Panasonic Network Camera Wv Sw152 Wv Sw155 Installation Guide

31
z Attach the dome cover to the camera by using the tamperproof screw bit (accessory) to tighten 
the 3 dome cover fixing screws (M3).
x  Close the screw cover.
 
c  Remove the cover film completely.
Important: 
  •  When attaching the dome cover the focus may be slightly disturbed. If this occurs, remove the  dome cover and make the necessary adjustments.
  •  Before attaching the dome cover, make sure that the subject is present.
  •  Securely tighten all the fixing screws (x3) of dome cover....

32
About the CD launcher
Insert the provided CD-ROM into the CD-ROM drive of your PC to display the CD launche\
r win-
dow.
  •  If  the  launcher  window  is  not  displayed,  double  click  the  "CDLauncher.exe"  file  on  the CD-ROM.
Using the supplied CD-ROM, the following actions can be performed.
  q  The Panasonic IP setting software can be installed on the PC.
       → Refer to "Installing Panasonic IP setting software". (
☞ Page 33)
 w Settings related to the camera's network...

33
Installing Panasonic IP setting software
On the CD launcher window, click the [Install] button next to [IP Setting Software] to display the 
Panasonic IP setting software installation window. Confirm the following settings before starting the 
installation.
 q Select the Panasonic IP setting software to install.
 w Select where to create the Panasonic IP setting shortcut icon when the Panasonic IP settin\
g software is installed.
 e Specify which folder on the PC to install the Panasonic IP setting...

34
Installing the manuals
On the CD launcher window, click the [Install] button next to [Manual] to display the Manual inst\
alla-
tion window. Confirm the following settings before starting the installation.
 q Select which manuals to install. The camera models that the manuals supp\
ort are displayed in w "Supported Camera Models".
 w The camera models that are supported by the manuals selected in q are displayed here.
 e Select where to create the manuals shortcut icon when the manuals are...

35
Configure the network settings of the camera using the 
Panasonic IP setting software
It is possible to perform the network settings of the camera using the I\
P setup software on the pro-
vided CD-ROM. When using multiple cameras, it is necessary to configure the network settings of 
each camera independently. 
If the Panasonic IP setting software does not work, configure the network settings of the camera 
and the PC individually on the "Network" page of the setup menu. Refer t\
o the...

36
Note:
  •  When using a DHCP server, the IP address assigned to the camera can be displayed by click- ing the [Search] button of the IP setting software. 
  •  When  a  duplicate  IP  address  is  used,  the  corresponding  camera  number  will  be  displayed  shaded. 
  •  When  the  [Access  Camera]  button  is  clicked,  live  images  of  the  selected  camera  will  be  dis- played.
  •  It is possible to change the "Camera list" display between IPv4 addresses and IPv6 addresses  in...

37
Before asking for repairs, check the symptoms with the following table. 
Contact your dealer if a problem cannot be solved even after checking and trying the solution in th\
e 
table or a problem is not described below. 
SymptomCause/solutionReference 
pages
Power is not turned on. 
  •  Are the PoE device and the network  cable of the camera connected using a 
LAN cable?
  →  Check whether the connection is 
appropriately established.
  •  Depending on the PoE device, the  power supply will stop when...

38
• Basic
Power source: PoE (IEEE802.3af compliant)
Power consumption:  PoE 48 V: 56 mA (Class 1 device)
Ambient operating temperature:  -30 °C to +50 °C {14 °F to 122 °F}
Ambient operating humidity:  Less than 90 % (no condensation)
Waterproof:  Camera: IP66 (IEC60529)
   *  Only when installation work specified in this book is properly 
performed and appropriate waterproof treatment is performed 
Shock resistance:   Compliant with 50 J IEC60068-2-75
Dimensions:  ø109 mm x 47 (H) mm 
{ø6-15/32 inches x...

39
Max. 10/30s, Max. 16/30s
Day & Night (electrical):  Off/Auto
White balance:  ATW1/ ATW2/ AWC
Digital noise reduction:  High/Low
Video analytics
   Face detection:  On/Off (with the XML notification setting)
Privacy zone:  On/Off (up to 2 zones available)
VIQS:   On/Off
Camera title on screen:  Up to 20 characters (alphanumeric characters, marks)  On/Off
Video motion detection 
   (VMD alarm):  On/Off, 4 areas available
 
• Lens
Zoom ratio:  1x 
Extra zoom: 2x (under VGA resolution)
Focal length:  1.95...

40
Image compression method*1:   Frame rate: 
   1fps/ 3fps/ 5fps/ 7.5fps/ 10fps/ 12fps*/ 15fps/ 20fps/ 30fps 

   
* E model only 

 
JPEG (MJPEG) 

   
Image quality:  

     
0 SUPER FINE/ 1 FINE/ 2/ 3/ 4/ 5 NORMAL/ 6/ 7/ 8/ 

 
9 LOW (10 steps: 0-9)
 

 
T
 ransmission type: PULL/PUSH
Transmission interval:
 
0.1 fps - 30 fps (JPEG frame rate will be r
 estricted when dis-
playing both JPEG and H.264 images.)
Bandwidth control:
 
Unlimited/ 64kbps/ 128kbps/ 256kbps/ 384kbps/ 
  
512kbps/ 768kbps/...