Panasonic Network Disk Recorder Wj Nd300p Operating Instructions

31
Display/Edit the Text Information
It is possible to attach text information to images when recording.
It is possible to enter up to 200 characters for text information.
These are the descriptions of how to display/edit the attached text information to images.
Note:
Displaying/editing text information is possible during pausing playback on a single screen.
Screenshot 1
Start operation after starting playback of recorded
images in a single screen.
Step 1
Pause playback by clicking the [Pause] button....

32
Transmits Camera Images onto an FTP Server
It is possible to transmit images to an FTP server.
Image transmission can be performed at a designated time periodically (FTP SEND BY PERIODIC TIMER) or at an
event occurrence (FTP ALARM SENDING).
Transmit Images from Cameras Periodically
It is necessary to perform the settings on the setup menu in advance to transmit images from cameras to an FTP
server periodically.
The settings relating to FTP SEND BY PERIODIC TIMER such as FTP server directory,...

33
Check Logs
The following logs can be checked.
•Error log
•Access log
•Event log (event occurrence time and details)
•Network trouble log
Check the Error Log
The error log will be displayed in list form.
Screenshot 1
Display the [Control] tab.
Step 1
Click the [Error Log] button in the [Log] box of the
[Control] tab.
Screenshot 2
The error log (the error log window) will be displayed in
list form below the [Control] tab. Refer to page 49 for
further information about the error log.
Step 2
Click the...

34
Check the Access Log
The time when logged in/out for this unit, the user name, and the IP address will be displayed.
Screenshot 1
Display the [Control] tab.
Step 1
Click the [Access Log] button in the [Log] box of the
[Control] tab.
Screenshot 2
The access log (the access log window) will be dis-
played in list form below the [Control] tab.Indications for access log
**IN:The user name or the IP address displayed before
IN indicates the user/host logged in.
**OUT:The user name or the IP address...

35
Check the Event Log
The event logs (event occurrence times and their details) will be displayed.
Refer to page 26 for further information about each event.
Screenshot 1
Display the [Control] tab.
Step 1
Click the [Event Log] button in the [Log] box of the
[Control] tab.
Screenshot 2
The event log (the event log window) will be displayed
in list form below the [Control] tab.Indications for event log
COM:Command alarm
EMR:Emergency recording
TRM:Terminal alarm
CAM:Site alarm
Step 2
Click the [List]...

36
Check the Network Trouble Log
The network log (network event) will be displayed in list form.
Screenshot 1
Display the [Control] tab.
Step 1
Click the [Net Log] button in the [Log] box of the
[Control] tab.
Screenshot 2
The network trouble log (the NW log window) will be dis-
played in list form below the [Control] tab. Refer to page
49 for further information about the network trouble log.
Step 2
Click the [List] button to close the NW log window.
Note:
•Up to 1 000 network trouble logs can be kept....

37
Download Recorded Images
Designate the start point and the end point of played images and download images to a PC.
Recorded images will be downloaded as image data files (filename.n3r). Refer to page 39 for the descriptions of how
to play the downloaded images.
Important:
•When downloading, the available disk space must be 2 or more times the size of the file to be downloaded. 
* It is a feature of Internet Explorer.
•Otherwise, it may be impossible to properly play the downloaded file on a PC....

38
Screenshot 3
The download window will be displayed.
Step 5
Click the [Save] button.
Screenshot 4
The Save as… window will be displayed.
Step 6
Create a new folder in the desired directory and click
the [Save] button.
→Recorded images will be downloaded as image data
files (filename.n3r). 

39
Play Downloaded Images
Recorded images will be downloaded as image data files (filename.h3r). It is possible to play, save and print down-
loaded images using the viewer software provided from this unit to PC.
Download the Viewer Software
Screenshot 1
Display the [HDD] tab.
Step 1
Click the [VIEWER] button of the [Registration] box.
Screenshot 2
The download window will be displayed.
Step 2
Click the [Save] button.
Screenshot 3
The Save as… window will be displayed.
Step 3
Create a new folder in the...

Screenshot 1
The user information entry screen will be displayed.
Step 1
Double-click the downloaded file (n3vsetup.exe).
Step 2
Complete the user information fields and click the [Next]
button.
Note:
User information entry is not required to proceed.
Screenshot 2
The setup type selection screen will be displayed.
Step 3
Select Complete and click the [Next] button.
40
Install the Viewer Software