Panasonic Network Disk Recorder Wj Nd300a Operating Instructions

11
About the recording mode and the priority
There are 5 recording modes. Each recording mode and priority is as follows.
When two or more recordings with different recording modes started simultaneously, only recording with the highest
priority will start.
Recording Mode
Emergency 
recording
Post-event recording
Manual recording
Schedule recording
Pre-event recordingDescription
When an emergency event occurs, perform recording manually using an
external switch, etc.. 
Perform recording manually at any...

12
Playback
A recorded image can be played. Playback is also available during recording.
Screenshot 1
Display the [HDD] tab.
Step 1
Click the [PLAY] button.
→Playback of a recorded image will be performed.
will be displayed in the status display area.
Playback will start from the finish point (time and
date) of the last playback.
Notes:
•When played for the first time after login, the latest
recorded image will be played. Playback will start 30
seconds before the time of the latest recorded image
with...

13
Other functions for playback
Pausing
Frame play/reverse
frame play
Fast playback/fast
reverse playback•Playback will be stopped when this button is clicked during
playback.
•Playback will be resumed when this button is clicked during
pausing.
•Frame play/reverse frame play is available only during paus-
ing.
•When the [NEXT IMAGE] button is clicked, the next frame is
played and paused.
•When the [PREV IMAGE] button is clicked, the previous frame
is played and paused.
Note:
When the image currently...

Playback on a multi-
screen
Text
(page 34)
EL-Zoom•Displays playback images on a 4-Screen.
•Up to 4 camera images can be displayed simultaneously on a
4-Screen screen.
Images of the camera group (A-H) consisted from 4 camera
channels in advance will be switched and displayed sequen-
tially on a 4-Screen screen. 
Refer to the Setup Instructions (PDF) for descriptions of how
to perform the camera group settings.
•Click a camera title in the [Cam Select] tab or the camera title
displayed on the image to...

15
A-B Repeat Playback
Zoom InRecorded images between two designated points (point A: start
point, point B: end point) will be played repeatedly.
qDesignate a start point (A) by clicking the [Start] button during
playback.
→The time and date of point A will be displayed next to the
[Start] button.
wDesignate an end point (B) by clicking the [End] button during
playback.
→The time and date of point B will be displayed next to the
[End] button.
ePlayback between point A and B will start and keep playing...

16
Images from cameras will be recorded on the built-in hard disk drive of this unit.
Select a disk and play images as follows.
The following disks can be selected.
• HDD normal recording area/event recording area:Recording area in the built-in hard disk of this unit. Recorded
images by manual recording (page 10), event recording or SD memory data will be stored in this area.
• HDD copy area:Copy area in the built-in hard disk of this unit. Recorded images will be copied in this area. (page
31)
Notes:...

17
Screenshot 2
The selected disk will be displayed on the status display
area.
Step 3
Click the [HDD] tab.
Screenshot 3
The [HDD] page will be displayed.
Step 4
Click the [PLAY] button.
→Recorded images on the selected disk will be
played.  will be displayed in the status display
area.
Note:
Playback will start from the finishing point (time and
date) of the last playback by clicking the [PLAY] but-
ton after stopping playback.
Step 5
Click the [STOP] button to stop playback.
→displayed in the status...

18
Playback from a Designated Time and Date
Start playback by designating the desired time and date of a recorded image to be played. Playback is also available
during recording.
Screenshot 1
Click the [GO TO DATE] button in the playback point
operation area after selecting the desired camera chan-
nel to display the GO TO DATE window.
Step 1
Click the [i] button and enter the desired time and
date of a recorded image to be played.
• Standard CH
Determine which camera channel is to be used as a
standard...

19
Search and Play Recorded Event
Search for a recording event and play it (recording event search)
Recording events can be searched by filtering as follows.
Note:
Area of the hard disk drive subject to search for recording events is different depending on the disk area. To
search for recording events in the HDD normal recording area and event recording are, select NORMAL AREA
or EVENT AREA. To search for recorded images in the copy area, select COPY AREA. 
Refer to page 16 for further information about...

20
How to Operate
Screenshot 1
Click the [Search] button in the [Search] box of the
[Control] tab. The REC Event Search window is dis-
played.
Step 1
Select searching conditions
• Time & Date
Filter by time and date. Select a start time and an end
time by clicking the [i] button.
• REC Events
Filter by recording event. Click to select the desired
recording event to be displayed when filtering by record-
ing events.
• Standard CH
Determine which camera channel is to be used as a
standard time zone when...