Home > Panasonic > Security Camera > Panasonic Network Camera Wv Sw314 Wv Sw316 Installation Guide

Panasonic Network Camera Wv Sw314 Wv Sw316 Installation Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Network Camera Wv Sw314 Wv Sw316 Installation Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 
    The model number is abbreviated in some descriptions in this manual.
    Installation Guide
    Network Camera
    Model No. WV-SW316L/WV-SW316  WV-SW314 
    WV-SW316LE/WV-SW316E
    (This illustration represents WV-SW316.) 
    						
    							2
    WARNING:
    •  To prevent injury, this apparatus must be securely attached to the floor/wall/ceiling in 
    accordance with the installation instructions.
    •  The installation shall be carried out in accor -
    dance with all applicable installation rules.
    •
      The connections should comply with local 
    electrical code.
    The model number and serial number of this 
    product may be found on the surface of the unit.
    You should note the model number and serial 
    number of this unit in the space provided and 
    retain this book as a permanent record of your 
    purchase to aid identification in the event of 
    theft.
      Model No. 
      Serial No.
    NOTE: This equipment has been tested and 
    found to comply with the limits for a Class A digi-
    tal device, pursuant to Part 15 of the FCC Rules. 
    These limits are designed to provide reasonable 
    protection against harmful interference when the 
    equipment is operated in a commercial environ-
    ment. This equipment generates, uses, and can 
    radiate radio frequency energy and, if not installed 
    and used in accordance with the instruction man-
    ual, may cause harmful interference to radio com-
    munications.
    Operation of this equipment in a residential area 
    is likely to cause harmful interference in which 
    case the user will be required to correct the inter -
    ference at his own expense.
    FCC Caution: To assure continued compliance, 
    (example - use only shielded interface cables 
    when connecting to computer or peripheral 
    devices). Any changes or modifications not 
    expressly approved by the party responsible for 
    compliance could void the user’s authority to 
    operate this equipment.
    For U.S.A
    For U.S.A
    This Class A digital apparatus complies with 
    Canadian ICES-003.
    For Canada
    UL listed model No.
    WV-SW316L, WV-SW316, WV-SW314
    For U.S. and Canada:
    WV-SW316L, WV-SW316, WV-SW314
    For Europe and other countries:
    WV-SW316LE, WV-SW316E
    We declare under our sole responsibility that the 
    product to which this declaration relates is in 
    conformity with the standard or other normative 
    document following the provisions of Directive 
    2004/108/EC.
    Wir erklären in alleiniger Verantwortung, daß das 
    Produkt, auf das sich diese Erklärung bezieht, mit der 
    folgenden Norm oder normativen Dokument 
    übereinstimmt. Gemäß den Bestimmungen der 
    Richtlinie 2004/108/EC.
    Nous déclarons sous notre propre responsabilité que le 
    produit auquel se réfère la présente déclaration est 
    conforme á la norme spécifiée ou à tout autre 
    document normatif conformément aux dispositions de 
    la directive 2004/108/CE.
    Nosotros declaramos bajo nuestra única 
    responsabilidad que el producto a que hace referencia 
    esta declaración está conforme con la norma u otro 
    documento normativo siguiendo las estipulaciones de 
    la directiva 2004/108/CE.
    Noi dichiariamo sotto nostra esclusiva responsabilità 
    che il prodotto a cui si riferisce la presente 
    dichiarazione risulta conforme al seguente standard o 
    altro documento normativo conforme alle disposizioni 
    della direttiva 2004/108/CE.
    Wij verklaren als enige aansprakelijke, dat het product 
    waarop deze verklaring betrekking heeft, voldoet aan 
    de volgende norm of ander normatief dokument, 
    overeenkomstig de bepalingen van Richtlijn 2004/108/
    EC.
    Vi erklærer os eneansvarlige for, at dette produkt, som 
    denne deklaration omhandler, er i overensstemmelse 
    med standard eller andre normative dokumenter i følge 
    bestemmelserne i direktiv 2004/108/EC.
    Vi deklarerar härmed vårt fulla ansvar för att den 
    produkt till vilken denna deklaration hänvisar är i 
    överensstämmelse med standarddokument eller annat 
    normativt dokument som framställs i direktiv 2004/108/
    EC.
    Ilmoitamme yksinomaisella vastuullamme, että tuote, 
    jota tämä ilmoitus koskee, noudattaa seuraavaa 
    standardia tai muuta ohjeellista asiakirjaa, jotka 
    noudattavat direktiivin 2004/108/EC säädöksiä.
    Vi erklærer oss alene ansvarlige for at produktet som 
    denne erklæringen gjelder for, er i overensstemmelse 
    med følgende norm eller andre normgivende 
    dokumenter som følger bestemmelsene i direktiv 
    2004/108/EC.For Europe 
    						
    							3
    Contents
    Important safety instructions ........................................................................\
    ................................. 4
    Limitation of liability  ........................................................................\
    ............................................... 5
    Disclaimer of warranty  ........................................................................\
    ........................................... 5
    Preface  ........................................................................\
    .................................................................. 5
    About notations  ........................................................................\
    ..................................................... 6
    Main functions  ........................................................................\
    ....................................................... 6
    About the user manuals  ........................................................................\
    ........................................ 7
    System requirements for a PC  ........................................................................\
    .............................. 7
    Trademarks and registered trademarks........................................................................\
    ................. 8
    Copyright  ........................................................................\
    ............................................................... 8
    Network security  ........................................................................\
    ................................................... 9
    Precautions  ........................................................................\
    ......................................................... 10
    Precautions for installation  ........................................................................\
    .................................. 14
    Major operating controls  ........................................................................\
    ..................................... 16
    Preparations  ........................................................................\
    ........................................................ 19
    Installations / Connections  ........................................................................\
    .................................. 20
    Insert/remove an SDHC/SD memory card (WV-SW316L/WV-SW316 Only)  ............................... 28
    Adjustment  ........................................................................\
    .......................................................... 29
    Mounting the front cover  ........................................................................\
    ..................................... 33
    Attaching the mounting surface on the top surface of the camera body.................................... 34 Using the CD-ROM  ........................................................................\
    ............................................. 37
    Configure the network settings  ........................................................................\
    ........................... 40
    Troubleshooting  ........................................................................\
    ................................................... 42
    Specifications  ........................................................................\
    ...................................................... 43
    Standard accessories  ........................................................................\
    .......................................... 48
    Optional accessories  ........................................................................\
    ........................................... 48 
    						
    							4
    Important safety instructions
      1)  Read these instructions.
      2)  Keep these instructions.
      3)  Heed all warnings.
      4)  Follow all instructions.
      5) Do not block any ventilation openings. Install in accordance with the manufacturer's instruc-
    tions.
      6)  Do not install near any heat sources such as radiators, heat registers, stoves, or other appara-
    tus (including amplifiers) that produce heat.
      7)  Only use attachments/accessories specified by the manufacturer.
      8)  Use only with the cart, stand, tripod, bracket, or table specified by th\
    e manufacturer, or sold 
    with the apparatus. When a cart is used, use caution when moving the car\
    t/apparatus combi-
    nation to avoid injury from tip-over.
    S3125A
      9)  Unplug this apparatus during lightning storms or when unused for long pe\
    riods of time.
     10) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has 
    been damaged in any way, such as power-supply cord or plug is damaged, liquid has been 
    spilled or objects have fallen into the apparatus, the apparatus has bee\
    n exposed to rain or 
    moisture, does not operate normally, or has been dropped. 
    						
    							5
    Limitation of liability
    THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER 
    EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
    MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF 
    THE THIRD PARTY'S RIGHT.
    THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL 
    ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE 
    IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
        
    Disclaimer of warranty
    IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY P\
    ARTY OR ANY 
    PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, 
    FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:
     (1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, 
    SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE 
    PRODUCT;
     (2)  PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT 
    OPERATION OF THE USER;
     (3)  ALL MALFUNCTIONS OR TROUBLES FROM UNAUTHORIZED DISASSEMBLE, REPAIR OR 
    MODIFICATION OF THE PRODUCT BY THE USER, REGARDLESS OF THE CAUSE OF THE 
    MALFUNCTION OR TROUBLE;
     (4)  INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO 
    ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
     (5)  ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING 
    OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;
     (6)  ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION 
    BEING A PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF 
    THAT SURVEILLANCE-CAMERA'S PICTURE, INCLUDING SAVED DATA, FOR SOME 
    REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE;
     (7)  LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE.
    The network camera WV-SW316L/WV-SW316/WV-SW314 is designed to operate using a PC on a 
    network (10BASE-T/100BASE-TX), and can be installed outdoors. 
    By connecting to a network (LAN) or the Internet, images and audio from the camera can be moni-
    tored on a PC via a network. 
    Note:
    	 •	 It	 is	 necessary	 to	 configure	 the	 network	 settings	 of	 the	 PC	 and	 its	 network	 environment	 to	 monitor images from the camera on the PC. It is also necessary to install a web browser on the 
    PC. 
        
    Preface 
    						
    							6
    Main functions
    Super Dynamic
    (
    ☞ Operating Instructions (included in the CD-ROM))
    Super Dynamic compensates brightness on a pixel-to-pixel basis so that i\
    t produces clearer images 
    even if objects have various illumination intensities. 
    H.264/MPEG-4 and JPEG triple encoding
    H.264/MPEG-4 dual stream output and JPEG (MJPEG) output can be simultaneously provided.
    *  Either H.264 or MPEG-4 is selectable. 
    Auto focus (AF) function 
    SW316L SW316
    It is possible to adjust the focus automatically by moving the focus rin\
    g of the lens with the opera-
    tion button of this camera or the setup menu.
    Black & white mode 
    SW316L SW316
    Images will be displayed clear even at night since the camera will be aut\
    omatically switched from 
    the color mode to the black and white mode under low illumination condit\
    ion. 
    Motorized varifocal lens equipped 
    SW316L SW316
    The zoom ratio can be changed and adjusted to an optional photographic a\
    rea through the opera-
    tion buttons on this unit and the setup menu.
    IR LED equipped 
    SW316LThe equipped infrared LED makes it possible to take pictures at zero lx.
    Power over Ethernet function
    When connecting with a PoE (Power over Ethernet) device, power will be supplied by simply con-
    necting a LAN cable. (IEEE802.3af compliant)
    Interactive communication with audio 
    SW316L SW316
    By using the audio output connector and the microphone in connector, receiving audio from the 
    cameras on a PC and transmitting audio from the PC to the cameras is available. 
    SDHC/SD memory card slot equipped 
    SW316L SW316
    It is possible to save H.264 videos and JPEG images on the SDHC/SD memory\
     card manually at 
    an alarm occurrence, during the period of the schedule, or on a web browser. It is also possible to 
    save JPEG images at a network failure occurrence. (Download is possible.)
    (Recommended SDHC/SD memory card 
    ☞ page 47)
    About notations
    The following notations are used when describing the functions limited for specified models. The 
    functions without the notations are supported by all models.
    SW316L : The functions with this notation are available when using the model WV-SW316L.
    SW316 : The functions with this notation are available when using the model WV-SW316.
    SW314 : The functions with this notation are available when using the model WV-SW314. 
    						
    							7
    About the user manuals
    There are 2 sets of operating instructions for the WV-SW316L, WV-SW316, WV-SW314 (P model), 
    WV-SW316LE, WV-SW316E (E model) as follows.
    	 •	 Installation	Guide:	Explains	how	to	install	and	connect	devices.
    	 •	 Operating	 Instructions	 (included	 in	 the	 CD-ROM):	 Explains	 how	 to	 perform	 the	 settings	 and	how to operate this camera. 
    Adobe
    ® Reader® is required to read these operating instructions on the provided CD-ROM.
    When the Adobe Reader is not installed on the PC, download the latest Ad\
    obe Reader from the 
    Adobe web site and install it. 
    "WV-SW316L, WV-SW316, WV-SW314" or "SW316L, SW316, SW314" shown in the instructions 
    and illustrations used in these operating instructions indicates the WV-SW316L, WV-SW316, 
    WV-SW314, WV-SW316LE, WV-SW316E.
    The screens used in these operating instructions show the cases of P models. 
    System requirements for a PC
    CPU:  Intel® CoreTM 2 Duo 2.4 GHz or faster recommended
    Memory:  512 MB or more (A minimum of 1 GB memory is required when using 
    Microsoft
    ® Windows® 7 or Microsoft® Windows Vista®.)
    Network interface:  10BASE-T/100BASE-TX 1 port
    Audio interface:  Sound card (when using the audio function)
    Monitor:  Image capture size: 1024 x 768 pixels or more
      Color: 24-bit True color or better
    OS:  Microsoft
    ® Windows® 7
      Microsoft® Windows Vista®
     Microsoft® Windows® XP SP3
    Web browser:  Windows® Internet Explorer® 9.0 (32-bit)
      Windows® Internet Explorer® 8.0 (32-bit)
      Windows® Internet Explorer® 7.0 (32-bit)
      Microsoft® Internet Explorer® 6.0 SP3
    Others:  CD-ROM drive
      (It is necessary to read the operating instructions and use the software on 
    the provided CD-ROM.)
      DirectX
    ® 9.0c or later
      Adobe® Reader®
     (It is necessary to view the PDF file on the provided CD-ROM.)
         
    						
    							8
    IMPORTANT:
    	 •	 When	 using	 a	 PC	 that	 does	 not	 meet	 the	 above	 requirements,	 displaying	 of	 images	 may	 become slower or the web browser may become inoperable.
    	 •	 Microsoft	 Windows	 7	 Starter,	 Microsoft	 Windows	 Vista	 Starter	 and	 Microsoft	 Windows	 XP	 Professional 64-bit Edition are not supported.
    	 •	 When	using	IPv6	for	communication,	use	Microsoft	Windows	7	or	Microsoft	Windows	Vista.
    Note:
    	 •	 For	 further	 information	 about	 PC	 system	 requirements	 and	 precautions	 for	 when	 using	 Microsoft Windows 7, Microsoft Windows Vista, or Windows Internet Explorer, click "Manual" - 
    "Open" from the supplied CD-ROM and refer to "Notes on Windows
    ® / Internet Explorer® 
    versions".
    	 •	 If	using	Microsoft	Windows	 X P,	screen	tearing*	may	occur	when	the	shooting	scene	drastically	
    changes (for example, while shooting fast-moving subjects) due to the GDI restrictions of the 
    OS. 
       * A phenomenon in which portions of the screen are displayed out of alignment
    	 •	 For	 information	 on	 the	 operation	 verification	 of	 the	 supported	 operating	 systems	 and	 web	 browsers, refer to our website at http://panasonic.net/pss/security/support/index.h\
    tml.
        
    Trademarks and registered trademarks
    	 •	 Adobe,	 the	 Adobe	 logo,	 and	 Reader	 are	 either	 registered	 trademarks	 or	 trademarks	 of	 Adobe	
    Systems Incorporated in the United States and/or other countries. 
    	 •	 Microsoft,	 Windows,	 Windows	 Vista,	 Internet	 Explorer,	 ActiveX,	 and	 DirectX	 are	 either	 regis-
    tered trademarks or trademarks of Microsoft Corporation in the United States and/or other 
    countries.
    	 •	 Microsoft	product	screen	shot(s)	reprinted	with	permission	from	Microsoft	Corporation.
    	 •	 Intel	 and	 Intel	 Core	 are	 trademarks	 or	 registered	 trademarks	 of	 Intel	 Corporation	 or	 its	 subsid-
    iaries in the United States and other countries.
    	 •	 SDHC	Logo	is	a	trademark	of	SD-3C,	LLC.
    	 •	 iPad,	 iPhone,	 and	 iPod	 touch	 are	 trademarks	 of	 Apple	 Inc.,	 registered	 in	 the	 U.S.	 and	 other	
    countries.
    	 •	 Android	is	a	trademark	of	Google	Inc.	Use	of	this	trademark	is	subject	to	Google	Permissions.
    	 •	 All	other	trademarks	identified	herein	are 	the	property	of	their	respective	owners.
    Copyright
    Distributing, copying, disassembling, reverse compiling and reverse engineering of the software 
    provided with this product are all expressly prohibited. In addition, exporting any software provided 
    with this product violating export laws is prohibited. 
         
    						
    							9
    Network security
    As you will use this unit connected to a network, your attention is call\
    ed to the following security 
    risks. 
     q  Leakage or theft of information through this unit
      w  Use of this unit for illegal operations by persons with malicious intent\
      e  Interference with or stoppage of this unit by persons with malicious intent
    It is your responsibility to take precautions such as those described below to protect yourself 
    against the above network security risks. 
    	 •	 Use	this	unit	in	a	network	secured	by	a	firewall,	etc.
    	 •	 If	this	unit	is	connected	to	a	network	that	includes	PCs,	make	sure	that	the	system	is	not	infect- ed by computer viruses or other malicious entities (using a regularly updated anti-virus pro-
    gram, anti-spyware program, etc.).
    	 •	 Protect	your	network	against	unauthorized	access	by	restricting	users	to	those	who	log	in	with	 an authorized user name and password. 
    	 •	 Apply	measures	such	as	user	authentication	to	protect	your	network	against	leakage	or	theft	of	 information, including image data, authentication information (user nam\
    es and passwords), 
    alarm mail information, FTP server information and DDNS server informati\
    on.
    	 •	 After	the	unit	is	accessed	by	the	administrator,	make	sure	to	close	the	browser.	
    	 •	 Change	the	administrator	password	periodically.	
    	 •	 Do	 not	 install	 the	 camera	 in	 locations	 where	 the	 camera	 or	 the	 cables	 can	 be	 destroyed	 or	 damaged by persons with malicious intent. 
         
    						
    							10
    Precautions
    Refer installation work to the dealer.
    Installation work requires technique and experi-
    ences. Failure to observe this may cause fire, 
    electric shock, injury, or damage to this product. 
    Be sure to consult the dealer. 
    Stop the operation immediately when 
    something is wrong with this product. 
    When smoke goes up from the product, the 
    smell of smoke comes from the product, or the 
    exterior of the product has deteriorated, contin-
    ued use will cause a fire or fall of the product 
    resulting in injury, accidents, or damage to the 
    product. 
    Turn the power off immediately and contact 
    qualified service personnel for service. 
    Do not attempt to disassemble or modify 
    this product. 
    Failure to observe this may cause fire or electric 
    shock. 
    Consult the dealer for the repair or inspections. 
    Do not insert any foreign objects. 
    This could permanently damage this product.
    Turn the power off immediately and contact 
    qualified service personnel for service. 
    Select an installation area that can sup-
    port the total weight. 
    Selecting an inappropriate installation surface 
    may cause this product to fall down or topple 
    over, resulting in injury. 
    Installation work shall be started after sufficient 
    reinforcement. 
    Periodic inspections shall be conducted. 
    Rust on the metal parts or screws may cause a 
    fall of the product resulting in injury or acci-
    dents. 
    Consult the dealer for the inspections.  
    Do not use this product in an inflammable 
    atmosphere.
    Failure to observe this may cause an explosion 
    resulting in injury. Avoid installing this bracket in the loca-
    tions where salt damage occurs or corro-
    sive gas is produced. 
    Otherwise, the mounting portions will deterio-
    rate and accidents such as a fall of the product 
    may occur. 
    Do not install this product in locations 
    subject to vibration. 
    Loosening of mounting screws or bolts may 
    cause a fall of the product resulting in injury.
    Install this product in a location high 
    enough to avoid people and objects from 
    bumping the product. 
    Failure to observe this may cause a drop result-
    ing in injury or accidents. 
    Do not strike or give a strong shock to this 
    product.
    Failure to observe this may cause fire or injury.
    Turn the power off when do wiring of this 
    product. 
    Failure to observe this may cause electric 
    shock. In addition, short circuit or wrong wiring 
    may cause fire. 
    The exclusively designed mount bracket 
    shall be used.
    Failure to observe this may cause a drop result-
    ing in injury or accidents.
    Use the exclusively designed mount bracket for 
    installation.
    The screws and bolts must be tightened to 
    the specified torque.
    Failure to observe this may cause a drop result-
    ing in injury or accidents.
    Do not rub the edges of metal parts with 
    your hand. 
    Failure to observe this may cause injury.  
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Network Camera Wv Sw314 Wv Sw316 Installation Guide