Panasonic Network Disk Recorder Wj Nd300p Operating Instructions

21
Display Images from Cameras on a 4-Screen
Images from cameras will be displayed on a 4-Screen screen.
Screenshot 1
Display the [Camera Select] tab.
Step 1
Click the button of the [Multiscreen] box.
Screenshot 2
Images from cameras will be displayed on a 4-Screen
screen.
Step 2
Up to 4 camera images can be displayed simultaneous-
ly on a 4-Screen screen.
Each time the button is clicked, the camera picture is
changed to quad display according to the settings made
in [Advanced] – [System] – [Basic Setup]...

22
Display Images in the Sequential Display
Displayed images from cameras will be switched automatically.
Camera images will be displayed sequentially according to the settings performed in advance.
Screenshot 1
Display the [Cam Select] tab.
Step 1
Click the button of the [Sequence] box.
→The lamp on the button lights (green) during
sequence operation.
The sequence action will start and the lamp on the
button will light (green) during sequence operation.
The SEQ indication will also light on the status...

23
Control Cameras
When displaying live images, the following camera controls are possible.
•Panning/tilting: Moves a camera horizontally/vertically.
•Zooming: Zooms in/out of images.
•Focus: Adjusts the focus.
•Iris: Adjusts the iris of the lens.
•Preset action: Moves a camera to the preset position registered in advance.
•Auto: Moves a camera with an auto function set in advance.
Note:
•Depending on the models of the connected cameras, it may be impossible to control the camera or some func-
tions may...

24
Zoom/Focus/Iris Operations
Zooming:Zooms in/out of images. Depending on the models of the connected cameras, the image size for the
respective zooming portion may be different. For further information, refer to the operating instructions of the
camera.
Focus adjustment:Adjusts the focus. The auto focus function is available.
Iris adjustment:Adjusts the iris of the lens. Adjusts the iris of the lens. 
Screenshot 1
Display the [CAM] tab.
Step 1
• Zooming
Adjust zooming by clicking the [Wide] button or...

25
Move a Camera to the Preset Position
Moves a camera to the preset position registered in advance. Registering preset positions is required to perform the
preset function.
Refer to the operating instructions of the connected camera for the descriptions of how to register the preset posi-
tion. It is impossible to register the preset positions of cameras using this unit.
Auto Function (Auto Pan, etc)
Moves a camera with an auto function set in advance.
Screenshot 1
Display the [CAM] tab.
Step 1
Click...

26
About the Event Function
The event action will be performed when the following events occur.
•Terminal alarm: When a signal is supplied from an external device such as a door sensor to the ALARM
terminal, this is stated as an event of a terminal alarm.
•Command alarm: A command alarm is sent from a PC via a network.
•Site alarm: An alarm using Panasonic Alarm Protocol is sent from a network camera.
Action at an Event Occurrence
The event action will be performed according to the settings when an event...

27
About the alarm action
• Start recording.
Recording will start at an event occurrence. Recording will be performed according to the settings such as
recording duration, recording rate, etc. that were configured on the setup menu. (Refer to the Setup Instructions
(PDF) for further information.)
Depending on the settings, it is possible to start recording images before an event occurs (Pre-event recording).
• Displays alarm message.
The pop-up window that notifies of an event occurrence will be...

28
Cancel the Alarm Action
The alarm action will be performed when an event is detected.
To cancel the alarm action manually, do the following.
Screenshot 1
[ALARM RESET] will be displayed in the status display
area when an alarm occurs.
Step 1
Click the [ALARM RESET] button.
→The alarm action will be canceled.
Suspend the Alarm Action
Configure the settings to not to perform the alarm action even when an event occurs. It is useful to suspend the
alarm action at an event occurrence such when maintaining...

29
Copying (Duplicate)
Images recorded on the normal area/event area can be copied manually onto the copy area of the hard disk drive.
It is recommended to make back-up copies on a regular basis for unexpected situations such as malfunction of the
hard disk. Manual copy is available during the following.
•While displaying live images
•While playback or pausing playback of recorded images
Screenshot 1
Display the [Control] tab.
Step 1
Click a button in the [Copy] box of the [Control] tab.
Note:
It is...

30
Deletion of Recorded Images Saved on the Hard Disk Manually
Screenshot 1
Click the [Maintenance] button in the setup menu
(Advanced) and then click Data Delete. The Data
Delete window will be displayed. 
Step 1
Set time and date for any of Manual Delete for Normal
Recording Area, Manual Delete for Event Recording
Area or Manual Delete for Copy Area by clicking [i].
Images recoded before the set time and date will be
deleted.
Step 2
Click the [DELETE] button.
Screenshot 2
The confirmation window will...