIDEO2
VIDEO1PC1
VIDEO2
A
A
A
CB
B
B
D
MULTI PIP
Press repeatedly.
Each time pressing this button main picture and sub picture will be displayed 
as follows below.
Press to swap main 
picture and sub picture.
Press to select the input mode.
Under main Picture and sub picture display, select the 
picture which you would like to change input modes.
Notes:
• The sub picture sound is heard while a sub picture 
operation is...

22
Advanced PIP
1
2
3
5Press to display the Setup menu.
Press to select “OSD Language”.
Press and hold until the Options menu is displayed.
Press to select Advanced PIP.
Press to adjust the menu.
Off : Sets normal two screen display mode
        (see page 21).
On : Sets Advanced PIP mode.
Press to confi rm.
Press to exit from 
Options menu.
4
6
Notes:
•  Advanced PIP corresponding signalOne screen  Advanced PIP
Main screen Sub screen
• Sound output is from the picture which is selected in Audio OUT (PIP)...

23
2/2
ADVANCED SETTINGS COLOR TEMP
COLOR MANAGEMENTNORMAL
OFF
ON
PICTURE
1/2
25
0
0
0
3
PICTURE
NORMALNORMALIZESTANDARD
BRIGHTNESS
SHARPNESS PICTURE MENU
COLOR PICTURE
TINT
Press to select “ON”.
Press the left    or right     button to switch between modes.
STANDARD
For viewing in standard (evening lighting) environments.
This menu selects the normal levels of BRIGHTNESS 
and PICTURE.
DYNAMIC
For viewing in brighter environments.
This menu selects higher than normal levels of 
BRIGHTNESS and PICTURE....

24
PICTURE Adjustments
ADVANCED SETTINGS
Notes:
•  “COLOR” and “TINT” settings cannot be 
adjusted for “RGB/PC” and “DVI” input 
signal.
•
  You can change the level of each function 
(PICTURE, BRIGHTNESS, COLOR, TINT, 
SHARPNESS) for each PICTURE MENU.
• The setting details for STANDARD, 
DYNAMIC and CINEMA respectively 
are memorized separately for each input 
terminal.
• The “TINT” setting can be adjusted 
for NTSC signal only during “VIDEO 
(S VIDEO)” input signal.
• In PICTURE, there is not a...

25
0
0
0
SOUND
NORMALNORMALIZESTANDARD
OFF TREBLE AUDIO MENU
BALANCE BASS
0
MID
SURROUND
MAIN AUDIO OUT (PIP)
SOUND Adjustment
MUTE
BASS
Adjusts low pitch sounds
MID
Adjusts normal sounds
TREBLE
Adjusts pitch sounds
BALANCE
Adjusts left and right volumes
SURROUND
Select On or Off
Notes:
• Press the SURROUND button to directly turn the surround effect ON and OFF. (see page 14)
• BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.
1
Press to display the SOUND menu.
Press...

26
Digital Zoom
This displays an enlargement of the designated part of the displayed image.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
•  When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
•  The Digital Zoom function cannot be selected while in the following operation state:
  “Multi-viewer” (Picture in Picture, Picture out Picture, Picture...

27
PRESENT TIME SETUP / SET UP TIMER
PRESENT TIME SETUP
The timer can switch the Plasma Display ON or OFF.
Before attempting Timer Set, confi rm the PRESENT TIME OF DAY and adjust if necessary. 
Then set POWER ON TIME / POWER OFF TIME.
Press to display the SET UP menu.
Press to select SET UP TIMER or 
PRESENT TIME SETUP.
Press to display the SET UP TIMER screen or 
PRESENT TIME SETUP screen.
Display the PRESENT TIME SETUP screen.
To set up PRESENT TIME OF DAY, follow the procedure described below.
Press...

28
PRESENT TIME SETUP / SET UP TIMER
SET UP TIMER
Press to select 
POWER ON TIME / POWER OFF TIME.
Press to set up POWER ON TIME / POWER OFF 
TIME.
 button: Forward
 button: Back
Notes:
• Pressing “  ” or “  ” button once changes POWER ON TIME / POWER OFF TIME 
1minute.
• Pressing “  ” or “  ” button continuously changes POWER ON TIME / POWER OFF 
TIME by 15 minutes.
Press to select POWER ON FUNCTION 
/ POWER OFF FUNCTION. 
Press to select ON.
Press twice to exit from SET UP.
Note:
Timer function will...

29
Do not display a still picture, especially in NORMAL mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
NEGATIVE / SCROLL selection
2
3 1
4
Press to display the SET UP menu.
Press to select the SCREENSAVER.
Press to select the SCREENSAVER screen.
Press to select the FUNCTION.
Press to select the desired function.
WHITE BAR SCROLL  NEGATIVE 
WHITE BAR SCROLL  : A white bar will scroll from left to right.
NEGATIVE    : A negative image will be displayed on the...

30
Setup of SCREENSAVER Time
After selecting TIME OF DAY or INTERVAL, the relevant Time Setup will become available for selection and the Operating 
Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.)
Press to select START TIME / FINISH TIME
(When TIME OF DAY is selected).
Press to select SHOW DURATION / SAVER 
DURATION (When INTERVAL is selected).
Press to setup.
   button: Forward
 button: Back
Note:Timer function will not work unless “PRESENT TIME OF DAY” is set. Notes:
 • Pressing “ ”...