Panasonic Network Camera Recorder With Viewer Software BB-HNP15A Operating Instructions

Operating Instructions
41
Recorded Images Page
The timelines are displayed in the chart on the recorded images page (see page 
68). The camera name, recording time and recording mode can be checked on this 
page. Image searching, playback and data conversion can be also operated on this 
page.
1.Select [Window]  [Recorded Images] on the menu bar.
2.Click [Search].
 The window displays a list for the most recent day with recorded images.
Search window(See page 70)
Search Button
Image Timelines 
Chart...

Operating Instructions
42
Note
 When you click the search button, days that have recorded images are displayed in boldface on the calendar. Clicking one of these days displays the 
list of images for that day (see 
page 68).
 If you press [Ctrl]-[Tab] key, the windo ws will cycle through [Single-Monitoring] 
- [Multi-Monitoring] - [Multi-Playbac k] - [Recorded Images] in that order.
 You can change the items that are displayed in the playback list (see page 91). 

Operating Instructions
43
Multi-Playback Page
The recorded images that are selected in the recorded images page are 
simultaneously playback on the multi-playback page.
 
To display images in the multi-playback page, set the playback time and select the 
recorded images in the recorded images page (see 
page 72). 
You can change the screen layout to display, 1 screen or 4 screens (see page 88). 
In the 4-screen layout, you can simultaneously playback the recorded images of 4 
cameras. You can select the...

Operating Instructions
44
Settings Page 
From the settings page, you can configure the environment settings, register and 
delete cameras, configure camera settings, and add and delete timers.
1.Select [Window]  [Settings] on the menu bar.
Search Camera (See page 21)
Add Camera (See page 20)/Delete Camera (See page 125) 
Add Timer (See page 60)/Delete Timer (See page 127)
Importing/Exporting the Camera Information (See page 122)
Configure settings for individual cameras (see page 20). The configuration...

Operating Instructions
45
[Settings List Display]
The settings list is displayed in tree form.
[OK Button, Cancel Button, Apply Button]
[Setting Change Icon Display]
When you change a setting, a mark is di splayed on the icon for the item that you 
changed.
 
The mark is deleted after the setting is applied by clicking [OK] or [Apply].  
If the settings window is closed (e.g., by clicking [Cancel]) while the mark is 
displayed, the setting change will not be applied.
Apply changes to the settings and...

Operating Instructions
46
Camera Operation Bar
You can display the camera operation bar and operate the camera (see page 53).
1.Click the camera screen that you want to operate.
2.Select [Window]  [Camera Operation] on the menu bar.
 The camera operation bar of the selected camera is displayed.
Note
The display of the operation bar will differ depending on the camera type.
You can move the location of the operation bar by dragging 
(moving the mouse while holding down the left button) on the title. 

Operating Instructions
47
Menu Bar
To Next Image
To Previous ImageDisplay the next image. 
(previous image in reverse playback)
Display the previous image. 
 (next image in reverse playback)
File
Layout
Recording
Exit
Next Page
Start Recording
Start Motion Detection
Recording
Stop Recording Alarm/Sensor Recording
Start All
Start Alarm 1/Sensor
Start Alarm 2
All Camera
Enable 
Disable 
Enable 
Disable 
Selected Camera Next Camera
Previous Camera
Previous Page
Select All
Clear All
Close Operation Window...

Operating Instructions
48
Note
When a cameras address is an IPv6 address (see page 23), the camera’s top 
page cannot be opened from the Camera Portal Site on the menu bar. 
To open the cameras top page, enter the URL registered with the IPv6 Domain 
Name Service for the camera address.
Display Mode
Window
Multi-MonitoringFull Screen Mode
Change the display to full screen mode.
ShrinkShrink the size of the display of the selected 
camera’s image.
ExpandExpand the size of the display of the selected...

Operating Instructions
49
Icon of Toolbar and Slide Window
Note
If you drag the toolbar right or left, icons displayed on the toolbar will be changed.
Move the focus to the previous 
camera. (Enable if there is a 
previous camera and disable if 
there is not a previous camera). Close the operation window.
Set the volume of the selected 
camera (see page 86) .
Operate remote acce ss 
(see page 108).
Reconnect to t he server 
(see page 113).
Change the display to full 
screen mode.
Change the display to...

Operating Instructions
50
2.3 Monitoring the Camera
2.3.1 Multi-Monitoring Page
After registering a camera, the camera’s images are displayed on the multi-
monitoring page.
Note
 The camera that is selected on the multi-monitoring page is the focus camera.
 The camera images are displayed in 4-screen layout (2 rows x 2 columns) in the order that they  are registered (see 
page 79).
 If the number of registered cameras e xceeds the limit of screens in a window, 
extra pages are automatically created to...