Home
>
Panasonic
>
Display
>
Panasonic Progressive Wide Plasma Display Th 37ph9 Operating Instructions
Panasonic Progressive Wide Plasma Display Th 37ph9 Operating Instructions
Here you can view all the pages of manual Panasonic Progressive Wide Plasma Display Th 37ph9 Operating Instructions . The Panasonic manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 41
41 1 2 3 5Press to display the Setup menu. Press to select “OSD Language”. Press and hold until the Options menu is displayed. Press to select your preferred menu. Press to adjust the menu. Press to confi rm. Press to exit from Options menu. 4 6 Item Effect Adjustments Off-timer function EnableDisable Enable: Switches the “Off-timer function” “On” Disable: Switches the “Off-timer function” “Off” Note: When “Disable” is set, the Off-timer is cancelled. Onscreen display On Off On: Displays all the...
Page 42
42 Item Effect Adjustments Initial VOL level Off On Press button to adjust the volume when TV is turned on. Off On Off: Sets normal volume. On: Sets your preferred volume. Notes: • When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.•You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu. Maximum VOL level Off On Press button to...
Page 43
43 2/3Options OffOffOff Off 0 Remote ID Serial ID ID select Button lock Remocon User level Item Effect Adjustments Button lockOff MENU&ENTER On Off: All the buttons at the bottom of the main unit can be used. MENU & ENTER: Locks MENU and ENTER/ buttons on bottom face of main unit. On: Locks all the button on bottom face of main unit. Remocon User levelOff User1 User2 User3 Off: You can use all of the buttons on the remote control. User1:You can only use ,,,,,,, buttons on the remote...
Page 44
44 Shipping condition This function allows you to reset the unit to the factory setting. 1 2 3 4 Press to display the SET UP menu. Press to select “OSD LANGUAGE”. Press and hold till the SHIPPING menu is displayed. Press to select “YES”. Press to confi rm. [from the unit] 1 Press the MENU button till the Setup menu is displayed. 2 Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”. 3 Press and hold the ENTER button till the SHIPPING menu is displayed. 4 Press the Volume Up “+” or...
Page 45
45 Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Picture Sound InterferenceNoisy SoundElectrical Appliances Cars / Motorcycles Fluorescent light Normal PictureNo SoundVolume (Check whether the mute function has been activated on the remote control.) No PictureNo SoundNot plugged into AC outlet Not switched on PICTURE and BRIGHTNESS/Volume setting (Check by pressing the power switch or stand-by button on the remote...
Page 46
46 VIDEO/COMPONENT/RGB/PC input signals VIDEO input Signal nameHorizontal Vertical frequency(kHz) frequency(Hz) 1 NTSC 15.73 59.94 2 PAL 15.63 50.00 3 PAL60 15.73 59.94 4 SECAM 15.63 50.00 5 Modifi ed NTSC 15.73 59.94 Applicable input signals for Component / Mini D-sub 15P (Component) / RGB / Mini D-sub 15P (RGB) ( Mark) Signal nameHorizontal frequency (kHz)Vertical frequency (Hz)Component / Mini D-sub 15P (Component)RGB / Mini D-sub 15P (RGB) 1 525 (480) / 60i 15.73 59.94 2 525 (480) / 60p 31.47...
Page 47
47 Specifi cations TH-42PS9UK Power Source 120 V AC, 50/60 Hz Power Consumption Power on 290W Stand-by condition Save OFF 0.6 W, Save ON 0.4 W Power off condition 0.1 W Plasma Display panelDrive method : AC type 42-inch, 16:9 aspect ratio Contrast Ratio Max 10000:1 Screen size 36.2” (920 mm) (W) × 20.4” (518 mm) (H) × 42” (1,056 mm) (diagonal) (No.of pixels) 408,960 (852 (W) × 480 (H)) [2,556 × 480 dots] Operating condition Temperature 32 °F - 104 °F (0 °C - 40 °C) Humidity 20 % - 80 % Applicable...
Page 48
48 Specifi cations TH-37PH9UK TH-42PH9UK Power Source 120 V AC, 50/60 Hz Power Consumption Power on 300W 345W Stand-by condition Save OFF 0.6 W, Save ON 0.4 W Save OFF 0.6 W, Save ON 0.4 W Power off condition 0.1 W 0.1 W Plasma Display panelDrive method : AC type 37-inch, 16:9 aspect ratioDrive method : AC type 42-inch, 16:9 aspect ratio Contrast Ratio Max 10000:1 Screen size 32.2” (818 mm) (W) × 18.1” (461 mm) (H) × 37” (939 mm) (diagonal)36.2” (920 mm) (W) × 20.4” (518 mm) (H) × 42” (1,056 mm)...
Page 49
49 Specifi cations TH-50PH9UK Power Source 120 V AC, 50/60 Hz Power Consumption Power on 460W Stand-by condition Save OFF 0.5 W, Save ON 0.3 W Power off condition 0.1 W Plasma Display panelDrive method : AC type 50-inch, 16:9 aspect ratio Contrast Ratio Max 10000:1 Screen size43.5” (1,106 mm) (W) × 24.5” (622 mm) (H) × 50” (1,269 mm) (diagonal) (No.of pixels) 1,049,088 (1,366 (W) × 768 (H)) [4,098 × 768 dots] Operating condition Temperature 32 °F - 104 °F (0 °C - 40 °C) Humidity 20 % - 80 % Applicable...
Page 50
Panasonic Broadcast & Television Systems Company, Unit of Panasonic Corporation of North America One Panasonic Way 2A-4 Secaucus, NJ 07094Panasonic Puerto Rico, Inc. Ave. 65de Infanteria, Km.9.5 San Gabriel Industrial Park Carolina, Puerto Rico 00985 PANASONIC PLASMA SCREEN Limited Warranty Panasonic Broadcast & Television Systems Company or Panasonic Puerto Rico, Inc. (collectively referred to as “the Warrantor”) will repair this product and all included accessories with new or refurbished parts,...