Panasonic Pc Software Package Wv Asm100 Operating Instructions

							21
B
Function panel
The following are available using the function panel located at the left side of the operation window.
•Display the device tree (the icons of the connected devices in the tree view), and display images by clicking the
desired camera icon 
•Group display
•Sequence display
•Quick playback
•Search
•Download
•Display the alarm log
•Display the recorder error log
•Display the network error log
When one of the function bars is clicked, the respective function panel will open. (It is impossible to open two or
more panels at the same time.) 
						

							22
Note:
Refer to the following about the descriptions of how to operate each function panel.
Device tree panel Confirm the registered recorders and cameras (page 35)
Group panel Display images from the cameras registered as a group (group display) (page 39)
Sequence panel Display images from the cameras registered as a group sequentially (sequence dis-
play) (page 40)
Quick Playback panel Play images using the Quick Playback panel (page 49)
Search panel Play recorded images using the Search panel (page 56)
Download panel Download recorded images (page 57)
Alarm log panel Alarm log panel (page 75)
Recorder error log panel Recorder error log panel (page 76)
Network error log panel Network error log panel (page 76) 
						

							23
Layout of the operation window
It is possible to hide the operational panel and the function panel of the operation window as follows.
Refer to the Menu bar section (page 18) for further information.
With the operation panel and the function panelWithout the operation panel
Without the function panelWithout the operation panel and the function
panel 
						

							24
Pop-up menu
When right-clicking on the image display area, the pop-up menu will be displayed. (Selection from the displayed pop-
up menu is available only when right-clicking on a 1-screen.)
Information display area
Information of the images currently displayed, such as time and date, camera title and the recording status, will be
displayed in this area.
qREC indicator
This indicator will light when the recording of the
images currently selected are being performed.
wCamera title
The camera title as the source of the image cur-
rently being displayed will be displayed.eTime and date
Time and date will be displayed. Time and date will
not be displayed when images are being displayed
directly from the camera. The time and date will be
followed by an asterisk * when the daylight saving
time is applied. Save as JPEG file…
Select this to save the image currently being displayed
as a JPEG file.
Note:
Save as JPEG file… on the pop-up menu will not
be displayed when the user is restricted by the user
level determined by the administrator to save an
image as a JPEG file.
Refer to the About the user level section (page
14) for further information about the user level.
Print…
Select this to print the image currently being displayed.
Note:
Select this to print the image currently being dis-
played.Print… on the pop-up menu will not be displayed
when the user is restricted by the user level deter-
mined by the administrator to print images.
Refer to the About the user level section (page
14) for further information about the user level.
EL-zoom
Select this to enlarge the image currently being dis-
played. x1, x2 and x4 are available.
Download
Select this to open the Download panel. Information
(recorder title/camera title/time and date) of the record-
ed image currently being played will be displayed in
the opened Download panel.
Notes:
•Download on the pop-up menu will not be dis-
played when the user is restricted by the user level
determined by the administrator to download
recorded images.
Refer to the About the user level section (page
14) for further information about the user level.
•When displaying live images, it is impossible to
select Download on the pop-up menu.
qwe 
						

							25
Playback operation panel
Notes:
•The playback operation panel will not be displayed when the user is restricted by the user level determined by
the administrator to play recorded images.
Refer to the About the user level section (page 14) for further information about the user level.
•When displaying images on a multi-screen, images displayed in all areas of a multi-screen will be controlled
simultaneously using the playback operation panel. 
q[REW] button
Fast reverse playback will be performed.
Playback speed for fast reverse playback will be
changed in the following order each time this but-
ton is clicked: Step2 (Approx. 4x) →Step3
(Approx. 8x) →Step4 (Approx. 16x) →Step5
(Approx. 32x) →Step6 (Approx. 48x) →Step7
(Approx. 96x)
w[PREV RECORD] button
Playback will start after skipping to the previous
recorded image.
e[REV PLAY] button
Reverse playback of a recorded image will be per-
formed.
When this button is clicked during fast playback or
fast reverse playback, reverse playback at normal
speed will start.
Note:
When playing MPEG-4 images, some frames of
recorded images may not be displayed. Reverse
playback will be performed with the set refresh
interval of the camera.
r[PLAY] button
Playback of a recorded image will be performed.
When this button is clicked during fast playback or
fast reverse playback, playback at normal speed
will start.t[NEXT RECORD] button
Playback will start after skipping to the next record-
ed image.
When this button is clicked while playing the latest
recorded image, the current playback will continue.
y[FF] button
Fast playback will be performed.
Playback speed for fast playback will be changed
in the following order each time this button is
clicked: Step2 (Approx. 4x) →Step3 (Approx. 8x)
→Step4 (Approx. 16x) →Step5 (Approx. 32x) →
Step6 (Approx. 48x) →Step7 (Approx. 96x)
u[REV SKIP] button
Playback will start after skipping to the point of the
set amount of time backward.
Notes:
•This button will not work when the playback point is
at the start point or the end point of the recorded
images.
•This button sometimes may not work when the time
and date of the recorded images is around the time
when shifting to daylight saving time.
•When clicking this button while playing MPEG-4
images, a skipped point may be a few seconds
later from a point to be skipped with the selected
amount of time.
u
q
i
w
o
e
!0
r
!1
t
!2
y
!3!4!5 
						

							26
i[PREV IMAGE] button
The previous frame will be displayed when this but-
ton is clicked during pausing.
Note:
When playing MPEG-4 images, some frames of
recorded images may not be displayed. Reverse
frame by frame playback will be performed with the
set refresh interval of the camera.
o[PAUSE] button
Playback will stop when this button is clicked dur-
ing playback. Playback will resume when this but-
ton is clicked during pausing.
!0[STOP] button
Playback will stop and live images will be dis-
played.
!1[NEXT IMAGE] button
The next frame will be displayed when this button
is clicked during pausing.
!2[SKIP] button
Playback will start after skipping to the point of the
set amount of time forward.
Note:
•This button will not work when the playback point is
at the start point or the end point of the recorded
images.
•This button sometimes may not work when the time
and date of the recorded images is around the time
when shifting to daylight saving time.
•When clicking this button while playing MPEG-4
images, a skipped point may be a few seconds
later from a point to be skipped with the selected
amount of time.
!3SKIP TIME
Select an amount of time to skip from the following.
30s/1min/5min/10min/30min/60min!4[TEXT] button
When playing recorded images on a 1-screen, text
information can be added. The Edit text window
will be displayed when this button is clicked during
pausing playback. Refer to page 62 for further
information about the Edit text window. 
!5[REC START]/[REC STOP] button
Manual recording will start or stop. 
						

							27
Camera operation panel
wy
qertu
Notes:
•Operation of the camera operation panel works only for the camera respective the selected image. 
•The camera operation panel will not be displayed when the user is restricted by the user level determined by the
administrator to operate the cameras.
Refer to the About the user level section (page 14) for further information about the user level.
qZoom
Zooming can be adjusted by clicking the [-] (wide)
button or the [+] (tele) button.
wFocus
The auto focus function can be performed by click-
ing the [Auto] button.
Focusing can be manually adjusted by clicking the
[Near] button or the [Far] button.
eAuto mode
Select the auto function from the following.
Auto track:The camera automatically tracks
motion of the subject displayed in the image
display area.
Auto pan:The camera automatically moves from
the start point to the end point set in advance.
Preset sequence:The camera automatically
moves to the preset positions in numerical
order of the preset position numbers.
Sort:The camera automatically moves to the clos-
est preset position from the current position.
Patrol:The camera automatically traces the route
set in advance.
When the [Start] button is clicked, the selected
auto function will start.
When the [Stop] button is clicked, the selected auto
function will stop.
Note:
The auto functions are available only when the
camera in use has these functions. Refer to the
operating instructions of the camera in use for fur-
ther information about the auto function of the cam-
era.
rControl pad
Clicking the buttons around the control pad can
move (pan/tilt) a camera in the clicked direction.
Clicking inside the control pad also can adjust the
vertical/horizontal position (pan/tilt) of the displayed
live images. Panning/tilting speed will be faster if a
clicked point gets farther from the center point of
the control pad.
Note:
Panning and tilting are available only when the
camera in use is a PTZ camera.
tBrightness
Brightness can be adjusted by clicking the [–]
(darker) button or the [+] (brighter) button.
It is possible to reset the set brightness by clicking
the [Reset] button. 
						

							28
yPreset
Select a preset number from the following.
Home/1 - 256
Click the [Go] button after selecting a preset num-
ber. The camera will move to the selected preset
position.
When the [Program] button is clicked after select-
ing a preset number, the current position will be
registered as the preset position of the selected
preset position number.
Notes:
•Preset position function is available only when the
camera in use is a PTZ camera.
•It is impossible to register a position when Home
is selected for the preset position number.
•It is possible to register the preset position only
when the user is not restricted by the user level
determined by the administrator to operate the
cameras.
Refer to the About the user level section (page
14) for further information about the user level.
•Refer to the operating instructions of the recorder
and the camera in use for further information about
the available preset position numbers.
uAUX
Select an AUX OUT connector from the following.
1/2/3
When the [Open] button is clicked, the selected
AUX OUT connector will be opened.
When the [Close] button is clicked, the selected
AUX OUT connector will be closed. 
						

							29
Search window
When Search(S)... under Search(S) on the menu bar is selected or the [Search] icon on the tool bar is clicked,
another window will open and the Search window will be displayed. Search desired recorded images on the
recorder by designating the search conditions on the Search window.
Search by
Select the search target from the following.
Recorder:Select recorders to be searched. When
Recorder is selected, the recorders will be dis-
played in the tree view. Select the recorders and
the cameras to be searched by checking the
checkbox.
Group:Select groups to be searched. When Group
is selected, the group list will be displayed. Select
the groups to be searched by checking the check-
box.
Map:Select maps to be searched. When Map is
selected, the map list will be displayed. Select the
maps to be searched by checking the checkbox.
REC event
Select the recording event type to be searched.
Manual:Select to search for images recorded by man-
ual recording.
Schedule:Select to search for images recorded by
the schedule recording.
Emergency:Select to search for images recorded by
the emergency recording.
Site alarm:Select to search for images recorded upon
the site alarm occurrence.
Terminal alarm:Select to search for images recorded
upon the terminal alarm occurrence.
Command alarm:Select to search for images record-
ed upon the command alarm occurrence.SD memory:Select to search for the SD memory
data.
Note:
Only SD memory is unavailable to select together
with other recording event types. To search for the
SD memory data, select SD memory alone.
Text
It is possible to search for recorded images only with
or without text information.
Select Added or None.
When-- is selected, images will be searched regard-
less of with or without text information. 
Start
Select the start time between Jan/01/2005 and
Dec/31/2034. Select a number for hour from AM12
- PM11. Select a number for minute from 00 - 59.
End
Select the end time between Jan/01/2005 and
Dec/31/2034. Select a number for hour from AM12
- PM11. Select a number for minute from 00 - 59.
Note:
When the software in use is European specifica-
tion, select the start time and the end time from the
following.
Date: Between 01/01/2005 and 31/12/2034
Hour: Between 0 and 23
Minute: Between 00 and 59 (1 minute step)
[OK] button
Click this button to start searching.
[Cancel] button
Click this button to cancel the edited search conditions
and close the Search window.
Search result number
Search result number will be displayed. 
						

							30
Search result list
Search result will be displayed in list form. When a
result is clicked, the Search window will close and
the selected image will be displayed on a 1-screen.
When playback of the selected result starts, the
descriptions of the selected result will be displayed in
the search panel of the operation window.Note:
No image will be displayed when search result
number is 0.
Alarm/error notification
A pop-up window (notification window) will be displayed when an alarm or an error occurred.
Alarm notification
Notifies of an alarm occurrence.Error notification
Notifies of a recorder error occurrence or a network
error occurrence.
Version window
When selecting Version information under Help(H) on the menu bar, version of this software will be displayed.