Panasonic Outdoor Pan Tilt Head Aw Ph650 Operating Instructions

Before attempting to connect, operate or adjust this product,  
please read these instructions completely.
Outdoor Pan/Tilt Head
AW-PH650N
Printed in JapanF0406Y1056 D   VQTB0104-1 

2

 indicates safety information.
This  class  A  digital  apparatus  complies  with 
Canadian ICES-003.
Cet  appareil  numérique  de  la  classe  A  est 
conforme à la norme NMB-003 du Canada.
For CANADA
Safety precautions
CAUTION
RISK OF ELECTRIC SHOCK
 DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
The  lightning  flash  with  arrowhead  symbol, 
within  an  equilateral...

3

 indicates safety information.
  1) Read these instructions.
  2) Keep these instructions.
  3) Heed all warnings.
  4) Follow all instructions.
  5) Do not use this apparatus near water.
  6) Clean only with dry cloth.
  7)  Do  not  block  any  ventilation  openings.  Install  in accordance with the manufacturer’s instructions.
  8)  D o   n o t   i n s t a l l   n e a r   a n y   h e a t   s o u r c e s  
 
such  as  radiators,  heat  registers,  stoves,  or  other 
apparatus (including...

4

Introduction  ....................................................................... 4
Accessories  ...................................................................... 4
Precautions for use
  .......................................................... 4
Installation precautions  ................................................... 5
Mounting (Pan/tilt head)  ................................................... 6  Precautions for installation  .............................................. 6 How to...

5

Installation precautions
   Do not install this unit by suspending it, and do not install it on its side.
   While factoring in the weights of the unit and the load that 
the unit will bear, select an installation location which is 
conducive to fastening the unit securely and which is level 
and without unevenness. Fasten the unit securely so that 
it will not shake or be rickety when it is at rest or being 
rotated. Failure to secure the unit properly or looseness 
of the bolts may cause the...

6

Mounting (Pan/tilt head)
Precautions for installation
   Do not install this unit by suspending it, and do not install it on its side.
   Using the four pan/tilt head mounting holes, fasten the 
unit securely with bolts which are long enough.
    The mounting holes have a diameter of 3/8
”  (10 mm). Use 
sufficiently long bolts with an 5/16” (8 mm) diameter. Do 
not use bolts with a diameter smaller than 5/16” (8 mm). 
Use hexagon head bolts or hexagon socket head bolts, 
for instance, which can...

7

Mounting (AC adapter)
Precautions for installation
   Be sure to use water-proof connecting cables.
 Be sure to keep AC power switched off during installation and connection.
    Before pressing the power switch on, make sure that all parts, including the housing and pan/tilt head, have been installed 
and connected completely and free of errors.
   Do not install the AC adapter at a cold place [below –4°F (–20°C)] or a hot place [over 113°F (45°C)] because extremely low 
or high temperature...

8

Mounting (AC adapter)
  Connect the cables. (Refer to the “Connections”.) 
Make the distance between the AC adapter and pan/tilt head less than the length (30 m) of the power cable supplied.
AC power input
Pole mounting plate
Ventilation opening Pan/tilt head 

9

Parts and their functions
Main unit (Pan/tilt head)
  
  
  
 
 Main unit cover
The sunshade cover and main unit cover must be 
removed when the cable compensation circuit or landing 
characteristics are to be changed.
 Grip
Used in carrying, installing, or lifting the pan/tilt head.
 Sunshade cover
This cover protects the pan/tilt head from direct exposure 
to sunlight. 
 Rotary arm
Mount the housing after having installed the housing 
mount frame.
 I/F connector
Connect this to...

10

Parts and their functions
Housing unit
  


  
  
 Camera housing control board
Connect the supplied camera cable.
 Air filter
Air is taken in through the air filter. Replace it when it is 
clogged up.
 
( Whenever the air filter needs replacement, ask the store  where you purchased the product to do the job.)
 Top cover open/close bolts (2)
Loosen using the supplied Allen key, open the top cover.
 Heater
When the controller’s H/F switch is at ON, the heater will 
come on whenever...