Panasonic Network Camera Wv Sc384 Wv Sc385 Installation Guide

Place the camera upside-down on a desktop without fixing SC385
Use it as a simple desktop device at meetings and on other occasions.
Place the camera on a level place not subject to vibrations.
Ensure that the camera does not fall.
When  using  the  camera  upside-down,  select  "On  (desktop)"  for  "Upside-down"  on  the  [Cam.  Function]  tab  of  the  setup 
menu. (☞ Operating Instructions (PDF))
Pass  the  power  cable  from  a  12  V  DC  power  supply  (accessory)  through  the...

WV-Q154S (option)Embedded box(locally procured)
Camera
Anchor bolt 
(locally procured)Anchor bolt 
(locally procured)
Roof space
Safety wire angle
Safety wire
WV-Q155S (option)
Decorative cover
Camera
Inner cover
Dome cover
Ceiling board such as plaster board
Installation examples
The following are installation examples in which a mount bracket (option) is used with\
 this camera. 

• Embedded box (locally procured)
• Concrete

• Strong wall
22 

Safety wire angleAnchor bolt
Safety wire WV-Q105 (option)
Mounting screws (4 pcs, WV-Q105 supplied)
WV-Q156S (option)
Ceiling board such as plaster board
Camera Inner cover
Dome cover
WV-SC385

23 

Connection example
When connecting with a PC directly

LAN cable (category 5 or better, cross, STP*)
* PAL model only
When connecting to a network using a PoE hub

LAN cable (category 5 or better, straight, STP*)
* PAL model onlyImportant:
	 •	 The	 video	monitor	 is	used	 for	checking	 the	adjustment	 of	the	 angular	 field	of	view	 when	 installing	 the	camera	 or	when	
servicing. It is not provided for recording/monitoring use. 
	 •	 Depending	on	the	monitor,	some	characters	(camera	title,	preset	ID,...

Step 4
Rotate  the  camera  counterclockwise  to  detach  the  cam-
era from the camera mount bracket (accessory). 
Important:
	 •	 When	 detaching	the	camera	 from	the	camera	 mount	
bracket,  hold  the  base  of  the  camera.  Detaching  the 
camera  while  holding  the  moving  part  may  result  in 
malfunction. 
 
Step 5
Detach the cables from the camera. 
Step 6
Detach the safety wire from the camera. 
Detach the camera
The camera is fixed on the camera mount bracket using the fixing screw. Remove...

Insert/remove an SDHC/SD memory card
How to insert an SDHC/SD memory card
Important:
	 •	 Before	inserting	the	SDHC/SD	memory	card,	turn	off	the	power	of	the	camera	first.	
	 •	 When	inserting	an	SDHC/SD	memory	card,	make	sure	the	direction.	
	 •	 When	 the	SDHC/SD	 memory	card	is	inserted	 or	removed	 with	the	power	 on,	data	 in	the	 SDHC/SD	 memory	card	may	
be damaged. 
Step 1
Push  the  left  corner  of  the  Panasonic  logo  plate  on  the 
front  panel  to  unlock  the  SDHC/SD  memory  card  slot...

How to remove the SDHC/SD memory card
Important:
	 •	 Before	 removing	the	SDHC/SD	 memory	card,	select	 "Not	use"	for	"SD	 memory	 card"	on	the	 [SD	 memory	 card]	tab	of	
the "Basic" page on the setup menu first. (☞ Operating Instructions (PDF))
Step 1
Open  the  SDHC/SD  memory  card  slot  cover  by  following 
steps 1 and 2 of the "How to insert an SDHC/SD memory 
card" section. 
Step 2
Push the SDHC/SD memory card until a click is heard and 
then pull the SDHC/SD...

Configure the network settings
Install the software
Before installing the software, refer to the readme file on the provided CD-ROM first. 
Software included on the provided CD-ROM
	 •	 Panasonic	IP	setting	software
   Configure the network settings of the camera. Refer to the following for further\
 information. 
	 •	 Viewer	Software	"Network	Camera	View	4S"
    It  is  necessary  to  install  the  viewer  software  "Network  Camera  View  4S"  to  display  images  on  a  PC.  Install...

Step 1
Start the Panasonic IP setting software by double-clicking 
the "EasyIpSetup.exe" icon on the provided CD-ROM.
The  License  Agreement  will  be  displayed.  Read  the 
Agreement  and  choose  "I  accept  the  term  in  the  license 
agreement", and click "OK".
Step 2
Click  the  [Network  Settings]  button  after  selecting  the 
MAC address/IP address of the camera to be configured.
Note:
	 •	 When	 using	a	DHCP	 server,	 the	IP	address	 assigned	
to  the  camera  can  be...

Troubleshooting
Before asking for repairs, check the symptoms with the following table. 
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is 
not described below. 
SymptomCause/solutionReference 
pages
Power is not turned on.  When using DC power supply
	•	 Is	the	12	V	DC	power	cable	plug	(accessory)	firmly	inserted	into	
the 12 V DC power terminals of the camera?
    Confirm the power plug is firmly connected. 
When using a PoE...