Panasonic Network Disk Recorder Wj Nd300 Operating Instructions

							Screenshot 2
The search processing window will be displayed, and
then the search result will be displayed. 
Step 2
Click the icon of the recorder/camera whose settings
are to be checked.
Notes:
• When + displayed on the left of the recorder icon is
clicked, the icons of the camera registered already
or detected newly will be displayed.
• When the PC and multiple recorders are on the
same network, multiple icons (up to 16) will be dis-
played.
• Order of the recorder icon displayed in the tree dis-
play area will change each time search is executed.
11
Detect recorders/cameras and confirm the current settings
Screenshot 1
Start operation when displaying the main window.
Step 1
Click the [Search] button.
The detected recorders/cameras will be displayed with icons.
The current network settings of the selected recorder/camera will be displayed in the network setting area. 
						

							12
Screenshot 3
The network settings of the selected recorder/camera
will be displayed.
Notes:
• When ON is selected for the host authentication
function on the recorder, it is impossible to search
recorders using a PC that is not allowed to edit the
network settings of the recorder.
• When search is executed by multiple PCs simultane-
ously, cameras may not be searched correctly. 
						

							13
Arrange the camera number by moving/deleting the camera icon
The camera numbers will be assigned to each camera channel of the recorder in order of the camera icons dis-
played in the tree display area. 
The camera numbers can be changed by changing the order of the icons in the tree display area.
By deleting the icons of the cameras from the tree display area, the deleted camera will not be registered. It will be
useful to prevent registering unwanted cameras.
Move a camera icon
Screenshot 1
Start operation when the search result is displayed on
the main window.
Step 1
Drag the desired camera icon and drop to the desired
point. (Dropped between 6 and 7 on screenshot 2.) 
Note:
Moving and copying the icon is unavailable when the
respective camera is registered with the host name.
Screenshot 2
The camera icon will be moved.
Note:
When multiple recorder icons are displayed, the
camera icon can be copied onto the other recorder
by drag and drop. 
						

							14
Delete a camera icon
Screenshot 1
Start operation when the search result is displayed on
the main window.
Step 1
Click to select the icon of the camera not to be used
with the recorder.
Screenshot 2
The settings of the selected camera will be displayed.
Step 2
Click the [Delete] button.
Step 3
Click the [OK] button when the confirmation window is
displayed. 
						

							15
Screenshot 3
The selected camera icon will be deleted.
Notes:
• When the selected icon is deleted, the camera icons
below the deleted icon will move up.
However, the camera number of the camera regis-
tered with the host name (displayed with  ) will
not be changed.
• When the [Delete] button is clicked after selecting
the recorder icon with  , the selected recorder
icon will be deleted from the tree display area.
Important:
When the camera number is changed once, the set-
tings such as the recording rate will become OFF
after registration. It is necessary to configure the set-
tings again. 
						

							16
Edit the settings
Edit the network settings of the recorder/camera such as IP address.
Screenshot 1
Start operation when the search result is displayed on
the main window.
Step 1
Edit the network settings of the recorder/camera such
as IP address.
Step 2
Click the [Set] button after editing the settings.
Notes:
• It is possible to cancel the settings edited in step 1
and return to the previous settings by clicking the
[Clear] button when the [Set] button is not clicked
yet. 
• When the settings are changed once, the respective
camera icon will turn to the edited icon ( ).
• To register the newly detected camera ( ) with-
out changing the network settings, click the [Set]
button without changing the settings and display the
edited icon ( ).
The camera respective to the edited icon will be reg-
istered in the recorder.
• When IP addresses are to be automatically
assigned, do not change the settings of the cam-
eras. When the camera settings are changed, the
[CAM IP Auto Addressing] button will become
unavailable. In this case, click the [Search] button
again.
• When the recorder settings are edited, registration
will be unavailable until the [Set] button or the [Clear]
button is clicked. 
						

							17
Register the recorder and cameras, and confirm
the result (CAM IP Auto Addressing)
Register the edited settings in the recorder and the automatically assigned IP addresses in the cameras.
Screenshot 1
Start operation when the search result is displayed on
the main window.
Step 1
Select the icon of the recorder to be registered.
Step 2
Click the [CAM IP Auto Addressing] button.
Note:
Select OFF for the DHCP setting of CAM Port in
advance since the [CAM IP Auto Addressing] button
will become unavailable if ON is set.
Step 3
Click the [OK] button when the confirmation window is
displayed.
Important:
• Automatically incremented value (+1) starting from
the IP address of the camera port of the recorder will
be assigned to the cameras orderly.
The subnet should be 255.255.255.0 since the
value will be determined at the fourth octet of the IP
address. When the subnet cannot be not
255.255.255.0, register recorders/cameras manu-
ally.
The cameras displayed in the tree display area are
subject to be registered in the recorder using CAM
IP Auto Addressing. Delete unwanted cameras in
advance.
• Any recording currently being performed on the
recorder will stop in the process of CAM IP Auto
Addressing.
• The model WV-NS202 accepts Manual
Registration only.
Notes:
• IP addresses will not automatically be assigned to
cameras that are not applicable with this software
( ) and cameras registered with the host name
().
• IP addresses can automatically be assigned to up to
32 cameras.  
						

							18
Screenshot 2
The registration processing window will be displayed,
and then the registration result will be displayed.  
						

							Screenshot 1
Start operation when the search result is displayed on
the main window.
Step 1
Select the icon of the recorder to be registered.
Step 2
Click the [Manual Registration] button.
Step 3
Click the [OK] button when the confirmation window is
displayed.
Important:
• To register the newly detected camera ( ) in the
recorder, the camera icon should be the edited icon
( ). (page 16)
• Any recording currently being performed on the
recorder will stop in the process of Manual
Registration.
Notes:
• Edit of the settings of the cameras that are not
applicable with this software ( ) and of the cam-
eras registered with the host name ( ) is
unavailable.
• IP addresses can automatically be assigned to up to
32 cameras. 
19
Register the recorder and cameras, and confirm
the result (Manual Registration)
Register the edited settings in the recorder and the camera. When not registered, the edited settings will not be
applied to the recorder. 
						

							20
Screenshot 2
The registration processing window will be displayed,
and then the registration result will be displayed. 
Step 4
Confirm the registration result. Display live images from
the camera and confirm that they are normally dis-
played. 
Notes:
• Display live images from the camera and confirm
that they are normally displayed. The live image
transmission rate is set to 1 ips on the recorder.
The image compression method of the camera is set
to JPEG or M-JPEG.
• The recording rate, camera title, and user
name/password of the camera will return to the
default when the already registered camera is regis-
tered again. It is necessary to configure them again.
• The deleted camera icon will be displayed as the
newly detected icon ( ) after registration. (Not
registered in the recorder)